Home > Products > Arrays, Edge Type, Mezzanine (Board to Board) >Rectangular Connector Housings > Electrical connector strip HCTL HC-JWPF-2x3Y-05 with white PBT UL94V-O housing and phosphor bronze contacts

Electrical connector strip HCTL HC-JWPF-2x3Y-05 with white PBT UL94V-O housing and phosphor bronze contacts

Manufacturer:
HCTL
Description:
Connector Housing 6 Position 2mm Pitch Dual Row JWPF Series PBT -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
JWPF
Operating Temperature:
-25℃~+85℃
Plastic Material:
PBT
Number Of PINs Per Row:
3
Number Of Positions Or Pins:
2x3P
With Locker:
带锁扣
Row Spacing:
4mm
Mfr. Part #:
HC-JWPF-2x3Y-05
Package:
P=2mm
Model Number:
HC-JWPF-2x3Y-05
Introduction

Product Overview

This specification covers the 2.00 series JWPF connector strip, detailing its performance, test methods, and inspection requirements. Designed for electrical connections, it is suitable for various applications requiring reliable interconnections.

Product Attributes

  • Brand: HCTLDZ
  • Origin: Shenzhen, China
  • Material: Phosphor bronze (Contact), PBT UL94V-O(2) (Housing)
  • Color: White (Housing)
  • Certifications: ROHS

Technical Specifications

ItemRequirementTest Mode
Electrical PerformanceRated Voltage: 100V AC/DC
Rated Current: 3A AC/DC
Withstand Voltage: 1000V AC (rms) for 1 minute, leakage current 0.5mAApply 1000V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors
Insulation Resistance: 1000 MApply 500V DC(rms) for I minute between adjacent contacts to measure the insulation resistance
Mechanical PerformanceSingle contact insertion force: 5NHousing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test
Single contact Withdrawal force: 0.5NThe terminal and the hole seat at a react per minute to 253mm along the write direction, are pulled out from the hole in the seat capacity
Terminal crimping Wire strength: 15N (AWG#22), 20N (AWG#24), 30N (AWG#26)Axial per minute to 25 3mm rate of the pullout force
Pin Retention Force: 15NExerts a force on the pin end at a rate per Minute 253mm until the needle exit Seat pull-out force
Vibration: Current Discontinuity 1 sec, Contact Resistance 40mAmplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Period: 2 hours for each direction (X, Y, Z axis)
Environmental PerformanceThermal Aging: Contact Resistance 40mTemperature: 852, Period: 96 hours continuously
Constant Humidity: Contact Resistance 40m, Insulation Resistance 1000mTemperature: 402 C, Relative humidity: 90-95% (RH), Period: 96 hours continuously
Temperature Cycling: No breakdown or flashoverOne cycle: -553C 30min, 853C 30min, room temp 10-15min transition. Total cycle: 5 cycles
Salt Spray: Contact Resistance 40mSolution: 51% NaCl, Temperature: 353 C. Stamping before tin plated for 48 hours or tin plated before stamping for 8 hours.

2403071456_HCTL-HC-JWPF-2x3Y-05_C7543259.pdf

Send RFQ
Stock:
MOQ: