Electrical Bar Connector Solutions BOOMELE Boom Precision Elec GH1.25-5PLTPZ 1.25mm Pitch SMT Series
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
1x5P Tin 1.25mm 50V 5 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=1.25mm Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x5P
Contact Plating:
锡
Pitch:
1.25mm
Contact Material:
PA6T;磷青铜
Voltage Rating (Max):
50V
Number Of PINs Per Row:
5
Number Of Rows:
1
Mounting Type:
立贴
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
GH1.25-5PLTPZ
Package:
SMD,P=1.25mm
Model Number:
GH1.25-5PLTPZ
Introduction
Product Overview
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics.
Product Attributes
- Product Name: Bar Connectors
- Main Body Material: LCP
- Terminal Material: Copper (Surface plated with tin)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 1.0A [AC (virtual value) / DC] | |
| Ambient Temperature Range | -25 +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Insertion Force | 5 * n (N) MAX | Insert and extract applicable at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.3 * n (N) MIN | Insert and extract applicable at the speed rate of 253mm/minute. |
| Terminal Retention Force | 10 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Discontinuity) | 1 ms MAX. | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. DC 1mA energizing state. |
| Shock (Discontinuity) | 1 ms MAX. | 490m/s {50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energizing state. |
| Heat Resistance (Contact Resistance) | 60 m MAX | 852, 96 hour. |
| Cold Resistance (Contact Resistance) | 60 m MAX | -402, 96 hour. |
| Humidity (Insulation Resistance) | 100 M MIN | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours. |
| Temperature Cycling (Contact Resistance) | 60 m MAX | 5 cycles of: a) -553 30 minutes b) 852 30 minutes. |
| Salt Spray (Contact Resistance) | 60 m MAX | 484 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas (Contact Resistance) | 60 m MAX | 24 hours exposure to 505ppm. SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder ability (Solder Wetting) | 95% or more wetting area | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Appearance) | No damage, deformation | Soldering Time: 305 sec. Soldering Temperature: 2605. At least 5 times in a hot air oven. |
| Product Models | ||
| Part Number | ||
| GH1.25-2PWB | ||
| GH1.25-3PWB | ||
| GH1.25-4PWB | ||
| GH1.25-5PWB | ||
| GH1.25-6PWB | ||
| GH1.25-7PWB | ||
| GH1.25-8PWB | ||
| GH1.25-9PWB | ||
| GH1.25-10PWB | ||
| GH1.25-11PWB | ||
| GH1.25-12PWB | ||
| GH1.25-15PWB | ||
| GH1.25-NPWB | ||
| GH1.25-2PLT | ||
| GH1.25-3PLT | ||
| GH1.25-4PLT | ||
| GH1.25-5PLT | ||
| GH1.25-6PLT | ||
| GH1.25-7PLT | ||
| GH1.25-8PLT | ||
| GH1.25-9PLT | ||
| GH1.25-10PLT | ||
| GH1.25-12PLT | ||
| GH1.25-15PLT | ||
| GH1.25-NPLT | ||
2510291500_BOOMELE-Boom-Precision-Elec-GH1-25-5PLTPZ_C2829263.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
