2 Millimeter Pitch Double Row PHB Connector HCTL HC-PHB-2 19EY-05 For Electronic Circuit Connections
Manufacturer:
HCTL
Description:
Connector Housing 38 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
19
Number Of Positions Or Pins:
2x19P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*19EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*19EY-05
Introduction
Product Overview
This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It details the product's performance, test methods, and inspection requirements, ensuring interchangeability with similar specifications. The connector is designed for electrical and electronic applications, operating within a specified environmental range.
Product Attributes
- Brand: (HCTLDZ)
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
- Color: Nature (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | General Principles |
| Dimension | According to drawings | General Principles |
| Exchangeable | Exchangeable with same specification products. | General Principles |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | General Principles |
| Applicable Wire Sizes | AWG #2228 | General Principles |
| Applicable PC board thickness | 1.6mm | General Principles |
| 5. Material | ||
| Terminal Contact | Brass, 0.50mm thickness, Tin plating: 2.55 m | Material |
| Housing Plastic | Nylon66, UL94V-O, Color: Nature | Material |
| Plastic Wafer | Nylon66, UL94V-O, Color: Nature | Material |
| Contact Pin | Brass, 0.50mm thickness, Tin plating: 2.55 m | Material |
| Plastic Wafer (Vertical/Horizontal) | LCP, UL94V-0, Color: Nature | Material |
| Contact Pin (Vertical/Horizontal) | Phosphor bronze, 0.2mm thickness, Tin plating: 35 m | Material |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | Test Mode |
| Rated Current | 2A AC/DC | Test Mode |
| Withstand voltage | No breakdown or flashover | Apply 800V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Does not include wire resistance. |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | AWG#22: 50N; AWG#24: 30N; AWG#26: 20N; AWG#28: 13N | Axial pullout force of the crimped wire per minute at 25 3mm rate |
| Fixed terminals And hole seat | 12N | The terminal and the hole seat are pulled out from the hole in the seat at a rate of 25 3mm per minute along the write direction. |
| Single contact insertion force | 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 25 3mm inserting force test. |
| Seat pull-out force | 15N | Exerts a force on the pin end at a rate per minute 253mm until the needle exits the seat. |
| Pin Retention Force | AWG#22: 0.3N; AWG#24: 0.3N; AWG#26: 0.3N; AWG#28: 0.3N | Single contact withdrawal force |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Current Discontinuity 1 micro second; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Direction: X, Y, Z axes; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction. |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously. Connector combination condition is placed in the oven according to the following specifications high temperature aging test after the test and measurement of contact resistance. |
| Temperature Rise | (Value not specified) | Mate connector measures the temperature rise of contact when the maximum rated current is passed. |
| Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously. Connector combination condition is placed in constant temperature and humidity space according to the following specifications constant temperature and humidity test, after the experiment measuring contact resistance, insulation resistance and withstand voltage test. |
| Temperature cycling | Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle consists of -553C 30min, room temp 10-15min. Total cycle: 5 cycles. 853C 30min, room temp 10-15min. Same as paragraph 8.3. |
| Salt spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Concentration: 51%; Period: Stamping before tin plated for 24 hours, Stamping after tin plated for 8 hours. The combined state of connector as test samples salt spray test according to the following specifications test samples will be clean again with water to dry naturally measurement of contact resistance. |
| Solder ability | Soldering Area: 90 % | Solder temperature: 2455C; Immersion period: 3 0.5S. In accordance with the following specifications were placed tin soldering test. |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering time: 30.5S; Soldering pot: 3505. Wave soldering: Soldering time: 50.5S; Soldering pot: 2605. Operation mode: Position DIP type needle solder conductor or a fixed piece at the end of the 1.5mm distance. |
2310171743_HCTL-HC-PHB-2-19EY-05_C18548038.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
