wire to PC board connector BOOMELE Boom Precision Elec HY-2P designed for stable electrical connections
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 2 position 2mm Pitch Surface Mount, Right Angle
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
-
Pins Structure:
1x2P
Reference Series:
HY
Contact Plating:
锡
Contact Material:
黄铜;PA66
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Supplementary Features:
-
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
2
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
-
Z-Height Of The Board:
-
Row Spacing:
-
Mounting Type:
卧贴
Mfr. Part #:
HY-2P
Package:
SMD,P=2mm,Surface Mount,Right Angle
Model Number:
HY-2P
Introduction
Product Overview
The HY series connector strip is designed for reliable electrical connections, offering a range of specifications for performance, testing, and environmental conditions. It is suitable for applications requiring connections between wires and PC boards, with a focus on durability and electrical integrity. The connectors are designed for use within a specified ambient temperature range and are compatible with various wire gauges and PC board thicknesses.
Product Attributes
- Product Series: HY series
- Material - Terminal Contact: Phosphor bronze (0.20mm thickness)
- Material - Housing: Nylon66 (UL94V-0), Color: White
- Material - Wafer Pin: Brass (0.50mm thickness)
- Material - Wafer Housing: Nylon66 (UL94V-0), Color: White
- Material - Wafer Pin (Alternative): Brass (0.50mm thickness)
- Material - Wafer Housing (Alternative): LCP (UL94V-0), Color: Beige
- Material - Solder Tab: Brass (0.40mm thickness)
- Material - Solder Tab (Alternative): Phosphor bronze (0.25mm thickness)
- Plating - Terminal: Tin Plating (3-5m)
- Plating - Wafer Pin: Tin Plating (2.5-5m)
- Plating - Solder Tab: Tin Plating (3-5m)
- Certifications: RoHS
Technical Specifications
| Item | Test Mode / Description | Requirement / Specification |
|---|---|---|
| 1. Scope | ||
| Applicable to | HY series connector strip, including product performance, test methods and inspection requirements. | |
| 2. Applicable Standards | ||
| 2.1 | GB/T2421 | Testing method for Environmental of Electrical Connectors Class 1: General Principles |
| 2.2 | GB/T2423 | Testing method for Environmental of Electrical Connectors |
| 2.3 | GB/T2424 | Testing method for Environmental of Electrical Connectors |
| 2.4 | GB/T5095 | Testing Procedure/method for components of electric equipment |
| 3. Use Condition | ||
| 3.1 | Ambient temperature Range | -25+85 |
| 3.2 | Applicable Wire Sizes | AWG#24#30 |
| 3.3 | Applicable PC board thickness | 0.8~1.6mm |
| 4. Appearance and Dimension | ||
| 4.1 | Appearance | Product surface without defect, dirt, crack, and mechanical damage. Contact without rust, plating not oxidized and not peeled. |
| 4.2 | Dimension | According to drawings |
| 4.3 | Exchangable | Exchangeable with same specification products. |
| 6. Electrical Performance | ||
| 6.1 | Rated Current | 2A (AC/DC) |
| 6.2 | Rated Voltage | 250V (AC/DC) |
| 6.3 | Contact Resistance | Initial value: 20m (Max. 20mV, 100mA applied to mate connector, excluding wire resistance) |
| 6.4 | Withstand Voltage | 1000V AC (rms) for 1 minute (adjacent terminals to ground), leakage current 0.5mA. No breakdown or flashover. |
| 6.5 | Insulation Resistance | 1000 M (500V DC for 1 minute between adjacent contacts) |
| 7. Mechanical Performance | ||
| 7.1 | Terminal crimping wire strength (Pullout force) | AWG#24: 30N AWG#26: 20N AWG#28: 13N AWG#30: 8N (Pullout rate: 25 3mm/min) |
| 7.2 | Fixed terminals and hole seat (Pullout force per contact) | 15N (Pullout rate: 25 3mm/min along wire direction) |
| 7.3 | Single contact insertion force | 6N (Insertion rate: 25 3mm/min) |
| 7.4 | Single contact withdrawal force | 0.5N (Withdrawal rate: 25 3mm/min) |
| 7.5 | Pin Retention force (Per contact) | 15N (Pullout rate: 25 3mm/min) |
| 7.6 | Durability | 30 cycles (Max. 10 cycles/min). Contact Resistance: 30 m. |
| 7.7 | Vibration | Frequency: 10-55-10 Hz/min, Amplitude: 1.5mm p-p, Duration: 2 hours per axis (X, Y, Z). Appearance: No damage. Contact Resistance: 30 m. Current Discontinuity: 1sec Max. |
| 8. Endurance Characteristics (Environmental Performance) | ||
| 8.1 | Thermal Aging | Temperature: 85 2, Period: 96 hours. Appearance: No damage. Contact Resistance: 30 m. |
| 8.2 | Temperature Rise | Max 30 (Measured at contact when maximum rated current is passed) |
| 8.3 | Humidity | Temperature: 40 2, RH: 90-95%, Period: 96 hours. Appearance: No damage. Contact Resistance: 30m. Insulation Resistance: 500M. No breakdown or flashover. |
| 8.4 | Temperature Cycling | 5 cycles: (-553, 30min) -> Room temp. (10-15min) -> (853, 30min) -> Room temp. (10-15min). Same requirements as 8.3. |
| 8.5 | Salt Spray | Temperature: 353, Solution: 51%. Period: 8 hours (Post-plating), 48 hours (Pre-plating). Appearance: No damage. Contact Resistance: 30 m. |
| 8.6 | Solderability | Solder Temperature: 2455, Immersion: 30.5S. Soldering Area: 90%. |
| 8.7 | Resistance to Soldering Heat | Manual Soldering: 30.5S at 3055. Wave Soldering: 50.5S at 2305. Reflow Soldering: Max 20S at 2555. Appearance: No damage. |
| 10. Caution | ||
| 10.1 | Moisture Absorption | Avoid exposure to temperatures > 30 and humidity > 60%RH after opening package. Use within 24 hours to prevent foaming/deformation during reflow/wave soldering. |
| 11. Packaging, Transportation, Storage | ||
| 11.1 | Packaging | Terminals: Reel packaging. Housings: Plastic bags. Headers: Reel, bag packaging. Includes certificate with product name, spec, quantity, date. Exterior: Carton with packing list. Product must not move within the box. |
| 11.2 | Transportation | Any method, avoid direct rain/sunlight, mechanical damage. Temperature: -20~+50. |
| 11.3 | Storage | Temperature: -10 to +40, RH 80%. Store in a warehouse free of acidic, alkaline, or corrosive gases. Re-qualification test required after 6 months of storage. |
2410121310_BOOMELE-Boom-Precision-Elec-HY-2P_C146058.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
