connector strip BOOMELE Boom Precision Elec HY 4P supporting multiple wire sizes and PCB thicknesses
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 4 position 2mm Pitch Surface Mount, Right Angle
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
-
Reference Series:
HY
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Supplementary Features:
-
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
-
Z-Height Of The Board:
-
Row Spacing:
-
Mounting Type:
卧贴
Mfr. Part #:
HY-4P
Package:
SMD,P=2mm,Surface Mount,Right Angle
Model Number:
HY-4P
Introduction
Product Overview
The HY series connector strip is designed for reliable electrical connections, featuring robust materials and adherence to international testing standards. It is suitable for applications requiring stable performance across a wide temperature range and supports various wire sizes and PCB thicknesses. Key applications include general electrical equipment and electronic devices where dependable connectivity is essential.
Product Attributes
- Product Series: HY Series
- Certifications: RoHS
Technical Specifications
| Section | Item | Description/Specification | Requirement/Value | ||
|---|---|---|---|---|---|
| 1. SCOPE | Applicable Product | HY series connector strip | Product performance, test methods and inspection requirements | ||
| Applicable Standards | GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General Principles | |||
| GB/T2423 | Electrical Connectors Environmental Testing Methods | ||||
| GB/T2424 | Electrical Connectors Environmental Testing Guidelines | ||||
| 3. USE CONDITION | Ambient Temperature Range | -25+85 | |||
| Applicable Wire Sizes | AWG#24#30 | ||||
| Applicable PC Board Thickness | 0.8~1.6mm | ||||
| 4. Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust, plating not oxidized and not peeled. | |||
| Dimension | According to drawings | ||||
| Exchangeability | Same specification products should be exchangeable. | ||||
| 5. Material | Part Name | Type | Material | Finish | Explanation |
| Terminal | Contact | Phosphor bronze (0.20mm thick) | Tin Plating: 3~5m | ||
| Housing | Plastic | Nylon66 UL94V-0, Color: White | |||
| Wafer | Contact | Brass (0.50mm thick) | Tin Plating: 2.5~5m | ||
| Housing | Plastic | Nylon66 UL94V-0, Color: White | |||
| Wafer | Contact | Brass (0.50mm thick) | Tin Plating: 2.5~5m | ||
| Housing | Plastic | LCP UL94V-0, Color: Beige | |||
| Wafer | Solder tab | Brass (0.40mm thick) | Tin Plating: 3~5m | ||
| Housing | Plastic | LCP UL94V-0, Color: Beige | |||
| 6. Electrical Performance | Rated Current | 2A (AC/DC) | |||
| Rated Voltage | 250V (AC/DC) | ||||
| Contact Resistance | Test Mode: Mate connector, 20mV max voltage, 100mA max current | Initial value: 20m (Excludes wire resistance) | |||
| Withstand Voltage | Test Mode: 1000V AC (rms) for 1 minute between adjacent terminals and ground | No breakdown or flashover; Leakage current 0.5mA | |||
| Insulation Resistance | Test Mode: 500V DC (rms) for 1 minute between adjacent contacts | 1000 M | |||
| 7. Mechanical Performance | Terminal crimping wire strength | Test Mode: Axial pullout force at 25 3mm/min rate | AWG#24: 30N AWG#26: 20N AWG#28: 13N AWG#30: 8N | ||
| Fixed terminals and hole seat | Test Mode: Pullout force along wire direction at 25 3mm/min rate | Per contact: 15N | |||
| Single contact insertion force | Test Mode: Insertion force at 25 3mm/min rate | 6N | |||
| Single contact withdrawal force | Test Mode: Pullout force at 25 3mm/min rate | 0.5N | |||
| Pin Retention force | Test Mode: Pullout force at 25 3mm/min rate on pin end | Per contact: 15N | |||
| 8. Endurance Characteristics | Durability | Test Mode: 30 cycles (max 10 cycles/min) before environmental test | Contact Resistance: 30m | ||
| Vibration | Test Mode: Connector on PCB, 10-55-10 Hz/min, 1.5mm p-p amplitude, 2 hours per axis (X, Y, Z) | Appearance: No damage Contact Resistance: 30m Current Discontinuity: 1sec Max | |||
| 9. Environmental Performance | Thermal Aging | Test Mode: 852 for 96 hours | Appearance: No damage Contact Resistance: 30m | ||
| Temperature Rise | Test Mode: Measure contact temperature rise at max rated current | 30 Max | |||
| Humidity | Test Mode: 402, 90-95% RH for 96 hours | Appearance: No damage Contact Resistance: 30m Insulation Resistance: 500M Withstand Voltage: No breakdown or flashover | |||
| Temperature Cycling | Test Mode: 5 cycles (-553 for 30min, 853 for 30min, with transition time) | Same as Humidity test | |||
| Salt Spray | Test Mode: 353, 51% solution; 8 hours (plated after stamping) or 48 hours (stamping before plating) | Appearance: No damage Contact Resistance: 30m | |||
| Solderability | Test Mode: Immersion in solder at 2455 for 30.5S | Area of Soldering: 90% | |||
| Resistance to soldering heat | Test Mode: Manual soldering (3055, 30.5S) or Wave soldering (2305, 50.5S) or Reflow soldering (2555, 20S Max) | Appearance: No damage | |||
| 10. Caution | Plastic parts are hygroscopic. Avoid exposure to temperatures >30 and humidity >60% RH after opening packaging. Use within 24 hours to prevent foaming/deformation during reflow/wave soldering. | ||||
| 11. Packaging, Transportation, Storage | Packaging | Terminal: Disc loading material packaging. Housing: Plastic bags. Wafer: Tray or bag packaging. Includes certificate with product name, specifications, quantity, production date. Exterior: Carton with packing list. Product must not move within the box. | |||
| Transportation | Any vehicle. Must be moisture-proof and protected from mechanical damage. Transport temperature: -20~+50. | ||||
| Storage | Ambient temperature: -10 to +40, Relative humidity 80%. Store in a warehouse free of acidic, alkaline, or corrosive gases. Storage duration: 6 months. Re-qualification test required after 6 months. | ||||
2410121310_BOOMELE-Boom-Precision-Elec-HY-4P_C146060.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
