1.0mm Pitch FPC FFC SMT Connector Right Angle Type K CAX CAX-AFA07-07XCB-H2.5 ZIF Low Profile H2.5mm
Manufacturer:
CAX
Description:
FFC/FPC Connector 7 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
7P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
CAX-AFA07-07XCB-H2.5
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
CAX-AFA07-07XCB-H2.5
Introduction
Product Overview
This specification covers the 1.0mm Pitch H=2.5 FPC/FFC ZIF R/A Type K SMT Connectors series. Designed for reliable connections, these connectors feature a low profile (H=2.5mm) and a right-angle surface mount design with a K-type actuator for easy FPC/FFC insertion and retraction. They are suitable for applications requiring a 1.0mm pitch and a height of 2.5mm, offering robust electrical and mechanical performance.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Part Name: CAX-AFA07-**XCB-H2.5
- Housing Material: LCP (Natural Color, UL94V-0 Flammability Rating)
- Latch Material: LCP (Black Color, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Packaging: Tube (Small Batch), Reel (Bulk Order Recommended)
- Revision: A
Technical Specifications
| Category | Item | Test Condition | Specification |
|---|---|---|---|
| RATING | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | ||
| Operating Temperature range | -55C ~ +85C | ||
| Storage temperature range | -40C ~ +50C | ||
| ELECTRICAL PERFORMANCE | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV Max, 100mA. (EIA-364-23) | 40 m Max. |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | 500 M Min. | |
| Dielectric Strength | Mate applicable FPC/FFC ,apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) | No Breakdown | |
| MECHANICAL PERFORMANCE | FPC Retention Force | Insert the Latch, pull the FPC at a rate of 253mm per minute. (EIA-364-13) | Pos.x 0.40N Min. |
| Terminal Retention Force | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. (EIA-364-29) | 3.0N Min. | |
| Fitting Nail Retention Force | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. (EIA-364-29) | 1.0N Min. | |
| ENVIRONMENTAL PERFORMANCE | Durability | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. (EIA-364-09) | Contact Resistance: 60m Max. |
| Temperature Rise | Mate applicable FPC/FFC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 Method 2) | 30C Max. | |
| Vibration | Mate connectors and subject to the following vibration conditions, for period of 2 hours in each of 3 mutually perpendicular axes, passing DC 100mA during the test. Amplitude : 1.5mm P-P Frequency : 10~55~10 Hz in 1 minute. Duration : 2 hours in each of X,Y,Z axes. (EIA-364-28 Condition I) | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | |
| SHOCK | Shock | Mate applicable FPC/FFC and subject to the following shock conditions. 3 times of shocks shall be applied for each 6 directions along 3 mutually perpendicular axes, passing DC 100 mA current during the test. (Total of 18 shocks) Peak value : 490m/s {50G} (EIA-364-27, Test condition A) | Contact Resistance: 60m Max. Discontinuity: 1sec Max. |
| Heat Resistance | Mate applicable FPC/FFC and expose to 852C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-17) | Contact Resistance: 60m Max. | |
| Cold Resistance | Mate applicable FPC/FFC and expose to -402C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-59) | Contact Resistance: 60m Max. | |
| HUMIDITY | Humidity | Mate applicable FPC/FFC and expose to 40 2C, relative humidity 90 to 95% for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-31) | Contact Resistance: 60m Max. Dielectric Strength: No Breakdown. Insulation Resistance: 20 M Min. |
| Thermal Shock | Mate applicable FPC/FFC and subject to the following conditions for 5 cycles. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. 1 cycle a) -553C 30minutes b) +853C 30minutes (EIA-364-32) | Contact Resistance: 60m Max. | |
| Salt Spray | Mate applicable FPC/FFC and expose to the following salt mist conditions. Upon completion of the exposure period, salt deposits shall be removed by a gentle wash or dip in running water, after which the specified measurements shall be performed. NaCl solution Concentration : 5 1% Gold plating: 1~2u " Spray time : 24 4 hours Gold plating: 3u "and above Spray time : 48 4 hours Ambient temperature : 35 2C (EIA-364-26) | Contact Resistance: 60m Max. | |
| SOLDERABILITY | Solderability | Tip of solder tails and fitting nails into the molten solder (held at 2455C) up to 0.1mm from the bottom of the housing for 30.5 seconds. (EIA-364-52) | Solder Wetting: 95% of immersed area must show no voids, pin holes. |
| Resistance to Soldering Heat | Soldering iron method 0.2mm from terminal tip and fitting nail tip. Soldering time : 5 seconds Max. Solder temperature : 370~400C. (EIA-364-56) | Appearance: No Damage. | |
| INFRARED REFLOW CONDITION | Temperature Profile | (TEMPERATURE ON BOARD PATTERN SIDE) | 230C MIN./ 20~40sec, 250C MAX.(Peak Temp) 3sec. or less (Pre-Heat 150C MAX.) (60sec) (60~90sec) (30sec) |
2507091655_CAX-CAX-AFA07-07XCB-H2-5_C49274189.pdf
Related Products
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications |
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications |
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals |
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability |
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision |
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications |
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing |
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications |
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type |
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration |
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
