2 Point 8 AWG Wire to Board Connector BOOMELE Boom Precision Elec PHD 2 8AW with 2 Amp Rated Current
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 16 position 2mm Pitch Right Angle
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5mm
Reference Series:
PHD
Pins Structure:
2x8P
Contact Plating:
-
Contact Material:
-;PA
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
-
Supplementary Features:
-
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
8
Number Of Rows:
2
X-Length Of Bottom Edge On Board (Spacing Line):
-
Z-Height Of The Board:
9.5mm
Row Spacing:
2mm
Mounting Type:
弯插
Mfr. Part #:
PHD-2*8AW
Package:
Through Hole,Right Angle,P=2mm
Model Number:
PHD-2*8AW
Introduction
Product Overview
The PH-D SERIES is a 2.0mm pitch wire-to-board connector series designed for reliable electrical connections. This specification covers the terminal, housing, and wafer assembly components, suitable for applications requiring a rated voltage of 250V and operating temperatures between -25 to +85. The connectors are available in lead-free configurations and are designed for various wire gauges from AWG #24 to #32.
Product Attributes
- Brand: BOOMELE
- Series: PH-D SERIES
- Lead Free: Yes
Technical Specifications
| Item | Description | Specification |
|---|---|---|
| Scope | Connector Series | 2.0mm Pitch Wire to Board Connector |
| Product Name | Terminal | PH-D-PT (AWG #24-30) |
| Housing | PH-D-2*Y/HK | |
| Wafer Assembly (R/A) | PH-D-2*A | |
| Ratings | Rated Voltage (MAX.) | 250V |
| Maximum Insulation O.D. | 1.0mm | |
| Rated Current (MAX.) and Applicable wires | AWG. #24: 2.0 A; AWG. #32: 2.0 A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | Contact Resistance (mated) | < 20 milliohm MAX. |
| Insulation Resistance | > 100 Megohm MIN. (at 800V DC) | |
| Dielectric Strength | No Breakdown (at 800V AC for 1 minute) | |
| Contact Resistance on Crimped Portion | < 5 milliohm MAX. (at 20mV, 10mA) | |
| Mechanical Performance | Insertion and Withdrawal Force (Connector) | Refer to paragraph 7 |
| Crimping Strength | AWG. #24: 9.8 N (1.0kgf) MIN.; AWG. #32: 4.9 N (0.5kgf) MIN. | |
| Terminal Insertion Force (into housing) | 4.9 N (0.5kgf) MAX. | |
| Terminal/Housing Retention Force | 4.9 N (0.5kgf) MIN. | |
| Pin Retention Force | 4.9 N (0.5kgf) MIN. | |
| Environmental Performance | Mechanical Lifespan | 30 cycles (Contact Resistance: 40 milliohm MAX.) |
| Temperature Rise (at rated current) | 30 MAX. | |
| Vibration | No Damage, Contact Resistance: 40 milliohm MAX., Discontinuity: 1.0 microsecond MAX. | |
| Shock | No Damage, Contact Resistance: 40 milliohm MAX., Discontinuity: 1.0 microsecond MAX. | |
| Heat Resistance (96 hours at 85) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| Cold Resistance (96 hours at -40) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| Humidity (96 hours at 58-62, 90-95% RH) | No Damage, Contact Resistance: 40 milliohm MAX., Insulation Resistance: 10 Megohm MIN. | |
| Temperature Cycling (5 cycles: -55 to +105) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| Salt Spray (48 hours, 51% NaCl solution at 352) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| SO2 Gas (24 hours at 402, 505ppm SO2) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| NH3 Gas (40 minutes exposure) | No Damage, Contact Resistance: 40 milliohm MAX. | |
| Solderability | 95% of immersed area must show no voids, pin holes. | |
| Resistance To Soldering Heat | No Damage | |
| Reflow Condition | Peak Temp | 250 MAX. |
| Time above 230 | 30 SEC. MIN. | |
| Total time (150-200 Pre-heat) | 120 SEC. | |
| Insertion/Withdrawal Force (Unit: N) | Housing and Wafer - Insertion Force | 1-5.5 N |
| Housing and Wafer - Withdrawal Force | 6 N | |
| Housing and Terminal - Insertion Force | 0.25 N | |
| Housing and Terminal - Withdrawal Force | 15-15.2 N | |
| Hootype Housing and Terminal - Insertion Force | 0.25 N | |
| Hootype Housing and Terminal - Withdrawal Force | 15-15.2 N |
2410121246_BOOMELE-Boom-Precision-Elec-PHD-2-8AW_C71270.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
