Back Flip Actuator FPC Connector 0.5mm Pitch CAX CAX-AFC24-32XIB-H2.0 with UL94V-0 Housing Material
Manufacturer:
CAX
Description:
FFC/FPC Connector 32 Position 0.5mm Pitch Double-Sided Contacts, Top and Bottom Entry Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
32P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
CAX-AFC24-32XIB-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-AFC24-32XIB-H2.0
Introduction
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature a back-flip actuator for easy FPC insertion and removal. They are suitable for applications requiring a 0.5mm pitch and a height of 2.0mm, with a rated voltage of 50V AC and a current rating of 0.5A DC. The operating temperature range is -55C to +85C.
Product Attributes
- Brand: DAET
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (Liquid Crystal Polymer), White, UL94V-0 Flammability Rating
- Actuator Material: LCP, Black, UL94V-0 Flammability Rating
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
Technical Specifications
| Item | Specifications | Test Condition | Requirement |
|---|---|---|---|
| Rating | |||
| Operating Voltage (Max.) | 50V AC | ||
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | Relative humidity 90% max. | ||
| Storage Temperature Range | -10C ~ +50C | ||
| Storage Humidity Range | Relative humidity 90% max. | ||
| Electrical Performance | |||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) | |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) | |
| Mechanical Performance | |||
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. | |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. | |
| Environmental Performance and Others | |||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) | |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (1.5mm P-P, 10~55~10 Hz in 1 minute, 2 hours in each X,Y,Z axes, passing DC 1mA). (EIA-364-28 Condition I) | |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to shock conditions (490m/s {50G} for 3 times in each of 6 directions, passing DC 1mA). (EIA-364-27, test condition A) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient for 1-2 hours. | |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at ambient for 1-2 hours. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient for 1-2 hours. | |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then wash with clean water and dry. | |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pinholes. Resistance to Soldering Heat: Meets soldering conditions (soldering iron method). Appearance: No Damage | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. Soldering iron method: 0.2mm from terminal tip and fitting nail tip, 5 seconds Max, 370~400C. | |
Infrared Reflow Condition
Temperature on Board Pattern Side:
Pre-Heat: Max 150C (60 sec)
Soak: 20~40 sec at 230C MIN.
Peak Temp: 250C MAX. (3 sec. or less)
Time above 230C: 60~90 sec
Instructions for Use of ZIF Back-flip Type
- Insert the FPC with the actuator opened.
- FPC is totally inserted and not moved. Press the actuator and rotate down to make a reservation.
- Lift the actuator, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 90 degrees.
- The strength of exerting pressure should be average and pushing actuator at the center.
- To lift actuator at the center.
- The roughness of PCB board must be in 0.1mm max.
2507091655_CAX-CAX-AFC24-32XIB-H2-0_C49274066.pdf
Related Products
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications |
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications |
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals |
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability |
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision |
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications |
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing |
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications |
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type |
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration |
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
