Durable SHOU HAN TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 connector with electrical insulation and waterproof protection
Product Overview
This document details the specifications for the TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 connector, manufactured by Shenzhen Shouhan Technology Co., Ltd. It is designed for applications requiring high reliability, durability, and waterproofness, meeting IPX7 standards. The connector supports a current rating of 3.0A max and a voltage of 100VAC, with a wide operating temperature range of -30~80C.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: China
- Certifications: IPX7
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| Mechanical Performance | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5-20N |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 8-20N | |
| Electrical Performance | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M MIN | |
| Dielectric Strength | AC 100V ims(50~60Hz) for 1 min, Trip Current: 0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. | |
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% |
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Temperature on the copper foil surface should reach 180. Tallest Temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 with in 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit temperature 3305, Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Life Test (No Load) | Connection and disconnection shall be made with the mating plugs and jacks for 10000 cycles at a speed of 10 to 25 cycles/min. | Mechanical and electrical characteristics shall be satisfied. | |
| Life Test (Load) | At rating condition (non-inductive load), connection and disconnection shall be made 10000 cycles at a speed 10 to 20 cycles/min. | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| Temperature Cycling Test | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| Cold & Heat Shock Test | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2507171700_SHOU-HAN-TYPE-C-6PFS-4JCB0-55-H8-2-IPX7_C3020036.pdf