bar connectors with rated voltage 50V and current 1A BOOMELE Boom Precision Elec 1.25T-4PWBPZ product
Manufacturer:
BOOMELE(Boom Precision Elec)
Description:
Connector Header 4 position 1.25mm Pitch Surface Mount, Right Angle
Category:
Free Hanging, Panel Mount/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.2mm
Reference Series:
PicoBlade(MX 1.25)
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
-
Supplementary Features:
-
Pitch:
1.25mm
Voltage Rating (Max):
200V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
10.15mm
Row Spacing:
-
Mounting Type:
卧贴
Z-Height Of The Board:
5.3mm
Mfr. Part #:
1.25T-4PWBPZ
Package:
SMD,P=1.25mm,Surface Mount,Right Angle
Model Number:
1.25T-4PWBPZ
Introduction
Product Overview
This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. Designed for reliable electrical connections, these connectors offer a rated voltage of 50V and a rated current of 1.0A (AC/DC). They are suitable for ambient temperatures ranging from -25 to +85 and have undergone rigorous testing for electrical, mechanical, and environmental performance to ensure durability and consistent operation.
Product Attributes
- Product Name: Bar Connectors
- Material: Main body - LCP, Terminal - Copper (surface plated with tin)
Technical Specifications
| Item | Requirement/Specification | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 1.0A [AC (virtual value) / DC] | |
| Ambient Temperature Range | -25 +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Insertion Force | 5 * n (N) MAX | Insert and extract applicable at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.3 * n (N) MIN | Insert and extract applicable at the speed rate of 253mm/minute. |
| Terminal Retention Force | 10 N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal (Contact Resistance) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise (at Rated Current) | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration (Discontinuity) | 1 ms MAX. | DC 1mA under mated condition; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes. |
| Shock (Discontinuity) | 1 ms MAX. | DC 1mA under mated condition; 490m/s {50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance (Contact Resistance) | 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Heat Resistance (Appearance) | No Damage | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Contact Resistance) | 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Appearance) | No Damage | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance (Dielectric Strength) | Must meet 4.1.3 | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity (Insulation Resistance) | 100 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Humidity (Appearance) | No Damage | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling (Contact Resistance) | 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Temperature Cycling (Appearance) | No Damage, Corrosion | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. |
| Salt Spray (Contact Resistance) | 60 m MAX | 484 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test and dry at room temperature. |
| SO2 Gas (Contact Resistance) | 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| SO2 Gas (Appearance) | No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas (Contact Resistance) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability (Solder Wetting) | 95% wetting area | Soldering Time: 20.5 sec. Soldering Temperature: 2355. Immersion depth: 0.2 mm from terminal tip. |
| Resistance to Soldering Heat (Appearance) | No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2605. Performed at least 5 times in a hot air oven. |
2504291727_BOOMELE-Boom-Precision-Elec-1-25T-4PWBPZ_C2829173.pdf
Related Products
BOOMELE Boom Precision Elec 1.25T 14AW 1.5mm thickness industrial component for technical application
Connector Header 14 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec HY-5P connector strip designed for consistent and electrical connections
Connector Header 5 position 2mm Pitch Surface Mount, Right Angle
BOOMELE Boom Precision Elec 1.25T-1-16A industrial component featuring 1.5mm thickness for technical
Connector Header 16 position 1.25mm Pitch
BOOMELE Boom Precision Elec 1.25T-1-13AW technical connector with accurate industrial specifications
Connector Header 13 position 1.25mm Pitch Right Angle
BOOMELE Boom Precision Elec XH-4A connector engineered for secure electrical connections in industry
Connector Header 4 position 2.5mm Pitch Through Hole
BOOMELE Boom Precision Elec 2510-5A electrical connectors terminal blocks and pin headers for wiring
Connector Header 5 position 2.54mm Pitch Right Angle
Electrical connector BOOMELE Boom Precision Elec 1.25T-13A featuring 1.5mm dimension for connectivity
Connector Header 13 position 1.25mm Pitch Through Hole
BOOMELE Boom Precision Elec PH 5AWD right angle and straight pin header connector housings for electrical
Connector Header 5 position 2mm Pitch Right Angle
wire to board connector BOOMELE Boom Precision Elec PHD-2 6AW with 2.0 millimeter pitch and lead free material
Connector Header 12 position 2mm Pitch Right Angle
Industrial electrical connector BOOMELE Boom Precision Elec 1.5-6A suitable for precise applications
Connector Header 6 position 1.5mm Pitch Through Hole
Send RFQ
Stock:
MOQ:
