2 Piece Power Connectors TE Connectivity 6450140-5 for Power Supplies Servers and Telecommunications
2-Piece Power Connectors
TE Connectivity's 2-Piece Power Connectors offer robust solutions for various power connection needs, including board-to-board, wire-to-board, wire-to-wire, bus bar, and card edge applications. These connectors are designed to handle significant current and voltage requirements, with many models supporting hot-pluggable functionality for applications that require mating under electrical load. Typical applications include power supplies, servers, telecommunications, data storage, and battery interconnects.
Product Attributes
- Brand: TE Connectivity
Technical Specifications
| Product Family | Application | Current Rating | Key Features | Reference Part Numbers |
|---|---|---|---|---|
| MULTI-BEAM XLE | Hot Swappable Power Supplies (500W5KW), Cable Power | Up to 75 A* (power contact), Up to 50 Amps (cable receptacle) | 6 beam power contact, 25A low power contact, slim guide sockets, vented housing, hot-plug capable, X, Y, Z float mount, blind-mate, panel mount, slide-to-lock, squeeze-to-release | 6450830-2, 6450850-2 (Connector), te.com/products/multibeamxle |
| FLATPAQ | Hot Swappable Power Supplies (500W5KW) | 32 Amps* | 32 Amp CROWN BAND power contacts, true hot-plug, modular design, solder and compliant press-fit termination, active guide pins | 6646597-1, 6646722-1 |
| MINIPAK HDL | Hot Swappable Power Supplies (500W5KW), Backplanes | Up to 40 Amps* | High-density, low profile, power/signal, blind-mate, reduced airflow impedance, hot-pluggable, >150 amps per linear inch | 2-1926732-5, 2-1926733-5, 1926845-6, te.com/products/minipakhdl |
| Battery Interconnects | Rechargeable Batteries (portable/hand-held electronic devices) | 7 Amps/single contact at 30 T-Rise | Choice of right angle or vertical mount headers, left, right or keyless polarization, 5 mm pitch headers | 1827684-1, 1827654-1, 1-1123688-7, 6123978-1, 120591-1, 5787430-1, 5787441-1 |
| Universal Power Module (UPM) | Backplanes | Standard 10 Amp, High current 16 Amp | Standard, high current, slim, low profile varieties, 2 performance levels, true hot-plug, high reliability (up to 250 cycles), right angle, vertical, coplanar, mezzanine configurations | 1903977-1 (Slim UPM), 1645498-2 (Vertical Plug), 5646954-2 (R/A Plug), te.com/products/upm |
| MULTIGIG RT | Backplanes | 20 Amp | 2 mm backplane connectors, three contact mating lengths, 1 and 2 row versions, true hot-plug | 1-1410271-1 (Plug), 1410270-2 (Receptacle) |
| ICCON | Backplanes | 35A | With and without locking feature, slimline version (30% smaller footprint), board-to-board, boardto-busbar, wire-to-board, quick connect/disconnect | 6643274-1 (Vertical Pin), 6643228-1 (R/A Pin), 6643220-1 (SLIMLINE Socket), te.com/products/iccon |
| MINIPAK HDE | Backplanes | 18 Amps per contact, >250 Amps/linear inch | High current density, two levels of contact sequencing (mate-first-break-last) | 1926226-1 (2x6), 1926229-1 (2x9), te.com/products/minipakhde |
| Stacked ICCON | Backplanes | Up to 200 Amps per inch | Very High Current Density, occupies less PCB edge space, right angle connector, ground pin, power pin, mate-first-break-last pin options | 2085181-1 (R/A Socket), 1766663-1 (Vertical Pin) |
| ET POWER | Cable Power | Up to 35 Amps | Low profile (<8mm above PCB), cable-to-PCB, positive latch retention, right angle and vertical mounts, end-to-end stackability | te.com/products/etpower |
| RAPID LOCK | Cable Power | 50-250 Amps | BusBar Quick Connect/Disconnect, locking feature retains each contact, no installation tools required, fast replacement for power lugs | te.com/products/rapidlock |
| High Current Universal MATE-N-LOK II | Cable Power | Up to 35 Amps | 2-15 circuit sizes, free hanging, panel mount, wire-to-board, Louvertac band and screw machined contacts, no extraction tools required, pin and sockets intermixed | te.com/products/universalmatenlok |
| AMP Power Series | Cable Power | 15-275 Amps | Single & 2 pole, quick connect/disconnect, rugged contact design, open barrel contacts (6-20AWG on reels) | te.com/products/amppowerseries |
| Wave Crimp Flat Cable | Cable Power | 40-110 Amps | Flat cable, dissipates heat better, no stripping required, reliable low resistance gas tight interface, lower operating temperature, easily formed, lower cost than bus bars | |
| Z1 Power Connector | Industry Standards | Advanced TCA | 1766500-1 | |
| MINIPAK HD Guide Hardware | Industry Standards | PICMG MicroTCA.0, VITA 41.0 VXS, VITA 46.0 VPX | 1-1469373-1, 1469920-1, 1410465-1, 1410956-1, 6450843-6 |
2411041552_TE-Connectivity-6450140-5_C20477226.pdf
TE Connectivity MULTIGIG RT 2 High Speed Differential Connector with 10-Gbps Data Rates and Nearly Zero Intra Pair Skew for VPX Standard
2 Position Right Angle Connector TE Connectivity 1982295-2 ELCON Mini Power Interconnect 40 Amp Rated
Durable mini power interconnect TE Connectivity 2204585-4 with positive metal latch retention feature
guide module TE Connectivity 6469287-1 supporting scalable backplane environments in AdvancedTCA systems
Compact and Robust 2 Piece Power Connectors TE Connectivity 6450120-2 for Wire to Board Connections
| Image | Part # | Description | |
|---|---|---|---|
|
|
TE Connectivity MULTIGIG RT 2 High Speed Differential Connector with 10-Gbps Data Rates and Nearly Zero Intra Pair Skew for VPX Standard |
Through Hole,P=1.8mm Specialized Connectors
|
|
|
|
2 Position Right Angle Connector TE Connectivity 1982295-2 ELCON Mini Power Interconnect 40 Amp Rated |
1 2P 40A Through Hole,Right Angle,P=7.8mm Specialized Connectors RoHS
|
|
|
|
Durable mini power interconnect TE Connectivity 2204585-4 with positive metal latch retention feature |
1 3P 35A Specialized Connectors RoHS
|
|
|
|
guide module TE Connectivity 6469287-1 supporting scalable backplane environments in AdvancedTCA systems |
Specialized Connectors RoHS
|
|
|
|
Compact and Robust 2 Piece Power Connectors TE Connectivity 6450120-2 for Wire to Board Connections |
Specialized Connectors RoHS
|