connection solution featuring SHOU HAN TYPE-C 16P CB1.6 073 with DC20V 3A rating and temperature range
Manufacturer:
SHOU HAN
Description:
USB-C (USB TYPE-C) Receptacle Connector 16 Position Recessed Mount
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
16P
Mounting Type:
沉板
Current Rating:
3A
Voltage Rating:
5V
Detection Color:
黑色
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-C
Connect-Disconnect Life:
5千次
Gender:
母
Mfr. Part #:
TYPE-C 16P CB1.6 073
Package:
SMD
Model Number:
TYPE-C 16P CB1.6 073
Introduction
TYPE-C 16P CB1.6 073
This specification document outlines the requirements for the TYPE-C 16P CB1.6 073 product from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's technical specifications, including electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.
Product Attributes
- Brand: SHOUHAN TECHNOLOGY
- Origin: Shenzhen, China
- Model: TYPE-C 16P CB1.6 073
Technical Specifications
| Item | Test Conditions | Performance | |||
|---|---|---|---|---|---|
| RATING () | |||||
| DC Rating | DC20V 3A | ||||
| PRACTICAL TEMPERATURE RANGE () | |||||
| Temperature Range | -30~80C | ||||
| STANDARD ATMOSPHEIC CONDITIONS () | |||||
| (1) Between Body and Conductor | (1) | Temperature | 5C TO 35 | ||
| (2) Between Conductors Not to be Contact | (2) | Humidity | 45% TO 85% | ||
| (3) Pressure | (3) | Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL () | |||||
| 1 | CONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | Force | 0.5-1.5Kgf |
| 2 | DISCONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | Force | 0.8-1.5Kgf |
| 3 | TERMINAL STRENGTH () | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | 1 0.1N/m(1kgf/cm). | Condition | No damage, meets electrical & mechanical characteristics |
| ELECTRICAL () | |||||
| 3.1 | CONTACT RESISTANCE () | Measured at small current (100mA or less) 1000Hz | 100 m A | Resistance | 40m MAX |
| 3.2 | INSULATION RESISTANCE () | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100V DC 1 1 2 3 | Resistance | 100M MIN |
| 3.3 | DIELECTRIC STRENGTH () | AC 100V ims(50~60Hz)for 1 min trip current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | AC 100V 50Hz/min 1 0.5mA, : (1) (2) (3) | Condition | Without damage to parts arcing or breakdown etc |
| DURABILITY () | |||||
| 4.1 | SOLDERABILITY TEST () | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | 1mm ,2505,5 0.5 13 275% | Condition | Wetting time 3 sec, Soldering area 75% |
| 4.2 | RESISTANCE TO SOLDERING HEAT TEST () - REFLOW | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | :180. :260520 | Condition | Without deformation of case or excessive looseness of terminals, meets electrical characteristics |
| 4.2 | RESISTANCE TO SOLDERING HEAT TEST () - IRON | Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | 3305 30.5 | Condition | Without deformation of case or excessive looseness of terminals, meets electrical characteristics |
| 4.3 | HUMIDITY TEST () | The jack shall be stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | 402 90~96% Hr 96 1 | Condition | Meets appearance, mechanical and electrical characteristics |
| 4.4 | HEAT TEST () | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. | 70296 1 | Condition | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| 4.5 | COLD TEST () | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | -25396 1 | Condition | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| 4.6 | LIFE TEST () - WITHOUT LOAD | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | Plug()1 10-255000 | Condition | Meets mechanical and electrical characteristics |
| 4.6 | LIFE TEST () - LOAD | At rating condition (non-inductive load) connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | ()1 10-20 5000 (1) 0.1 (2) 0.8~2.0N (3) :, | Condition | Contact Resistance 0.1, Disconnection Force 0.8-2.0N, Meets Mechanical & Electrical Characteristics |
| 4.7 | TEMPERATURE CYCLING TEST () | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | 5 30 | Condition | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 100VAC/MIN (between terminals). |
| 4.8 | COLD & HEAT SHOCK TEST () | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | 5 30 | Condition | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 500VAC/MIN (between terminals). |
2512311636_SHOU-HAN-TYPE-C-16P-CB1-6-073_C2906290.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
