0.5mm Pitch H2.0 FPC Easy On R A SMT Connectors Series Featuring Compact Design CAX CAX AFC01 04XCG H2.0
Manufacturer:
CAX
Description:
Hinged Lid -55℃~+85℃ 4P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-55℃~+85℃
Number Of Contacts:
4P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
铜合金
Mfr. Part #:
CAX-AFC01-04XCG-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-AFC01-04XCG-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable connectivity, these connectors feature a LCP housing and actuator, with phosphor bronze terminals and fitting nails. They are suitable for operating voltages up to 50V AC and current ratings up to 0.5A DC, with an operating temperature range of -55C to +85C.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Name: 0.5 Pitch H=2.0 FPC Easy-on R/A SMT type connectors series
- Housing Material: LCP (Flammability Rating: UL94V-0)
- Actuator Material: LCP (Flammability Rating: UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Housing Color: White
- Actuator Color: Black
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC Easy-on R/A SMT
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Rating | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Electrical Performance | ||
| Contact Resistance | 30 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes), passing DC 1mA. (EIA-364-28 Condition I) |
| Shock | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to 490m/s {50G} shock for 3 times in each of 6 directions along 3 axes, passing DC 1 mA. (EIA-364-27, test condition A) |
| Heat Resistance | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient. |
| Cold Resistance | Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient. |
| Humidity | Contact Resistance: 60m Max. Insulation Resistance: 30 M Min. Dielectric Strength: No Breakdown | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours, then condition at ambient. |
| Temperature Cycling | Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient. |
| Salt Spray | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then rinse and dry. |
| SO2 Gas | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas | Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. Appearance: No damage or abnormality. | Dip conductive terminals into molten solder (2455C) for 30.5 seconds. |
| Resistance to Soldering Heat (Iron) | Appearance: No damage or abnormality. | Soldering iron method: 0.2mm from terminal tip, 5 seconds Max. at 370~400C. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side):
Pre-Heat: 150C MAX. (60 sec)
Soak: 200C - 230C (60~90 sec)
Peak Temperature: 230C MIN. / 250C MAX. (30 sec)
Time at Peak Temp: 3 sec. or less
Usage Instructions
Step 1: Use the thumb or the forefinger, raise the top cover up.
Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
Step 4: Lift the top cover carefully, withdraw FPC.
Warnings
- The whirling angle cannot be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards should not exceed 0.04N/pin max.
- While opening the connector top cover, do not use excessive force and avoid touching the terminals.
2506051505_CAX-CAX-AFC01-04XCG-H2-0_C48677965.pdf
Related Products
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
0.5mm Pitch Right Angle SMT Connector Easy On Flip Cover CAX CAX AFC01 24XCB H2.0 for FPC Connection
Hinged Lid -55℃~+85℃ 24P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
| Image | Part # | Description | |
|---|---|---|---|
|
|
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing |
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options |
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0 |
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
0.5mm Pitch Right Angle SMT Connector Easy On Flip Cover CAX CAX AFC01 24XCB H2.0 for FPC Connection |
Hinged Lid -55℃~+85℃ 24P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems |
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
Send RFQ
Stock:
MOQ:
