FPC Easy-on Back-flip Right-Angle SMT Connector 0.5mm Pitch Featuring CAX CAX-AFC24-04XIB-H2.0 Model

Product Overview

This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip Right-Angle SMT type connectors series. Designed for reliable electronic connections, these connectors feature a robust construction with LCP housing and actuator, and phosphor bronze terminals and fitting nails. They are suitable for applications requiring a voltage rating of up to 50V AC and a current rating of 0.5A DC, operating within a temperature range of -55C to +85C. The easy-on, back-flip design facilitates simple and secure FPC insertion and removal.

Product Attributes

• Brand: DAET
• Manufacturer: (ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD)
• Model Series: CAX-AFC24-**XIB-H2.0
• Pitch: 0.5mm
• Height: 2.0mm
• Type: FPC Easy-on Back-flip Right-Angle SMT Connector
• Housing Material: LCP (Liquid Crystal Polymer)
• Housing Color: White
• Actuator Material: LCP
• Actuator Color: Black
• Terminal Material: Phosphor Bronze
• Fitting Nail Material: Phosphor Bronze
• Flammability Rating: UL94V-0

Technical Specifications

Usage Instructions

Operation of ZIF Back-flip Type:

1. Step 1: Insert the FPC with the actuator opened.
2. Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to secure.
3. Step 3: Lift the actuator, withdraw FPC.

Warnings:

• The rotation angle cannot be greater than 90 degrees.
• The pressure applied should be average and on the center of the actuator.
• Lift the actuator at the center.
• PCB board flatness must be within 0.1mm max.

Material Safety Data Sheet (MSDS) - LCP E6808

1. Chemical Name: LCP E6808 (Liquid Crystal Polymer)

2. Substance Identity and Company Contact Information:

• Material Name: LCP Plastic Granules
• Material Specification: LCP E6808
• Manufacturer: A (Shenzhen)

3. Chemical Composition:

• Raw Material: 65%
• Glass Fiber Content: 35%

4. Hazards Identification: No health, environmental, or physical/chemical hazards identified.

5. First Aid Measures:

• Inhalation: Move to fresh air, seek medical attention.
• Skin Contact: Wash with water. For molten plastic, wash with soap and water, seek medical attention.
• Eye Contact: Rinse with plenty of water for at least 15 minutes. Seek medical attention if discomfort persists.
• Ingestion: Induce vomiting, rinse mouth with water, seek medical attention.

6. Fire-fighting Measures:

• Suitable Extinguishing Media: Water, foam, dry powder.
• Special Fire Fighting Procedures: Remove combustibles.
• Protective Equipment: Self-contained breathing apparatus.

7. Accidental Release Measures: Avoid slipping hazard from granules. Recover or dispose of waste.

8. Handling and Storage: Keep away from fire. Store in a cool, dry place, avoid direct sunlight and rain.

9. Exposure Controls and Personal Protection:

• Ventilation: Use to remove dust, smoke, and gas.
• Personal Protective Equipment: Respirator, leather gloves, safety glasses/goggles.

10. Physical and Chemical Properties:

• Physical State: Granular
• Odor: None
• Boiling Point: 305C
• Density: 1.67

11. Stability and Reactivity: Stable under normal conditions. Decomposition products: CO, NO.

12. Toxicological Information: LD50 (oral, rat) >5000mg/kg. Mild eye and skin irritant.

13. Ecological Information: Prevent ingestion by marine life or birds.

14. Disposal Considerations: Incinerate or landfill according to local regulations.

15. Transport Information: Unclassified.

16. Regulatory Information: None.

Material Safety Data Sheet (MSDS) - Mist Tin Solution

1. Chemical Identification: Mist Tin Solution

2. Manufacturer/Supplier: (Yuanfang Electronics Plating Co., Ltd.)

3. Main Components: Organic acid, tin, mist tin additives (50-60%)

4. Health Hazards: Irritating to eyes and skin. Inhalation may cause breathing difficulties.

5. First Aid Measures:

• Skin Contact: Wash with soap and water, remove contaminated clothing, seek medical attention.
• Inhalation: Move to fresh air, seek medical attention.
• Eye Contact: Rinse immediately with plenty of water, seek medical attention.
• Ingestion: Drink plenty of water, induce vomiting, seek medical attention.

6. Fire and Explosion Hazards: Non-flammable. May produce toxic vapors when heated.

7. Accidental Release Measures: Avoid spillage. Ensure good ventilation. Treat wastewater.

8. Handling and Storage: Avoid contact, ingestion, inhalation. Store in a cool, dry, ventilated place. Temperature: 255C, Humidity: 80%.

9. Exposure Controls and Personal Protection: Wear personal protective equipment (respirator, chemical safety goggles, protective clothing, acid-alkali resistant gloves).

10. Physical and Chemical Properties: Colorless liquid. Boiling Point: 100C. pH: 0.5-1.8.

11. Stability and Reactivity: Stable. Avoid contact with strong alkaline materials. Combustion products: carbon oxides.

12. Toxicological Information: No specific LC50 or STEL data provided.

13. Environmental Ecological Information: No data provided.

14. Transport Information: UN Number: 200 NA.

15. Applicable Regulations: Complies with relevant safety regulations.

16. Other Information: References to MSDS from Aldrich, Sigma, RDH, Fluka, Mallinckrodt Baker.