Electrical Connector HCTL HC-HY-4Y-B-05 2.00 Series with Product Performance and Inspection Standards
Manufacturer:
HCTL
Description:
Connector Housing 4 Position 2mm Pitch Single Row HY Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
黑色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
HY
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
带锁扣
Row Spacing:
-
Mfr. Part #:
HC-HY-4Y-B-05
Package:
P=2mm
Model Number:
HC-HY-4Y-B-05
Introduction
Product Overview
This specification covers the 2.00 series of HY connectors, designed for various applications. It details product performance, testing methods, and inspection requirements, ensuring reliable electrical and mechanical functionality.
Product Attributes
- Brand: HCTLDZ
- Origin: Shenzhen, China
- Certifications: UL94V-O
Technical Specifications
| Item | Specification | Test Mode |
| Scope | 2.00 series connector strip, including product performance, test methods, and inspection requirements. | |
| Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 | |
| Use Condition - Ambient Temperature Range | -25 +85 | |
| Use Condition - Applicable Wire Sizes | AWG #2228 | |
| Use Condition - Applicable PC board thickness | 0.8l.6mm | |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| Material - Terminal Contact | Brass, 0.50mm thick, Tin plating: 2.55 m | |
| Material - Housing Plastic | Nylon66 UL94V-O, Color: White | |
| Material - Plastic Wafer (Straight Pin Header) | LCP UL94V-O, Color: Nature, Brass, 0.50mm thick, Tin plating: 2.55 m | |
| Material - Plastic Wafer (Right Angle Pin Header) | Nylon66 UL94V-O, Color: White, Phosphor bronze, 0.25mm thick, Tin plating: 35 m | |
| Material - Plastic Wafer (Vertical Surface Mount) | LCP UL94V-O, Color: Nature, Brass, 0.60mm thick, Tin plating: 35 m | |
| Material - Plastic Wafer (Horizontal Surface Mount) | Nylon66 UL94V-O, Color: White, Brass, 0.40mm thick, Tin plating: 2.55 m | |
| Electrical Performance - Rated Voltage | 250V AC DC | |
| Electrical Performance - Rated Current | 3A AC DC | |
| Electrical Performance - Withstand Voltage | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. | Apply 1000V AC(rms) for 1 minute between adjacent contacts. |
| Electrical Performance - Contact Resistance | Initial value 20m. Does not include wire resistance. | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. |
| Electrical Performance - Insulation Resistance | More than 1000 M. | Apply 500V DC (rms) for 1 minute between adjacent contacts. |
| Mechanical Performance - Single Contact Insertion Force | Less than 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Mechanical Performance - Single Contact Withdrawal Force | More than 1N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity. |
| Mechanical Performance - Terminal crimping Wire strength | AWG#22: 15N, AWG#24: 13N, AWG#26: 10N, AWG#28: 8N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit. |
| Mechanical Performance - Pin Retention Force | 15N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Mechanical Performance - Seat pull-out force | 50N (AWG#22), 30N (AWG#24), 20N (AWG#26), 13N (AWG#28) | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force. |
| Mechanical Performance - Vibration | Current Discontinuity: 1 sec Max. Contact Resistance: 40m . Appearance: No damage. | Amplitude: 1.5mm p-p. Frequency: 10-55-10 Hz/minute. Duration: 2 hours for each direction (X, Y, Z axes). |
| Mechanical Performance - Durability | Contact Resistance: 40m . | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Environmental Performance - Thermal Aging | Contact Resistance: 40m . Appearance: No damage. | Temperature: 852. Period: 96 hours continuously. |
| Environmental Performance - Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed. | |
| Environmental Performance - Constant Humidity | Contact Resistance: 40m . Insulation Resistance: 1000m . Appearance: No damage. | Temperature: 402 C. Relative humidity: 90-95% (RH). Period: 96 hours continuously. |
| Environmental Performance - Temperature Cycling | No breakdown or flashover. Appearance: No damage. | One cycle consists of -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Environmental Performance - Salt Spray | Contact Resistance: 40m . Appearance: No damage. | Temperature: 35 3 C. Concentration: 51% NaCl solution. Period: Stamping before tin plated for 48 hours, or Stamping after tin plated for 8 hours. |
| Environmental Performance - Solder Ability | Area of soldering: 90 %. | Solder temperature: 245 5C. Immersion period: 3 0.5S. |
| Environmental Performance - Resistance to Soldering Heat | Appearance: No damage. | Soldering time: 30.5S. Soldering pot: 3505. Manual soldering tin process. |
2401091357_HCTL-HC-HY-4Y-B-05_C20417861.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
