Compact SMT Connector 0.5mm Pitch CAX CAX-AFC01-54XCB-H2.0 Featuring White LCP Housing and Black Actuator
Manufacturer:
CAX
Description:
FFC/FPC Connector 54 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-25℃~+85℃
Number Of Contacts:
54P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
CAX-AFC01-54XCB-H2.0
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
CAX-AFC01-54XCB-H2.0
Introduction
Product Overview
This product is a 0.5mm Pitch H=2.0 FPC Easy-on Right-Angle SMT type connector series. Designed for reliable connections, it features a LCP housing and actuator, with phosphor bronze terminals and fitting nails. The connector operates within a voltage of 50V AC and a current rating of 0.5A DC, with an operating temperature range of -55C to +85C. It is suitable for applications requiring a compact and robust connection solution.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (Flammability Rating: UL94V-0)
- Actuator Material: LCP (Flammability Rating: UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Housing Color: White
- Actuator Color: Black
Technical Specifications
| Category | Item | Specifications | Test Condition |
|---|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Includes terminal temperature rise. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. | |
| Storage Temperature Range | -10C ~ +50C | ||
| Electrical Performance | Contact Resistance | 30 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) | |
| Mechanical Performance | FPC Retention Force | 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. | |
| Environmental Performance and Others | Durability (Contact Resistance) | 60 m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) | |
| Vibration (Contact Resistance) | 60 m Max. | Mate connectors and subject to vibration (1.5mm P-P, 10~55~10 Hz, 2 hours in each of X,Y,Z axes, DC 1mA). (EIA-364-28 Condition I) | |
| Vibration (Discontinuity) | 1 sec Max. | Mate connectors and subject to vibration (1.5mm P-P, 10~55~10 Hz, 2 hours in each of X,Y,Z axes, DC 1mA). (EIA-364-28 Condition I) | |
| Shock (Contact Resistance) | 60 m Max. | Mate applicable FPC and subject to 3 shocks of 490m/s {50G} in 6 directions along 3 axes, DC 1mA. (EIA-364-27, test condition A) | |
| Shock (Discontinuity) | 1 sec Max. | Mate applicable FPC and subject to 3 shocks of 490m/s {50G} in 6 directions along 3 axes, DC 1mA. (EIA-364-27, test condition A) | |
| Heat Resistance (Contact Resistance) | 60 m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at room temperature. | |
| Cold Resistance (Contact Resistance) | 60 m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at room temperature. | |
| Humidity (Contact Resistance) | 60 m Max. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at room temperature. | |
| Humidity (Insulation Resistance) | 30 M Min. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at room temperature. | |
| Humidity (Dielectric Strength) | No Breakdown | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at room temperature. | |
| Temperature Cycling (Contact Resistance) | 60 m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) / +853C (30 min), then condition at room temperature. | |
| Salt Spray (Contact Resistance) | 60 m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then wash and dry. | |
| SO2 Gas (Contact Resistance) | 60 m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. | |
| NH3 Gas (Contact Resistance) | 60 m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Soldering | Solderability (Wetting) | 75% of immersed area must show no voids, pin holes. | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering iron method) | No Damage | 0.2mm from terminal tip and fitting nail tip. Soldering time: 5 seconds Max. Solder temperature: 370~400C. |
Infrared Reflow Condition
Temperature on Board Pattern Side:
| Stage | Temperature (C) | Time (seconds) |
|---|---|---|
| Start (Pre-Heat) | Max. 150C | ~60 |
| Soak | Min. 200C | 60~90 |
| Reflow | 230C MIN. / 20~40 sec | ~30 |
| Peak Temp. | Max. 250C | 3 sec. or less |
Instructions for Use (Easy-on Type)
- Step 1: Use the thumb or forefinger to lift the top cover upwards.
- Step 2: Insert the FPC with the conductive side facing down, parallel to the connector.
- Step 3: Press the top cover lightly and rotate it down until it locks into place, ensuring the FPC is fully inserted and stable.
- Step 4: To withdraw the FPC, carefully lift the top cover and then remove the FPC.
Warnings:
- The rotation angle of the cover should not exceed 120 degrees.
- Inserting the FPC at an excessive angle may cause electrical discontinuity.
- The upward pulling force should not exceed 0.04N/pin max.
- Avoid using excessive force when opening the connector's top cover to prevent contact with the terminals.
2507091655_CAX-CAX-AFC01-54XCB-H2-0_C49272725.pdf
Related Products
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
electronic component CAX CAX-AFC11-04ICB-H4.4 designed for precise industrial applications |
FFC/FPC Connector 4 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC Easyon Right Angle SMT Connector CAX CAX-A01-10XCB-H2.0 for Electronic Applications |
-55℃~+85℃ Hinged Lid 10P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals |
FFC/FPC Connector 34 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Electronic connector CAX CAX-AFC11-14ICB-H4.4 designed for industrial applications and reliability |
FFC/FPC Connector 14 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
Robust and CAX CAX-AFC11-30ICB-H4.4 electronic part suitable for technical projects requiring precision |
FFC/FPC Connector 30 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
|
|
|
1.0mm Pitch FPC FFC ZIF R A Type K SMT Connectors CAX CAX AFA07 14SCB H2.5 for Electronic Applications |
FFC/FPC Connector 14 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
CAX CAX A07 15SCB H2.5 compact 1.0mm pitch H2.5 FPC FFC ZIF R A type K SMT connectors with LCP housing |
Slide Lock -55℃~+85℃ 15P Top Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
|
|
|
|
CAX CAX AFC01 13XCB H2 0 0.5mm Pitch H 2.0 FPC Easy On R A SMT Connectors for Low Voltage Applications |
FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
2.0mm Height FPC ZIF SMT Connector with 0.5mm Pitch CAX CAX-AFC07-10SCB-H2.0 Right Angle Upper Type |
FFC/FPC Connector 10 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃
|
|
|
|
Durable industrial connector CAX CAX-AFC11-26ICB-H4.4 suitable for electronic system integration |
FFC/FPC Connector 26 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
