Electrical Strip Connector 3.81mm Pitch Double Row HCTL HC-3810-2*8EY-05 with Brass Contact Material
Manufacturer:
HCTL
Description:
Connector Housing 16 Position 3.81mm Pitch Dual Row PBT -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
UL94V-0
Pitch:
3.81mm
Colour:
黑色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PBT
Number Of PINs Per Row:
8
Number Of Positions Or Pins:
2x8P
With Locker:
不带锁扣
Row Spacing:
5.08mm
Mfr. Part #:
HC-3810-2*8EY-05
Package:
P=3.81mm
Model Number:
HC-3810-2*8EY-05
Introduction
3.81MM PITCH 3810 CONNECTOR DOUBLE ROW TYPE
This specification covers the 3.81 series strip connectors, including product performance, test methods, and inspection requirements. These connectors are designed for electrical applications requiring reliable connections.
Product Attributes
- Brand: HCTLDZ
- Origin: Shenzhen, China
- Material: Brass (Contact), PBT UL94V-O (Housing)
- Color: Black (Housing)
- Certifications: ROHS
Technical Specifications
| Item | Requirement | Test Method |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. USE CONDITION | ||
| Ambient temperature Range | -25 85 | |
| Applicable Wire Sizes | AWG #1424 | |
| Applicable PC board thickness | 1.6mm | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 15A AC/DC | |
| Insulation Resistance | 1000 M (Initial value 10m) | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| Withstand voltage | No breakdown or flashover | Apply 1500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. |
| Contact Resistance | 10m (Initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | 130N (AWG #14), 220N (AWG #16) | Axial pullout force at 25 3mm/min. |
| Fixed terminals And hole seat | 30N | |
| Single contact insertion force | 5N | |
| Single contact Withdrawal force | 0.3N | |
| Seat pull-out force | 12N | Exerts a force on the pin end at 253mm/min until the needle exits the seat. |
| Pin Retention Force | 90N (AWG #14), 70N (AWG #16), 50N (AWG #18), 30N (AWG #20), 30N (AWG #22), 30N (AWG #24) | Per contact. |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles/min prior to environmental test. |
| Vibration | Current Discontinuity 1 sec; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Period: 2 hours for each direction (X, Y, Z axis). |
| 8. Environmental Performance | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously. |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed. | |
| Constant Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95%; Period: 96 hours continuously. |
| Temperature Cycling | Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle: -553 (30min) -> Room temp (10-15min) -> 853 (30min) -> Room temp (10-15min). Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Concentration: 51%; Period: Stamping after tin plated for 8 hours or Stamping before tin plated for 48 hours. |
| Solder ability | Soldering area: 90% | Solder temperature: 2455; Immersion period: 3 0.5S. |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: 2605 for 50.5S. Manual soldering: 3505. |
2308221550_HCTL-HC-3810-2-8EY-05_C7543182.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
