Durable 2.50MM Pitch Double Row Connector Strip HCTL HC XHB 3Y 05 Electrical Performance Tested
Manufacturer:
HCTL
Description:
Connector Housing 3 Position 2.5mm Pitch Single Row XHB Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2.5mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
XHB
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
3
Number Of Positions Or Pins:
1x3P
With Locker:
带锁扣
Row Spacing:
-
Mfr. Part #:
HC-XHB-3Y-05
Package:
P=2.5mm
Model Number:
HC-XHB-3Y-05
Introduction
Product Overview
This specification covers the 2.50MM PITCH XHB CONNECTOR DOUBLE ROW TYPE, designed for electrical connections. It details product performance, test methods, and inspection requirements, ensuring interchangeability with same specification products.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Material: Brass, LCP, Nylon66, Phosphor bronze
- Color: White, Nature (Natural)
- Certifications: UL94V-0
Technical Specifications
| Item | Requirement | Test Mode | |||||
| 1. Scope | |||||||
| General Principles | This specification content is applicable to the 2.50 series connector strip, including product performance, test methods and test requirements. | ||||||
| 2. Applicable Standards | |||||||
| GB/T2421 | Electrical electronic product environmental test - Part 1: General principles | ||||||
| GB/T2423 | Electrical electronic product environmental test methods | ||||||
| GB/T2424 | Electrical electronic product environmental test guidance | ||||||
| GB/T5095 | Basic test rules and measurement methods for electromechanical components of electrical equipment | ||||||
| 3. Use Condition | |||||||
| Ambient Temperature | -40 +105 | ||||||
| Applicable Wire Sizes | AWG #2228 | ||||||
| Applicable PC board thickness | 1.6mm | ||||||
| 4. Appearance and Dimension | |||||||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, peeling, etc. | ||||||
| Dimension | According to drawings | ||||||
| Interchangeability | Exchangeable with same specification products. | ||||||
| 5. Material | |||||||
| Part No. | Type | Explain | Material | Thickness | Plating | UL Rating | Color |
| Terminal Contact | Brass | 0.64mm | Tin plating: 2.55 m | White | |||
| Housing Plastic | LCP | UL94V-0 | White | ||||
| Housing Plastic | Nylon66 | UL94V-0 | White | ||||
| Contact Plug Pin | Brass | 0.64mm | Tin plating: 2.55 m | Nature | |||
| Contact Plug Pin | Brass | 0.64mm | Tin plating: 2.55 m | White | |||
| Contact Plug Pin | Brass | 0.64mm | Tin plating: 2.55 m | White | |||
| Contact Plug Pin | Phosphor bronze | 0.2mm | Tin plating: 24 m | White | |||
| Housing Plastic Wafer | Nylon66 | UL94V-O | White | ||||
| 6. Electrical Performance | |||||||
| Rated Voltage | 250V AC/DC | ||||||
| Rated Current | 3A AC/DC | ||||||
| Withstand Voltage | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminals and ground of the mate connectors. No breakdown or flashover. | ||||||
| Contact Resistance | Initial value 20m. Does not include wire resistance. A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector. | ||||||
| Insulation Resistance | More than 1000 M. Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. | ||||||
| 7. Mechanical Performance | |||||||
| Terminal crimping wire strength | AWG#22: 50N; AWG#24: 30N; AWG#26: 20N; AWG#28: 13N | Axial pullout force per contact at a rate of 25 3mm per minute. | |||||
| Fixed terminals and hole seat | 10N | ||||||
| Single contact insertion force | 5.5N | Housing together with terminal ends with wafer matched at a rate of 25 3mm per minute. | |||||
| Single contact Withdrawal force | 1.5N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity. | |||||
| Seat pull-out force | 20N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit seat. | |||||
| Pin Retention Force | |||||||
| Durability | Contact Resistance 40m; Appearance: No damage; Max Current Discontinuity 1 sec. | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. | |||||
| Vibration | Appearance: No damage; Contact Resistance 40m. | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Period: 2 hours for each direction (X, Y, Z axis). | |||||
| 8. Environmental Performance | |||||||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m. | Temperature: 852; Period: 96 hours continuously. | |||||
| Temperature Rise | Measure the temperature rise of contact when the maximum rated current is passed. | ||||||
| Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m. | Relative humidity: 90-95% (RH); Period: 96 hours continuously. Temperature: 30 Max. | |||||
| Temperature Cycling | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m; Withstand Voltage: No breakdown or flashover. | One cycle: -553C for 30min, room temp 10-15min. Total cycle: 5 cycles. 853C for 30min, room temp 10-15min. | |||||
| Salt Spray | Appearance: No damage; Contact Resistance 40m. | Temperature: 353; Concentration: 51%; Period: 24H. | |||||
| Solder Ability | Soldering area: 90%. | Solder temperature: 2455C; Immersion period: 3 0.5S. | |||||
| Resistance to Soldering Heat | Soldering time: 50.5S; Soldering pot: 260 5C. Position: DIP type 1.5mm from conductor/fixed piece end; SMT type 0.05mm from conductor/fixed piece end. | ||||||
2401091205_HCTL-HC-XHB-3Y-05_C20417832.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
