Tested SHOU HAN 10.5mm AF USB offering connection disconnection force and strong terminal strength
Manufacturer:
SHOU HAN
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Positionx2 Through Hole
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Length:
10.5mm
Number Of Ports:
2
Supplementary Features:
-
Number Of Contacts:
4Px2
Mounting Type:
直插
Center Height:
-
Current Rating:
1.5A
Detection Color:
白色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Connect-Disconnect Life:
1.5千次
Gender:
母
Mfr. Part #:
10.5mm AF USB
Package:
Through Hole
Model Number:
10.5mm AF USB
Introduction
Product Overview
This document outlines the specifications for the USB-AF 10.5mm AF USB product from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's performance, electrical, and mechanical characteristics under various test conditions, including temperature range, standard atmospheric conditions, connection/disconnection forces, resistance, insulation, dielectric strength, durability, and environmental tests.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: (Shenzhen)
- Model: USB-AF 10.5mm AF USB
Technical Specifications
| Item | Test Conditions | Performance | Unit | Min | Typ | Max |
| Mechanical Characteristics | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | Kgf | 3.57 | ||
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | Kgf | 1.02 | |||
| Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | |||||
| Electrical Characteristics | Contact Resistance | Measured at small current (100mA or less) 1000Hz | m | 30 | ||
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 100V 1 min. | M | 1000 | |||
| Dielectric Strength | AC 500V ims(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 500V 1 min. | |||||
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. | ||||
| Resistance to Soldering Heat Test | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |||||
| Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr. | |||||
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. | |||||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. | |||||
| Life Test | Without Load | Connection and disconnection shall be made with the mating plugs and jacks for 1500 cycles at a speed of 10 to 25 cycles/min. | Cycles | 1500 | ||
| Load | At rating condition (non-inductive load) connection and disconnection shall be made 1500 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 7N (3) Mechanical and electrical characteristics shall be satisfied. | |||||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |||||
| Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
2411251528_SHOU-HAN-10-5mm-AF-USB_C393950.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
