electrical connector strip HCTL HC-PHB-2*18EY-05 2.00mm pitch double row type for pcb applications
Manufacturer:
HCTL
Description:
Connector Housing 36 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
18
Number Of Positions Or Pins:
2x18P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*18EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*18EY-05
Introduction
2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE
This specification covers the 2.00 series connector strip, detailing product performance, test methods, and inspection requirements. It is designed for applications requiring reliable electrical connections with specific environmental and mechanical tolerances.
Product Attributes
- Brand: (HCTLDZ)
- Origin: China
- Certifications: UL94V-O
Technical Specifications
| Item | Requirement | Test Mode |
| Scope | This specification applies to the 2.00 series connector strip, including product performance, test methods, and inspection requirements. | |
| Product surface should be free of defects, dirt, cracks, and mechanical damage. Contact parts should be free of rust, plating oxidation, and peeling. | ||
| Applicable wire sizes: AWG #2228 | ||
| Applicable PC board thickness: 1.6mm | ||
| Use Condition | Ambient temperature: -25 +85 | |
| Applicable wire sizes: AWG #2228 | ||
| Applicable PC board thickness: 1.6mm | ||
| Appearance and Dimension | Appearance: Product surface without defect, dirt, crack, and mechanical damage. Contact parts without rust, plating oxidation, and peeling. | |
| Dimension: According to drawings | ||
| Exchangeable: Exchangeable with same specification products. | ||
| Material | Terminal Contact: Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Housing Plastic: Nylon66 UL94V-O, Color: Nature | ||
| Plastic Wafer: Nylon66 UL94V-O, Color: Nature | ||
| Contact Pin: Phosphor bronze, Thickness 0.2mm, Tin plating: 35 m | ||
| Electrical Performance | Rated Voltage: 250V AC/DC | |
| Rated Current: 2A AC/DC | ||
| Withstand voltage: No breakdown or flashover | Apply 800V AC(rms)for 1 minute between adjacent contacts to measure the insulation resistance | |
| Contact Resistance: Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector | |
| Mechanical Performance | Terminal crimping wire pullout force: AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at a rate of 25 3mm per minute |
| Single contact withdrawal force: 0.3N | Axial pullout force at a rate of 25 3mm per minute | |
| Fixed terminals and hole seat force: 12N | Pullout force at a rate of 25 3mm per minute along the wire direction | |
| Seat pull-out force: 15N | Force applied to the pin end at a rate of 253mm per minute until the needle exits the seat | |
| Durability | Durability: 30 cycles | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. Contact Resistance 40m |
| Vibration: Amplitude 1.5mm p-p, Frequency 10-55-10Hz/minute, Period 2 hours for each direction (X, Y, Z) | Mate connector on welded circuit board, test for discontinuous current. Contact Resistance 40m | |
| Environmental Characteristics | Thermal Aging: Temperature: 852, Period: 96 hours | Connector in oven, measure contact resistance after test. Appearance: No damage. Contact Resistance 40m |
| Temperature Rise: Measure contact temperature rise when maximum rated current is passed. | ||
| Humidity: Relative humidity: 90-95% (RH), Period: 96 hours | Connector in constant temperature and humidity chamber, measure contact resistance, insulation resistance, and withstand voltage after test. Appearance: No damage. Contact Resistance 40m, Insulation Resistance 1000m | |
| Temperature Cycling | One cycle: -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycles: 5 | Connector subjected to thermal shock. Measure contact resistance, insulation resistance, and withstand voltage after test. Appearance: No damage. Contact Resistance 40m, Insulation Resistance 1000m |
| Temperature: 402 C | Same as paragraph 8.3 | |
| Salt Spray | Temperature: 353, Concentration: 51% | Connector subjected to salt spray test. Clean with water and dry naturally. Measure contact resistance. Appearance: No damage. Contact Resistance 40m |
| Solder Ability | Solder temperature: 2455C, Immersion period: 3 0.5S | Placed in tin soldering test. Soldering area: 90%. Stamping after tin plated for 8 hours or Stamping before tin plated for 24 hours. |
| Resistance to Soldering Heat | Manual Soldering: Soldering temperature: 350 5 , Soldering time: 3 0.5S. Wave Soldering: Soldering temperature: 260 5 C, Soldering time: 5 0.5S | DIP type needle solder position, 1.5mm distance from conductor or fixed piece. |
2310171743_HCTL-HC-PHB-2-18EY-05_C18548037.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
