BOOMELE Boom Precision Elec EH 6A 2.5mm Pitch Wire to Board Connectors with Right Angle SMT Headers
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 6 position 2.5mm Pitch
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
3.91mm
Reference Series:
EH
Pins Structure:
1x6P
Contact Plating:
-
Contact Material:
-
Operating Temperature:
-55℃~+105℃
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
6
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
17.5mm
Z-Height Of The Board:
5.36mm
Row Spacing:
-
Mounting Type:
直插
Mfr. Part #:
EH-6A
Package:
Through Hole,P=2.5mm
Model Number:
EH-6A
Introduction
Product Overview
The EH SERIES 2.5mm Pitch Wire-to-Board Connector series is designed for reliable electrical connections in various applications. This series offers a compact 2.5mm pitch, suitable for space-constrained designs. Key features include robust electrical and mechanical performance, ensuring stable connectivity under specified operating conditions. The connectors are available in different configurations, including right-angle SMT (Surface Mount Technology) headers and housings, catering to diverse board assembly requirements. They are engineered to meet stringent industry standards for performance and durability.
Product Attributes
- Brand: BOOMELE
- Series: EH SERIES
- Pitch: 2.5mm
- Technology: SMT (Surface Mount Technology)
- Compliance: Lead Free
Technical Specifications
| Category | Item | Specification | Test Condition |
|---|---|---|---|
| Ratings and Applicable Wires | Rated Voltage (MAX.) | 250V | Ø1.0mm MAX. Insulation O.D. |
| Rated Current (MAX.) and Applicable wires | 2.5A (AWG #22 to #32) | ||
| Ambient Temperature Range | -25 to +85 | (*1 Including terminal temperature rise) | |
| Applicable Wire Gauge | AWG #22 - #32 | ||
| Electrical Performance | Contact Resistance | 20 milliohm MAX. | Mate connectors, measure by dry circuit, 10mV MAX., 25mA (JIS C5402 5.4) |
| Insulation Resistance | 100 Megohm MIN. | Apply 500V DC between adjacent terminals or terminal and ground (JIS C5402 5.2/MIL-STD-202 Method 302) | |
| Dielectric Strength | No Breakdown | Apply 800V AC (rms) between adjacent terminals or terminal and ground for 1 minute (JIS C5402 5.1/MIL-STD-202 Method 301) | |
| Contact Resistance on Crimped Portion | 5 milliohm MAX. | Crimp the applicable wire to the terminal, measure by dry circuit, 10mV MAX., 25mA | |
| Mechanical Performance | Insertion and Withdrawal Force (Connector) | Refer to paragraph 7 | Insert and withdraw connectors at the speed rate of 25+3mm/minute. |
| Crimping Strength | AWG #22: 9.8 N (1.0kgf) MIN. AWG #32: 4.9 N (0.5kgf) MIN. | Fix the crimped terminal, apply axial pull out force on the wire at the speed rate of 25+3mm/minute. | |
| Terminal Insertion Force (into Housing) | 4.9 N (0.5kgf) MAX. | Insert the crimped terminal into the housing. | |
| Terminal/Housing Retention Force | 4.9 N (0.5kgf) MIN. | Apply axial pull out force to the terminal assembled in the housing at the speed rate of 25+3mm/minute. | |
| Performance (Environmental & Durability) | Mechanical Life | Contact Resistance: 40 milliohm MAX. | Mated up to 30 cycles repeatedly at 10 cycles per minute. |
| Temperature Rise | 30 MAX. | Carrying rated current load (UL 498) | |
| Vibration | Appearance: No Damage Contact Resistance: 40 milliohm MAX. Discontinuity: 1.0 microsecond MAX. | Amplitude 1.5mm P-P, 10-55-10 Hz in 1 minute, 2 hours in each X.Y.Z axes (MIL-STD-202 Method 201) | |
| Shock | Appearance: No Damage Contact Resistance: 40 milliohm MAX. Discontinuity: 1.0 microsecond MAX. | 490m/s {50G}, 3 strokes in each X.Y.Z axes (JIS C60068-2-27/MIL-STD-202 Method 213) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 40 milliohm MAX. | Place in environment of 83 to 87 for 96 hours (JIS C60068-2-2/MIL-STD-202 Method 108) | |
| Reflow Soldering Condition | Peak Temperature | 250 MAX. | |
| Time above 230 | 30 SEC. (230 MIN.) | ||
| Total Time | 120 SEC. | (Pre-heat: 150200) | |
| Product Models/Components | Terminal | (AWG #22-32) | |
| Housing | EH-Y | ||
| Wafer Assembly (R/A) | EH-A (Lead Free) | Plastic Package |
2410121246_BOOMELE-Boom-Precision-Elec-EH-6A_C64410.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
