BOOMELE Boom Precision Elec GH1.25-2PLTPZ 1.25mm Pitch Bar Connectors Providing Electrical Connectivity
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
1x2P Tin 1.25mm 50V 2 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=1.25mm Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x2P
Contact Plating:
锡
Pitch:
1.25mm
Contact Material:
PA6T;磷青铜
Voltage Rating (Max):
50V
Number Of PINs Per Row:
2
Number Of Rows:
1
Mounting Type:
立贴
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
GH1.25-2PLTPZ
Package:
SMD,P=1.25mm
Model Number:
GH1.25-2PLTPZ
Introduction
Product Overview
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics under various environmental conditions.
Product Attributes
- Product Name: Bar Connectors
- Material - Main Body: LCP
- Material - Terminal: Brass
- Terminal Surface Treatment: Tin Plated
Technical Specifications
| Item | Specification | Details |
|---|---|---|
| Models | ||
| Part Number Suffix | PWB | GH1.25-2PWB, GH1.25-3PWB, GH1.25-4PWB, GH1.25-5PWB, GH1.25-6PWB, GH1.25-7PWB, GH1.25-8PWB, GH1.25-9PWB, GH1.25-10PWB, GH1.25-11PWB, GH1.25-12PWB, GH1.25-15PWB, GH1.25-NPWB |
| Part Number Suffix | PLT | GH1.25-2PLT, GH1.25-3PLT, GH1.25-4PLT, GH1.25-5PLT, GH1.25-6PLT, GH1.25-7PLT, GH1.25-8PLT, GH1.25-9PLT, GH1.25-10PLT, GH1.25-12PLT, GH1.25-15PLT, GH1.25-NPLT |
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 1.0A | [AC (virtual value) / DC] |
| Ambient Temperature Range | -25 to +85 | |
| Performance - Electrical | ||
| Contact Resistance | 20 m MAX | Measured in mated condition, open voltage 20mV MAX, short circuit current 10mA. |
| Insulation Resistance | 500 M MIN | Measured in mated condition, apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Measured in mated condition, apply 500V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Insertion Force | 5 * n (N) MAX | Insert and extract at a speed of 253mm/minute. 'n' represents the number of positions. |
| Withdrawal Force | 0.3 * n (N) MIN | Insert and extract at a speed of 253mm/minute. 'n' represents the number of positions. |
| Terminal Retention Force | 10 N MIN | Pull the terminal outwards at a speed of 253mm/minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX; Appearance: No Damage | Actuator up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Discontinuity: 1 ms MAX; Appearance: No Damage | With DC 1mA energized; vibration along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours each axis. |
| Shock | Discontinuity: 1 ms MAX; Appearance: No Damage | With DC 1mA energized; 490m/s {50G} shock in 6 directions; 3 times each. |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | Stored in 852 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | Stored in -402 air for 96 hours, then returned to room temperature for 1-2 hours. |
| Dielectric Strength | Must meet 4.1.3 | |
| Humidity | Insulation Resistance: 100 M MIN; Appearance: No Damage | Stored in 402, 90-95% RH air for 96 hours, then measured within 0.5 hours at room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | 5 cycles of: -553 for 30 minutes, room temp/humidity for 10-15 minutes, 852 for 30 minutes, room temp/humidity for 10-15 minutes. |
| Salt Spray | Contact Resistance: 60 m MAX | 484 hours exposure to 51% salt solution at 352. Washed with tap water and dried at room temperature after test. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% coverage | Terminal tip immersed in 2355 tin bath for 20.5 sec. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Subjected to 2605 hot air for 305 sec, at least 5 times. |
2510291500_BOOMELE-Boom-Precision-Elec-GH1-25-2PLTPZ_C2829260.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
