Double Row PHB Connector 2.00MM Pitch HCTL HC-PHB-2*17EY-05 for Electronic Device Connection
Manufacturer:
HCTL
Description:
Connector Housing 34 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
17
Number Of Positions Or Pins:
2x17P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*17EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*17EY-05
Introduction
Product Overview
This specification document details the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of connectors.
Product Attributes
- Brand: (HCTLDZ)
- Origin: China
- Model: PHB (2.0) -05
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | General Principles |
| Dimension | According to drawings | General Principles |
| Exchangeable | Exchangeable with same specification products. | General Principles |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | General Principles |
| Applicable Wire Sizes | AWG #2228 | General Principles |
| Applicable PC board thickness | 1.6mm | General Principles |
| 5. Material | ||
| Terminal Contact | Brass, Thickness: 0.50mm, Tin plating: 2.55 m | - |
| Housing Plastic | Nylon66, UL94V-O, Color: Nature | - |
| Plastic Wafer | Nylon66, UL94V-O, Color: Nature | - |
| Contact Pin | Phosphor bronze, Thickness: 0.2mm, Tin plating: 35 m | - |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | - |
| Rated Current | 2A AC/DC | - |
| Withstand voltage | No breakdown or flashover | Apply 800V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at 25 3mm per minute |
| Fixed terminals And hole seat | 12N | Terminal and hole seat mating pullout force at 25 3mm per minute along the wire direction |
| Single contact insertion force | 5N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Seat pull-out force | 15N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exits seat |
| Durability | Contact Resistance 40m, Appearance: No damage | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity 1 micro second, Contact Resistance 40m, Appearance: No damage | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | - | Measure the temperature rise of contact when the maximum rated current is passed |
| Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Temperature: 402 C, Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Thermal Shock | Contact Resistance 40m, Insulation Resistance 1000m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle: -553C 30min, room temp 10-15min; 853C 30min, room temp 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Temperature: 353 C, Concentration: 51%, Period: Stamping before tin plated for 24 hours or Stamping after tin plated for 8 hours |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering temperature: 350 5 , Soldering time: 3 0.5S; Wave soldering: Soldering temperature: 260 5 C, Soldering time: 5 0.5S |
2310171743_HCTL-HC-PHB-2-17EY-05_C18548036.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
