Durable electrical connector strip HCTL HC-HY-4Y-05 suitable for demanding application environments
Manufacturer:
HCTL
Description:
Connector Housing 4 Position 2mm Pitch Single Row HY Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
HY
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
带锁扣
Row Spacing:
-
Mfr. Part #:
HC-HY-4Y-05
Package:
P=2mm
Model Number:
HC-HY-4Y-05
Introduction
Product Overview
This specification covers the 2.00 series of strip connectors, detailing product performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for various applications requiring stable performance under specified environmental and electrical conditions.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for LCP and Nylon66 materials)
Technical Specifications
| Item | Requirement | Test Mode |
| 1. Scope | ||
| This specification contents apply to 2.00 series connector strip, including product performance, test methods and inspection requirements. | ||
| 2. Applicable Standards | ||
| 2.1 GB/T2421 | Environmental of Electrical Connectors - Part 1: General | |
| 2.2 GB/T2423 | Environmental of Electrical Connectors | |
| 2.3 GB/T2424 | Environmental of Electrical Connectors | |
| 2.4 GB/T5095 | Testing procedure/method for components of electric equipment | |
| 3. Use Condition | ||
| Ambient temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 0.8l.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Housing Plastic Wafer | Nylon66 UL94V-O, Color: White | |
| Housing Plastic Wafer | LCP UL94V-O, Color: Nature | |
| Contact Pin | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Contact Pin | Phosphor bronze, Thickness 0.25mm, Tin plating: 35 m | |
| Contact Pin | Brass, Thickness 0.60mm, Tin plating: 35 m | |
| Contact Pin | Brass, Thickness 0.40mm, Tin plating: 35 m | |
| Contact Pin | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Wafer Straight Pin Seat | LCP UL94V-O, Color: Nature | |
| Wafer Straight Pin Seat | Nylon66 UL94V-O, Color: White | |
| Wafer Right Angle Seat | Nylon66 UL94V-O, Color: White | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand voltage | Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. | Apply 1000V AC(rms) for 1 minute between adjacent contacts. |
| Contact Resistance | Initial value 20m. Does not include wire resistance. | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. |
| Insulation Resistance | More than 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Single contact insertion force | Less than 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Single contact Withdrawal force | More than 1N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity. |
| Terminal crimping Wire strength | AWG#28: 13N, AWG#26: 20N, AWG#24: 30N, AWG#22: 50N | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force. |
| Pin Retention Force | 15N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force. |
| Seat pull-out force | 15N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Durability | Contact Resistance 40m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Current Discontinuity: 1 sec Max, Contact Resistance 40m | Amplitude: 1.5mm p-p, Frequency: 10-55-10 Hz/minute, Duration: 2 hours for each direction (X, Y, Z axis). |
| 8. Environmental Performance | ||
| Thermal Aging | Appearance: No damage, Contact Resistance 40m | Temperature: 852, Period: 96 hours continuously. |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed. | |
| Constant Humidity | Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m | Temperature: 402 C, Relative humidity: 90-95% (RH), Period: 96 hours continuously. |
| Temperature Cycling | Appearance: No damage, Contact Resistance 40m, Insulation Resistance 1000m, Withstand voltage: No breakdown or flashover. | One cycle consists of -553C 30min and 853C 30min, room temp 10-15min transition time. Total cycle: 5 cycles. |
| Salt Spray | Appearance: No damage, Contact Resistance 40m | Concentration: 51% NaCl solution, Temperature: 353 C, Period: Stamping before tin plated for 48 hours, Stamping after tin plated for 8 hours. |
| Solder ability | Area of soldering: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S. |
| Resistance to soldering heat | Appearance: No damage | Soldering time: 30.5S, Soldering pot: 3505. |
2401091357_HCTL-HC-HY-4Y-05_C20417797.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
