Durable USB Connector SHOU HAN 10.0 QC6.3 JB Rated DC 30V 1.5A Operating Temperature Range -25 to 85C
Manufacturer:
SHOU HAN
Description:
USB-A (USB TYPE-A) Receptacle Connector 4 Position Right Angle
Category:
USB, DVI, HDMI Connector Adapters/USB, DVI, HDMI Connector Assemblies
Specifications
Length:
10mm
Number Of Ports:
1
Supplementary Features:
-
Number Of Contacts:
4P
Mounting Type:
弯插
Center Height:
-
Current Rating:
1.5A
Detection Color:
黑色
Voltage Rating:
30V
Operating Temperature:
-25℃~+85℃
Connector Type:
Type-A
Connect-Disconnect Life:
5千次
Gender:
母
Mfr. Part #:
10.0 QC6.3 JB
Package:
Through Hole,Right Angle
Model Number:
10.0 QC6.3 JB
Introduction
Product Overview
This specification details the requirements for a USB connector, model 10.0 QC6.3 JB, manufactured by SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It outlines the product's electrical, mechanical, and durability characteristics, along with testing conditions and performance standards.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO., LTD.
- Origin: China
- Model: 10.0 QC6.3 JB
- Rated Voltage: DC 30V
- Rated Current: 1.5A
- Operating Temperature Range: -25~85C
Technical Specifications
| Item | Test Conditions | Performance Specification |
| MECHANICAL | ||
| CONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 3.57Kgf MAX |
| DISCONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 1.02Kgf MIN |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | N/A |
| ELECTRICAL | ||
| CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz. | 30m MAX |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 1000M MIN |
| DIELECTRIC STRENGTH | AC 500V ims(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. Without damage to parts, arcing or breakdown etc. | 100VAC/MIN (Between terminals) |
| DURABILITY | ||
| SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less. (2) The area of soldering should be over 75%. | N/A |
| RESISTANCE TO SOLDERING HEAT TEST (REFLOW) | Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A |
| RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | N/A |
| HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | N/A |
| HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to controlled recovery. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A |
| COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to controlled recovery conditions for 1 hour. There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | N/A |
| LIFE TEST (WITHOUT LOAD) | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. (1) Contact resistance shall be 0.1. (2) Disconnection force shall be 0.8 to 2.0N. (3) Mechanical and electrical characteristics shall be satisfied. | N/A |
| LIFE TEST (LOAD) | Connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min at rating condition (non-inductive load). (1) Contact resistance shall be 0.1. (2) Disconnection force shall be 0.8 to 2.0N. (3) Mechanical and electrical characteristics shall be satisfied. | N/A |
| TEMPERATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/MIN (Between terminals). | N/A |
| COLD & HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/MIN (Between terminals). | N/A |
2306091457_SHOU-HAN-10-0-QC6-3-JB_C6331185.pdf
Related Products
Micro USB Connector with 3000 Connect-Disconnect Life, Gold Plated Contacts, and Nickel Plated Shell for High Durability
USB-Micro B Receptacle Connector 5 Position Recessed Mount
IPX8 Waterproof USB Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Durable Performance
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle
IPX8 Waterproof Type-C Connector with 6P Contacts and 3A Current Rating for Harsh Environments
USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount
Durable USB Connector Type-A with DC 30V 1.5A Rating 5000 Connect-Disconnect Life and -25℃~+85℃ Operating Temperature
USB-A (USB TYPE-A) Receptacle Connector 4 Position Through Hole
SHOU HAN MICRO 6.4ZB5.0 Micro-B Connector with 5P Contacts, 1A Current Rating, and 3000 Connect-Disconnect Life for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Mini-B USB Connector with 10P Contacts, 5000 Connect-Disconnect Life, and 30V 1A Rating for Reliable Electronic Devices
USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle
Durable Type-C 6P Connector with 5000 Mating Cycles, 3A Current Rating, and LCP UL94 V-0 Material for High-Performance Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Through Hole
High Durability Type-C Connector with 6P Contacts and 5000 Connect-Disconnect Life for Reliable Electrical Applications
USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount
Durable Type-C Connector with Stainless Steel Housing, Gold Plated Terminals, and 5000 Mating Cycles for Reliable Performance
USB-C (USB TYPE-C) Receptacle Connector 2 Position Through Hole
Robust Micro-B USB Connector with Gold Plated Contact, 10000 Connect-Disconnect Life, and LCP UL94V-0 Plastic for Reliable SMD Applications
USB-Micro B Receptacle Connector 5 Position Surface Mount, Right Angle
Send RFQ
Stock:
MOQ:
