Surface Mount 0.5mm Pitch H2.0 FPC Connector Right Angle SMT Type CAX CAX C01 22XCB H2.0 for Connection
Manufacturer:
CAX
Description:
-55℃~+85℃ Hinged Lid 22P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-55℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
22P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
CAX-C01-22XCB-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-C01-22XCB-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable connection with Flexible Printed Circuits (FPC), these connectors feature a right-angle surface mount design with a low profile (H=2.0mm). They are suitable for applications requiring a compact and secure FPC interface.
Product Attributes
- Brand: CHUANG DU ELECTRONICS
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (White)
- Actuator Material: LCP (Black)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Flammability Rating: UL94V-0
- Connector Type: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT
- Mounting Type: Surface Mount (SMT)
- Configuration: Right-Angle (R/A)
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity |
| Electrical Performance | ||
| Contact Resistance | 30 m Max. | Mate applicable FPC, test voltage 20mV, current 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, apply 500V DC between adjacent terminals or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminals or ground. (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | 0.30N Min. | Insert actuator, pull FPC at 253mm/min. (Pos.x) |
| Terminal Retention Force | 3N Min. | Apply axial pull out force on terminal assembled in housing at 253mm/min. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force on Fitting Nail assembled in housing at 253mm/min. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at <10 cycles/min. |
| Temperature Rise | 30C Max. | Measure temperature rise at contact point when maximum rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | Mate connectors, DC 1mA, 1.5mm displacement, 10~55~10 Hz for 2 hours in each X,Y,Z axis. (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | Mate FPC, DC 1mA, 490m/s {50G} for 3 times in each of 6 directions. (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 852C for 96 hours, then condition at room temp. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to -402C for 96 hours, then condition at room temp. |
| Humidity | Appearance: No Damage; Contact Resistance: 60m Max.; Dielectric Strength: No Breakdown; Insulation Resistance: 30 M Min. | Mate FPC, expose to 602C, 90-95% RH for 96 hours, then condition at room temp. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, subject to 5 cycles of -553C (30min) and +853C (30min), then condition at room temp. |
| Salt Spray | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 51% NaCl solution at 352C for 484 hours, then rinse and dry. |
| SO2 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. | Dip conductive terminals in molten solder (2455C) for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | Soldering iron method: 0.2mm from terminal tip, 5 seconds Max., 370~400C. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side)
| Stage | Temperature Range | Time |
|---|---|---|
| Pre-Heat | Start (150C MAX.) | (60sec) |
| 230C MIN. / 20~40sec | (60~90sec) | |
| Reflow | 250C MAX. (Peak Temp) | 3sec. or less |
(Graph visualization is not possible in text format, but the data points are represented above.)
Instructions upon usage of ZIF Easy-On Type
Step 1: Use the thumb or the forefinger, raise the top cover up.
Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
Step 4: Lift the top cover carefully, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards don't exceed 0.04N/pin max.
- While opening the connector and lifting and covering, don't use excessive strength and avoid touching the terminals.
2506041705_CAX-CAX-C01-22XCB-H2-0_C49023337.pdf
Related Products
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications |
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications |
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals |
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability |
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision |
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications |
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing |
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications |
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type |
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration |
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
