connector strip HCTL HC-JWPF-2x5Y-05 designed for AWG 22 to 26 wires and PC board thickness 08 to 16mm
Manufacturer:
HCTL
Description:
Connector Housing 10 Position 2mm Pitch Dual Row JWPF Series PBT -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
JWPF
Operating Temperature:
-25℃~+85℃
Plastic Material:
PBT
Number Of PINs Per Row:
5
Number Of Positions Or Pins:
2x5P
With Locker:
带锁扣
Row Spacing:
4mm
Mfr. Part #:
HC-JWPF-2x5Y-05
Package:
P=2mm
Model Number:
HC-JWPF-2x5Y-05
Introduction
Product Overview
This specification applies to the 2.00 series connector strip, covering product performance, test methods, and inspection requirements. It is designed for use with AWG #22~#26 wires and PC board thicknesses of 0.8~1.6mm, operating within an ambient temperature range of -25 to +85.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: ROHS, UL94V-O(2)
- Color: White
Technical Specifications
| Item | Requirement | Test Mode |
| Electrical Performance | Withstand voltage: 1000V AC (rms) for 1 minute, leakage current < 0.5mA | Apply 1000V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent termina1 and ground of the mate connectors |
| Contact Resistance: 20m (Initial value) | A maximum voltage of 20m V and maximum current of 1OOmA are applied to the Mate connector | |
| Insulation Resistance: 1000 M | Apply 500V DC(rms) for I minute between adjacent contacts to measure the insulation resistance | |
| Rated Voltage: 100V AC/DC, Rated Current: 3A AC/DC | - | |
| Mechanical Performance | Single contact insertion force: 5N | Housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force: 0.5N | Terminal and hole seat matched at a rate per minute to 253mm along the wire direction, pulled out from the hole seat | |
| Terminal crimping Wire strength: AWG#22: 15N, AWG#24: 30N, AWG#26: 20N | Axial pullout force at rate of 253mm per minute on crimped wire | |
| Pin Retention Force: 15N | Force applied on pin end at rate of 253mm per minute until needle exits seat | |
| Vibration: Amplitude 1.5mm p-p, Frequency 10-55-10 Hz/min, Duration 2 hours per direction (X, Y, Z axes), Current Discontinuity: 1 sec Max, Contact Resistance: 40m | Mate connector combination state, tested as per specification, check for discontinuous current, measure contact resistance after test | |
| Durability: 30 cycles (10 cycles/min) | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test, Contact Resistance: 40m | |
| Environmental Performance | Thermal Aging: Temperature 852, Period 96 hours continuously | Connector combination condition placed in high temperature aging test, measure contact resistance after test, Appearance: No damage, Contact Resistance: 40m |
| Temperature Rise: Measure temperature rise of contact when maximum rated current is passed | Mate connector measure the temperature rise of contact when the maximum rated current is passed | |
| Constant Humidity: Temperature 402, Relative humidity 90-95% RH, Period 96 hours continuously | Connector combination condition placed in constant temperature and humidity, measure contact resistance, insulation resistance, and withstand voltage after test, Appearance: No damage, Contact Resistance: 40m , Insulation Resistance: 1000m | |
| Salt Spray: Temperature 353, Concentration 51%, Period: 8 hours (after plating) / 48 hours (before plating) | Connector combination condition subjected to salt spray test, cleaned with water and dried naturally, measure contact resistance, Appearance: No damage, Contact Resistance: 40m |
2309211458_HCTL-HC-JWPF-2x5Y-05_C18198052.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
