connector strip HCTL HC-XG-2*15Y-05 suitable for electronic projects requiring 2.54 mm pitch spacing
Manufacturer:
HCTL
Description:
Connector Housing 30 Position 2.54mm Pitch Dual Row PBT -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Pitch:
2.54mm
Flame Retardant Rating:
UL94V-0
Number Of Rows:
2
Colour:
黑色
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Number Of PINs Per Row:
15
Plastic Material:
PBT
Number Of Positions Or Pins:
2x15P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-XG-2*15Y-05
Package:
P=2.54mm
Model Number:
HC-XG-2*15Y-05
Introduction
Product Overview
This specification covers the 2.54 series connector strip, including product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for a wide range of electronic applications.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: ROHS
- Material: PBT, Phosphor bronze, Brass
- Color: Black, White
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxidation, and peeling. | General Principles |
| Dimension | According to drawings | According to drawings |
| Exchangeable | Exchangeable with same specification products. | - |
| 3. Use Condition | ||
| Ambient temperature Range | -25 85 | - |
| Applicable Wire Sizes | AWG #2226 | - |
| Applicable PC board thickness | 1.6mm | - |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | - |
| Rated Current | 3A AC/DC | - |
| Withstand voltage | No breakdown or flashover | Apply 500V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | 20m (Initial value) | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | 10N (AWG#22) / 30N (AWG#24) / 20N (AWG#26) | Axial per minute to 25 3mm rate of the pullout force |
| Pin Retention Force | 10N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Interruption: 1 sec Max; Contact Resistance 40m | Amplitude 1.5mm p-p; Frequency :10-55-1O Hz/minute; Period: 2hour for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | Temperature852; Period96 hours continuously |
| Constant Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m | Relative humidity90-95% (RH); Period96 hours continuously; Temperature:402 C |
| Temperature Cycling | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover | One cycle consists of -553C 30min, room temp 10-15min, 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Appearance: No damage; Contact Resistance 40m | Temperature : 35 3 C; Concentration: 5 1 %; Period: 24H |
| Solder ability | Soldering area: 90 % | Solder temperature 245 5C; Immersion period:3 0.5S |
| Resistance to soldering heat (Wave soldering) | Appearance: No damage | Soldering temperature2605; Soldering time50.5S |
| Resistance to soldering heat (Manual soldering) | Appearance: No damage | Soldering pot3505; Soldering time30.5S |
2407111131_HCTL-HC-XG-2-15Y-05_C28314358.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
