Double Row 2.50mm Pitch Electrical Connector Strip HCTL HC XH 4Y L 05 for Industrial Applications
Manufacturer:
HCTL
Description:
Connector Housing 4 Position 2.5mm Pitch Single Row XH Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2.5mm
Colour:
蓝色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
XH
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-XH-4Y-L-05
Package:
P=2.5mm
Model Number:
HC-XH-4Y-L-05
Introduction
Product Overview
This specification covers the 2.50 series of strip connectors, detailing product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for various applications requiring a 2.50mm pitch, double-row configuration.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Nylon66 material)
- Color: White (for housing)
Technical Specifications
| Item | Requirement | Test Mode |
| 1. Scope | ||
| The contents of specifications for 2.50 series connector strip including product performance, test methods and inspection requirements. | ||
| 2. Applicable Standards | ||
| GB/T2421 | Electrical Connectors Environmental Testing - Part 1: General Principles | |
| GB/T2423 | Electrical Connectors Environmental Testing Methods | |
| GB/T2424 | Electrical Connectors Environmental Testing Guidelines | |
| GB/T5095 | Basic Test Rules and Measuring Methods for Electromechanical Components of Electronic Equipment | |
| 3. Use Condition | ||
| Ambient Temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Housing Plastic Wafer-A | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AW | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer-AWD | Nylon66 UL94V-O, Color: White | |
| Contact Pin | Brass, Thickness 0.64mm, Tin plating: 2.55 m | |
| Contact Pin | Phosphor bronze, Thickness 0.2mm, Tin plating: 24 m | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand Voltage | No breakdown or flashover | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 5.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 1.5N | Terminal and hole seat combination, pulled out from the hole seat at a rate of 253mm per minute along the wire direction. |
| Terminal crimping Wire strength | 10N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Pin Retention Force | 20N (AWG#22 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Pin Retention Force | 13N (AWG#28 wire) | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity Max 1 sec, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity | Contact Resistance 40m, Insulation Resistance 1000 M, Appearance: No damage | Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle consists of -553C 30min, 853C 30min, room temp 10-15min transition time. Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Concentration: 51%, Period: 24H |
| Solder ability | Soldering area: 90 % | Soldering temperature: 2455C, Immersion period: 3 0.5S |
| Manual Soldering | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505 |
| Wave Soldering | Appearance: No damage | Soldering time: 50.5S, Soldering pot: 260 5 C |
2401091400_HCTL-HC-XH-4Y-L-05_C20417882.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
