electrical connector rated DC 30V 1.5A SHOU HAN 8.5 CB1.9ZB suitable for temperature range minus 25 to 85 degrees
Product Overview
This specification document outlines the technical details for the 8.5 CB1.9ZB product from Shenzhen Shouhan Technology Co., Ltd. It details the product's ratings, environmental conditions for testing, and performance under various mechanical, electrical, and durability tests. This product is designed for applications requiring reliable electrical connections within a specified temperature range.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Part Number: 8.5 CB1.9ZB
Technical Specifications
| Item | Test Conditions | Performance Specification |
|---|---|---|
| RATING | ||
| Rated Value | DC 30V 1.5A | |
| Practical Temperature Range | -25~85C | |
| STANDARD ATMOSPHEIC CONDITIONS | ||
| Temperature | 5 to 35 | |
| Humidity | 45% to 85% | |
| Pressure | 86Kpa to 106Kpa | |
| MECHANICAL | ||
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 1.02Kgf MIN |
| Terminal Strength | 0.1N/m (1kgf/cm) applied for 1 min in any direction | No damage, satisfied electrical and mechanical characteristics |
| ELECTRICAL | ||
| Contact Resistance | Measured at small current (100mA or less) at 1000Hz | 30m MAX |
| Insulation Resistance | DC 100V applied for 1 min (between body and conductor, between non-contact conductors, between non-contact conductors when plug is inserted) | 1000M MIN |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between body and conductor, between non-contact conductors, between non-contact conductors when plug is inserted) | Without damage, arcing or breakdown |
| DURABILITY | ||
| Solderability Test | Terminals dipped 1mm in solder bath at 2505 for 50.5 seconds | Solder wetting time 3 sec; Soldering area 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s | No deformation of case or excessive looseness of terminals; satisfied electrical characteristics |
| Peak Temperature: 2605 within 20 seconds | ||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit Temperature: 3305 | No deformation of case or excessive looseness of terminals; satisfied electrical characteristics |
| Application Time: 30.5 seconds (no excessive pressure) | ||
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | |
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; satisfied mechanical and electrical characteristics |
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; satisfied mechanical and electrical characteristics |
| Life Test | Connection and disconnection: 5000 cycles at 10 to 20 cycles/min (non-inductive load) | Contact Resistance 0.1; Disconnection Force 0.8 to 2.0N; satisfied mechanical and electrical characteristics |
| Connection and disconnection: 5000 cycles at 10 to 25 cycles/min (no load) | ||
| Mating plugs and jacks used | ||
| Temperature Cycling Test | 5 cycles of specified temperature profile, then 30 minutes at room ambient | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: MAX.30M; Insulation Resistance: MIN.100 M; Dielectric Withstanding Voltage: 100VAC/MIN (between terminals) |
| Cold & Heat Shock Test | 5 cycles of specified temperature profile, then 30 minutes at room ambient | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: MAX.30M; Insulation Resistance: MIN.100 M; Dielectric Withstanding Voltage: 500VAC/MIN (between terminals) |
2306091457_SHOU-HAN-8-5-CB1-9ZB_C6331170.pdf