Right Angle SMT Connector 0.5mm Pitch CAX CAX-AFC01-40XCB-H2.0 Easy-on FPC LCP Housing Material
Manufacturer:
CAX
Description:
Hinged Lid -55℃~+85℃ 40P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-55℃~+85℃
Number Of Contacts:
40P
Pitch:
0.5mm
Current Rating:
500mA
Voltage Rating (Max):
50V
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
锡
Contact Material:
铜合金
Mfr. Part #:
CAX-AFC01-40XCB-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-AFC01-40XCB-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature LCP housing and actuator materials with a UL94V-0 flammability rating. They are suitable for a wide operating temperature range of -55C to +85C and a maximum operating voltage of 50V AC with a current rating of 0.5A DC. The series is designed for ease of use with an 'Easy-on' mechanism for FPC insertion and removal.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
- Housing Material: LCP (Color: White, Flammability Rating: UL94V-0)
- Actuator Material: LCP (Color: Black, Flammability Rating: UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Mounting Type: SMT (Surface Mount Technology)
- Connector Type: Right Angle (R/A)
- FPC Type: Easy-on
- Origin: China
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Contact Resistance | 30 m Max. | Mate applicable FPC, test voltage 20mV, current 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, apply 500V DC between adjacent terminals or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC (rms) for 1 minute between adjacent terminals or ground. (EIA-364-20) |
| FPC Retention Force | 0.30N Min. | Insert actuator, pull FPC at 253mm/min. |
| Terminal Retention Force | 3N Min. | Axial pull out force on terminal assembled in housing at 253mm/min. |
| Fitting Nail Retention Force | 1.0N Min. | Axial pull out force on Fitting Nail assembled in housing at 253mm/min. |
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at <10 cycles/min. |
| Temperature Rise | 30C Max. | Measure temperature rise of contact point when max rated current passed through FPC. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | DC 1mA, 1.5mm displacement, 10~55~10 Hz for 2 hours in X,Y,Z axes. (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | DC 1mA, 490m/s {50G} for 3 times in 6 directions along 3 axes. (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Expose to 852C for 96 hours, then condition at ambient. |
| Cold Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Expose to -402C for 96 hours, then condition at ambient. |
| Humidity | Appearance: No Damage, Contact Resistance: 60m Max., Dielectric Strength: No Breakdown, Insulation Resistance: 30 M Min. | Expose to 602C, 90-95% RH for 96 hours, then condition at ambient. |
| Temperature Cycling | Appearance: No Damage, Contact Resistance: 60m Max. | 5 cycles of -553C (30min) and +853C (30min), then condition at ambient. |
| Salt Spray | Appearance: No Damage, Contact Resistance: 60m Max. | 51% NaCl solution, 352C for 484 hours, then rinse and dry. |
| SO2 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | 505 ppm SO2 gas, 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability (Wetting) | 75% of immersed area must show no voids, pin holes. | Immersion in molten solder at 2455C for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | Soldering time: 5 sec Max., Solder temperature: 370~400C. |
Infrared Reflow Condition
Temperature Profile:
Start (Pre-Heat 150C MAX.) -> (60~90sec) -> 230C MIN./ 2040sec -> (60sec) -> 250C MAX.(Peak Temp) 3sec. or less
(Temperature on Board Pattern Side)
(Instructions upon usage of ZIF Easy-on Type)
- Step 1: Use the thumb or the forefinger, raise the top cover up.
- Step 2: FPC metal finger facing down, insert parallel into the connector.
- Step 3: Press the top cover lightly and rotate down to lock in place, until FPC is fully inserted and not moved.
- Step 4: To withdraw FPC, lift the top cover carefully and then withdraw the FPC.
Warnings:
- The rotation angle should not exceed 120 degrees.
- Inserting FPC at an excessive angle may cause electrical discontinuity.
- The upward pulling force should not exceed 0.04N/pin max.
- When opening the connector's top cover, do not use excessive force to avoid touching the terminals.
2506051505_CAX-CAX-AFC01-40XCB-H2-0_C48677715.pdf
Related Products
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
0.5mm Pitch Right Angle SMT Connector Easy On Flip Cover CAX CAX AFC01 24XCB H2.0 for FPC Connection
Hinged Lid -55℃~+85℃ 24P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
| Image | Part # | Description | |
|---|---|---|---|
|
|
CAX CAX AFA07 10XCG H2.5 ZIF R A Type K SMT Connector with Black LCP Latch and Natural Color Housing |
Slide Lock -55℃~+85℃ 10P 1mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=1.0mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
0.5mm Pitch FPC ZIF R A SMT Connector CAX CAX AFC07 24SCB H2 0 with Tube and Reel Packaging Options |
Slide Lock -25℃~+85℃ 24P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0 |
Slide Lock -25℃~+85℃ 6P 0.5mm 400mA 50V Top Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
0.5mm Pitch Right Angle SMT Connector Easy On Flip Cover CAX CAX AFC01 24XCB H2.0 for FPC Connection |
Hinged Lid -55℃~+85℃ 24P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
|
|
|
Versatile CAX CAX-AFC01-14XCB-H2.0 connector compatible with various industrial control systems |
Hinged Lid -55℃~+85℃ 14P 0.5mm 500mA 50V Bottom Contact Surface Mount, Right Angle SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Assemblies RoHS
|
Send RFQ
Stock:
MOQ:
