2.5mm Pitch Wire to Board Connector BOOMELE Boom Precision Elec XH 20A Terminal Housing Wafer Assembly
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 20 position 2.5mm Pitch Through Hole
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.8mm
Reference Series:
XH
Pins Structure:
1x20P
Contact Plating:
-
Contact Material:
-;-
Operating Temperature:
-55℃~+105℃
Flame Retardant Rating:
-
Supplementary Features:
-
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
20
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
-
Z-Height Of The Board:
7mm
Row Spacing:
-
Mounting Type:
直插
Mfr. Part #:
XH-20A
Package:
Through Hole,P=2.5mm
Model Number:
XH-20A
Introduction
Product Overview
This specification covers the 2.5mm pitch wire-to-board connector series. Designed for reliable electrical connections, these connectors are suitable for various applications requiring a 2.5mm pitch interface. The series includes terminals, housings, and right-angle wafer assemblies, all available in lead-free configurations.
Product Attributes
- Brand: BOOMELE
- Product Series: XH SERIES
- Lead Free: Yes
Technical Specifications
| Category | Item | Specification | Details |
|---|---|---|---|
| Product Identification | Product Name | Terminal, Housing, Wafer Assembly | |
| Part Number (Terminal) | XH-PT | ||
| Part Number (Housing) | XH-Y | ||
| Part Number (Wafer Assembly R/A) | XH-A/AW/AWD/AWD(K) | ||
| Ratings | Rated Voltage (MAX.) | 250V | |
| Rated Current (MAX.) | 3A (AWG #22 - #32) | ||
| Ambient Temperature Range | -25 to +85 | ||
| Max. Insulation O.D. | 1.0mm | ||
| Terminal Temperature Rise | Max. 30 (Including terminal temperature rise) | ||
| Electrical Performance | Contact Resistance (mated connectors) | 20 milliohm MAX. | Test: 20mV MAX., 30mA (JIS C5402 5.4) |
| Insulation Resistance | 100 Megohm MIN. | Test: 500V DC between adjacent terminals or terminal and ground (JIS C5402 5.2/MIL-STD-202 Method 302) | |
| Dielectric Strength | No Breakdown | Test: 1000V AC (rms) for 1 minute between adjacent terminals or terminal and ground (JIS C5402 5.1/MIL-STD-202 Method 301) | |
| Contact Resistance (Crimped Portion) | 5 milliohm MAX. | Test: 20mV MAX., 30mA | |
| Mechanical Performance | Insertion and Withdrawal Force (Connectors) | Refer to paragraph 7 | Speed: 25+3mm/minute |
| Crimping Strength | AWG #22: 9.8 N (1.0kgf) MIN. AWG #32: 4.9 N (0.5kgf) MIN. | Axial pull out force on wire, Speed: 25+3mm/minute | |
| Terminal Insertion Force (into housing) | 4.9 N (0.5kgf) MAX. | ||
| Terminal/Housing Retention Force | 4.9 N (0.5kgf) MIN. | Axial pull out force, Speed: 25+3mm/minute | |
| Pin Retention Force | 4.9 N (0.5kgf) MIN. | Axial push force, Speed: 25+3mm/minute | |
| Environmental & Durability | Mechanical Life | 40 milliohm MAX. (Contact Resistance) | 30 cycles (10 cycles/minute) |
| Vibration | No Damage, 40 milliohm MAX. (Contact Resistance), 1.0 microsecond MAX. (Discontinuity) | Amplitude 1.5mm P-P, 10-55-10 Hz/min, 2 hours/axis (MIL-STD-202 Method 201) | |
| Shock | No Damage, 40 milliohm MAX. (Contact Resistance), 1.0 microsecond MAX. (Discontinuity) | 490m/s {50G}, 3 strokes/axis (JIS C60068-2-27/MIL-STD-202 Method 213) | |
| Heat Resistance | No Damage, 40 milliohm MAX. (Contact Resistance) | 96 hours at 83-87 (JIS C60068-2-2/MIL-STD-202 Method 108) | |
| Cold Resistance | No Damage, 40 milliohm MAX. (Contact Resistance) | 96 hours at -37 to -43 (JIS C60068-2-1) | |
| Humidity | No Damage, 40 milliohm MAX. (Contact Resistance), 10 Megohm MIN. (Insulation Resistance), Meets 4-1-3 (Dielectric Strength) | 96 hours at 58-62, 90-95% RH (JIS C60068-2-3/MIL-STD-202 Method 103) | |
| Temperature Cycling | No Damage, 40 milliohm MAX. (Contact Resistance) | 5 cycles (-55 for 30min, +105 for 30min) (JIS C0025) | |
| Specialized Performance | Salt Spray | No Damage, 40 milliohm MAX. (Contact Resistance) | 44-52 hours exposure to 51% NaCl solution at 352 (JIS C5028/MIL-STD-202 Method 101) |
| SO2 Gas | No Damage, 40 milliohm MAX. (Contact Resistance) | 24 hours exposure to 505ppm SO2 gas at 402 | |
| NH3 Gas | No Damage, 40 milliohm MAX. (Contact Resistance) | 40 minutes exposure to NH3 gas from 28% Ammonia solution | |
| Solderability | 95% of immersed area must show no voids, pin holes | Soldering Time: 2-3 sec, Temp: 242-248, 0.5mm from tip | |
| Soldering Heat Resistance | No Damage | Soldering iron method: Time: 2-4 sec, Temp: 370-400, 0.5mm from tip | |
| Reflow Conditions | Peak Temp: 250 MAX., 30 SEC. (230 MIN.), 120 SEC. (Pre-heat: 150200) | ||
| Dimensions & Materials | Refer to drawing | ||
2410121247_BOOMELE-Boom-Precision-Elec-XH-20A_C19605.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
