FPC FFC ZIF Right Angle SMT Connector 1.0mm Pitch Durable CAX CAX AFA07 28XCB H2.5 with LCP Housing
Manufacturer:
CAX
Description:
FFC/FPC Connector 28 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
抽屉式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
28P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
CAX-AFA07-28XCB-H2.5
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
CAX-AFA07-28XCB-H2.5
Introduction
Product Overview
This product specification covers the 1.0mm Pitch H=2.5 FPC/FFC ZIF R/A Type K SMT Connectors series. Designed for reliable electrical connections, these connectors feature a low profile (H=2.5mm) and a right-angle (R/A) surface mount (SMT) design. They are suitable for applications requiring a 1.0mm pitch interface for Flexible Printed Circuits (FPC) and Flexible Flat Cables (FFC). The connectors are constructed with durable materials, including LCP housing and latches, and phosphor bronze terminals and fitting nails, ensuring performance within specified operating temperature and humidity ranges.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Series: CAX-AFA07-**XCB-H2.5
- Pitch: 1.0mm
- Height: 2.5mm
- Connector Type: FPC/FFC ZIF R/A Type K SMT Connector
- Housing Material: LCP
- Housing Color: Natural
- Housing Flammability Rating: UL94V-0
- Latch Material: LCP
- Latch Color: Black
- Latch Flammability Rating: UL94V-0
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Packaging Options: Tube (small batch), Reel (bulk order recommended)
Technical Specifications
| Item | Specifications | Test Condition | Requirement |
|---|---|---|---|
| Ratings | |||
| Operating Voltage (Max.) | 50V AC | ||
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | Relative humidity 90% max. | ||
| Storage Temperature Range | -40C ~ +50C | ||
| Storage Humidity Range | Relative humidity 90% max. | ||
| Electrical Performance | |||
| Contact Resistance | 40 m Max. | Mate applicable FPC/FFC and measure by dry circuit, 20mV Max, 100mA. (EIA-364-23) | |
| Insulation Resistance | 500 M Min. | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) | Visual appearance without any damage or abnormality |
| Mechanical Performance | |||
| FPC Retention Force | Pos.x 0.40N Min. | Insert the Latch, pull the FPC at a rate of 253mm per minute. (EIA-364-13) | |
| Terminal Retention Force | 3.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. (EIA-364-29) | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. (EIA-364-29) | |
| Environmental Performance and Others | |||
| Durability | 60m Max. (Contact Resistance) | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. (EIA-364-09) | |
| Temperature Rise | 30C Max. | Mate applicable FPC/FFC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 Method 2) | |
| Vibration | 60m Max. (Contact Resistance) 1sec Max. (Discontinuity) | Mate connectors and subject to vibration conditions: Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes, passing DC 100mA. (EIA-364-28 Condition I) | Visual appearance without any damage or abnormality |
| Shock | 60m Max. (Contact Resistance) 1sec Max. (Discontinuity) | Mate applicable FPC/FFC and subject to shock conditions: Peak value: 490m/s {50G}, 3 times for each of 6 directions along 3 axes, passing DC 100 mA. (EIA-364-27, Test condition A) | Visual appearance without any damage or abnormality |
| Heat Resistance | 60m Max. (Contact Resistance) | Mate applicable FPC/FFC and expose to 852C for 96 hours, then condition at ambient room for 1-2 hours. (EIA-364-17) | Visual appearance without any damage or abnormality |
| Cold Resistance | 60m Max. (Contact Resistance) | Mate applicable FPC/FFC and expose to -402C for 96 hours, then condition at ambient room for 1-2 hours. (EIA-364-59) | Visual appearance without any damage or abnormality |
| Humidity | 60m Max. (Contact Resistance) No Breakdown (Dielectric Strength) 20 M Min. (Insulation Resistance) | Mate applicable FPC/FFC and expose to 40 2C, 90-95% RH for 96 hours, then condition at ambient room for 1-2 hours. (EIA-364-31) | Visual appearance without any damage or abnormality |
| Thermal Shock | 60m Max. (Contact Resistance) | Mate applicable FPC/FFC and subject to 5 cycles: a) -553C for 30 min, b) +853C for 30 min. Condition at ambient room for 1-2 hours afterwards. (EIA-364-32) | Visual appearance without any damage or abnormality |
| Salt Spray | 60m Max. (Contact Resistance) | Mate applicable FPC/FFC and expose to salt mist (NaCl solution 51%) at 352C. Spray time: 244 hrs (1-2u gold plating), 484 hrs (3u+ gold plating). Rinse with clean water and dry. (EIA-364-26) | Visual appearance without any damage or abnormality |
| Solderability | 95% Min. (Solder Wetting) | Dip conductive terminals into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. (EIA-364-52) | 95% of immersed area must show no voids, pin holes. |
| Resistance to Soldering Heat | Visual appearance without any damage or abnormality | Soldering iron method: 0.2mm from terminal/fitting nail tip, 5 seconds Max. at 370~400C. (EIA-364-56) | |
INFRARED REFLOW CONDITION
Refer to paragraph 7 for Infrared Reflow Condition.
() (TEMPERATURE ON BOARD PATTERN SIDE)
| Time(seconds) | Temperature (C) |
|---|---|
| Start (Pre-Heat 150C MAX.) | ~60sec |
| ~60~90sec | ~200C |
| ~30sec | 230C MIN./ 2040sec |
| Peak Temp | 250C MAX. (3sec. or less) |
2507091655_CAX-CAX-AFA07-28XCB-H2-5_C49274201.pdf
Related Products
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications |
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications |
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals |
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability |
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision |
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications |
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing |
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications |
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type |
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration |
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
