Home > Products > Arrays, Edge Type, Mezzanine (Board to Board) >Rectangular Connector Housings > Durable electrical connector HCTL HC-ZH-4Y-05 double row 1.50 series suitable for AWG 26 to 32 wire sizes

Durable electrical connector HCTL HC-ZH-4Y-05 double row 1.50 series suitable for AWG 26 to 32 wire sizes

Manufacturer:
HCTL
Description:
Connector Housing 4 Position 1.5mm Pitch Single Row ZH Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
1.5mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
ZH
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-ZH-4Y-05
Package:
P=1.5mm
Model Number:
HC-ZH-4Y-05
Introduction

Product Overview

This specification document outlines the requirements for the 1.50 series ZH connector, a double-row type connector designed for various electrical applications. It details product performance, testing methods, and inspection requirements, ensuring interchangeability and reliability.

Product Attributes

  • Brand: HCTLDZ ()
  • Origin: Shenzhen, China
  • Certifications: UL94V-O (for Nylon and LCP materials)
  • Color: Nature (for Housing and Wafer), White (for Nylon66 Wafer)

Technical Specifications

SectionItemRequirementTest Mode
3. USE CONDITIONAmbient temperature-25 85
3. USE CONDITIONApplicable Wire SizesAWG #2632
3. USE CONDITIONApplicable PC board thickness0.6l.2mm
4. Appearance and DimensionAppearanceProduct surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling.
4. Appearance and DimensionDimensionAccording to drawings
4. Appearance and DimensionExchangeableExchangeable with same specification products.
5. MaterialTerminal Contact (P/N: HC-ZH - ****)Brass (0.50mm thick), Tin plating: 24 m OR Phosphor bronze (0.2mm thick), Tin plating: 24 m
5. MaterialHousing Plastic (P/N: HC-ZH - ****)Nylon UL94V-O(2), Color: Nature
5. MaterialWafer (P/N: HC-ZH - ****)Nylon UL94V-O(2), Color: Nature OR LCP UL94V-O, Color: Nature
6. Electrical PerformanceRated Voltage50V AC/DC
6. Electrical PerformanceRated Current1A AC/DC
6. Electrical PerformanceWithstand voltageNo breakdown or flashoverApply 500V AC(rms) for 1 minute between adjacent contacts
6. Electrical PerformanceContact ResistanceInitial value 20m (Does not include wire resistance)Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector
6. Electrical PerformanceInsulation Resistance 500 M Apply 500V DC(rms) for 1 minute between adjacent contacts
7. Mechanical PerformanceTerminal crimping Wire strength 20N (AWG#26), 8N (AWG#28), 6N (AWG#30), 0.5N (AWG#32)Axial pullout force at 253mm/min
7. Mechanical PerformanceSingle contact Withdrawal force 10NMate connector ends pulled out at 253mm/min
7. Mechanical PerformanceSingle contact insertion force 3NMate connector ends inserted at 253mm/min
7. Mechanical PerformancePin Retention Force 13NForce applied to pin end until needle exits seat at 253mm/min
7. Mechanical PerformanceDurabilityContact Resistance 40m; Appearance: No damageMate connector up to 30 cycles at 10 cycles/min before environmental test
7. Mechanical PerformanceVibrationCurrent Interruption: Max 1 sec; Contact Resistance 40m; Appearance: No damageAmplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/min; Period: 2 hours for each direction (X, Y, Z axis)
8. Endurance CharacteristicsThermal AgingContact Resistance 40m; Appearance: No damageTemperature: 852; Period: 96 hours continuously
8. Endurance CharacteristicsTemperature RiseMeasure temperature rise of contact when maximum rated current is passed
8. Endurance CharacteristicsHumidityContact Resistance 40m; Insulation Resistance 500m; Appearance: No damageTemperature: 402; Relative humidity: 90-95%; Period: 96 hours continuously
8. Endurance CharacteristicsTemperature CyclingContact Resistance 40m; Withstand voltage: No breakdown or flashover; Appearance: No damageOne cycle: -553 (30min) room temp (10-15min) 853 (30min) room temp (10-15min); Total cycle: 5 cycles
8. Endurance CharacteristicsSolder abilitySolder area: 90 %Solder temperature: 2455; Immersion period: 30.5S
8. Endurance CharacteristicsSalt sprayContact Resistance 40m; Appearance: No damageTemperature: 353; Solution: 51% NaCl; Period: Stamping after tin plated for 8 hours OR Stamping before tin plated for 48 hours

2401091402_HCTL-HC-ZH-4Y-05_C20417781.pdf

Send RFQ
Stock:
MOQ: