electrical connectors BOOMELE Boom Precision Elec GH1.25-7PWBPZ 1.25mm Pitch Bar Connectors SMT series
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
1x7P Tin 1.25mm 50V 7 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=1.25mm,Surface Mount,Right Angle Headers, Male Pins RoHS
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x7P
Contact Plating:
锡
Pitch:
1.25mm
Contact Material:
PA6T;磷青铜
Voltage Rating (Max):
50V
Number Of PINs Per Row:
7
Number Of Rows:
1
Mounting Type:
卧贴
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
GH1.25-7PWBPZ
Package:
SMD,P=1.25mm,Surface Mount,Right Angle
Model Number:
GH1.25-7PWBPZ
Introduction
Product Overview
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics under various environmental conditions.
Product Attributes
- Main Body Material: LCP
- Terminal Material: Phosphor Copper
- Terminal Surface Treatment: Tin Plated
Technical Specifications
| Item | Model / Specification | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | 1.25mm Pitch Bar Connectors (SMT) | N/A |
| Part Number | GH1.25-2PWB, GH1.25-3PWB, GH1.25-4PWB, GH1.25-5PWB, GH1.25-6PWB, GH1.25-7PWB, GH1.25-8PWB, GH1.25-9PWB, GH1.25-10PWB, GH1.25-11PWB, GH1.25-12PWB, GH1.25-15PWB, GH1.25-NPWB, GH1.25-2PLT, GH1.25-3PLT, GH1.25-4PLT, GH1.25-5PLT, GH1.25-6PLT, GH1.25-7PLT, GH1.25-8PLT, GH1.25-9PLT, GH1.25-10PLT, GH1.25-12PLT, GH1.25-15PLT, GH1.25-NPLT | N/A |
| Ratings | ||
| Rated Voltage (MAX) | N/A | 50V |
| Rated Current (MAX) | [AC(virtual value)/DC] | 1.0A |
| Ambient Temperature Range | N/A | -25 +85 |
| Performance - Electrical | ||
| Contact Resistance | Mate applicable and measure by dry circuit, 20mV MAX, 10mA | 20 m MAX |
| Insulation Resistance | Mate applicable and apply 500V DC between adjacent terminal or ground | 500M MIN |
| Dielectric Strength | Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground | No Breakdown |
| Performance - Mechanical | ||
| Insertion and Withdrawal Force | Insert and extract applicable at the speed rate of 253mm/minute | Insertion: 5 * n (N) MAX Withdrawal: 0.3 * n (N) MIN |
| Terminal Retention Force | Pull the terminal at the speed rate of 253mm per minute | 10 N MIN |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX |
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes DC 1mA energized state | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA energized state | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | 852, 96 hours Mate applicable | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | -402, 96 hours Mate applicable | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours Mate applicable | Insulation Resistance: 100 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes Mate applicable | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352. Mate applicable | Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. Mate applicable | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution Mate applicable | Contact Resistance: 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% above |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2605 At least 5 times | Appearance: No Damage, Deformation |
Refer to drawing for Product Shape, Dimensions, and Materials.
2510291500_BOOMELE-Boom-Precision-Elec-GH1-25-7PWBPZ_C2829256.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
