Precision SHOU HAN TYPE-C 16P QTGM027 Connector Designed for Within Standard Atmospheric Conditions
Manufacturer:
SHOU HAN
Description:
USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Number Of Ports:
1
Number Of Contacts:
16P
Mounting Type:
卧贴
Current Rating:
3A
Voltage Rating:
20V
Detection Color:
黑色
Operating Temperature:
-30℃~+80℃
Connector Type:
Type-C
Connect-Disconnect Life:
5千次
Gender:
母
Mfr. Part #:
TYPE-C 16P QTGM027
Package:
SMD
Model Number:
TYPE-C 16P QTGM027
Introduction
Product Overview
This document outlines the specifications for the TYPE-C 16P QTGM027 connector from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's ratings, operating temperature range, and performance under standard atmospheric conditions. The specification covers mechanical, electrical, and durability tests to ensure product quality and reliability.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: (Shenzhen)
- Model: TYPE-C 16P QTGM027
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| DC | 20V 3A | ||
| PRACTICAL TEMPERATURE RANGE | |||
| -30~80C | |||
| STANDARD ATMOSPHEIC CONDITIONS | |||
| (1) Temperature | 5C TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL | |||
| CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 2.0Kgf | |
| DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 0.6Kgf | |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. | No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | |
| ELECTRICAL | |||
| CONTACT RESISTANCE | Measured at small current (100mA or less), 1000Hz | 40m | |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to specified portions. | 100M | |
| DIELECTRIC STRENGTH | AC 100V rms(50~60Hz) for 1 min, trip current: 0.5mA. Tested between specified portions. | Without damage to parts, arcing or breakdown etc. | |
| DURABILITY | |||
| SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. | |
| RESISTANCE TO SOLDERING HEAT TEST (REFLOW) | Preheat: Temperature on the copper foil surface should reach 180, 120s after the P.C.B entered into the soldering equipment. | Case without deformation, excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | |||
| RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON) | Bit temperature 3305, application time 30.5 seconds. However, excessive pressure shall not be applied to the terminal. | Case without deformation, excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| HUMIDITY TEST | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | ||
| HEAT TEST | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| COLD TEST | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| LIFE TEST | Without Load: Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min. | ||
| With Load (Rating Condition, Non-Inductive Load): Connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min. | |||
| (1) Contact Resistance: 0.1 (2) Disconnection Force: 0.8 to 2.0N (3) Mechanical and Electrical Characteristics: Shall be satisfied. | |||
| TEMPERATURE CYCLING TEST | Subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| Temp(): 80 to -40 (details in figure) | |||
| COLD & HEAT SHOCK TEST | Subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
| Temp(): 70 to -20 (details in figure) | |||
2102241736_SHOU-HAN-TYPE-C-16P-QTGM027_C2681552.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
