Home > Products > Arrays, Edge Type, Mezzanine (Board to Board) >Rectangular Connector Housings > Double Row 2.50mm Pitch Connector HCTL HC XHB 4Y 05 Tested for Mechanical Damage and Surface Defects

Double Row 2.50mm Pitch Connector HCTL HC XHB 4Y 05 Tested for Mechanical Damage and Surface Defects

Manufacturer:
HCTL
Description:
Connector Housing 4 Position 2.5mm Pitch Single Row XHB Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2.5mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
XHB
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
带锁扣
Row Spacing:
-
Mfr. Part #:
HC-XHB-4Y-05
Package:
P=2.5mm
Model Number:
HC-XHB-4Y-05
Introduction

Product Overview

This specification covers the 2.50mm pitch XHB connector, double row type. It details product performance, test methods, and inspection requirements for electrical connectors, designed for various applications.

Product Attributes

  • Brand: HCTLDZ ()
  • Origin: Shenzhen, China
  • Material: Brass, LCP, Nylon66, Phosphor bronze
  • Color: White, Nature (Brass)
  • Certifications: UL94V-0

Technical Specifications

Category Item Specification Test Method
General Principles Scope This specification content is applicable to 2.50 series strip connectors, including product performance, test methods and test requirements. -
Applicable Standards GB/T2421, GB/T2423, GB/T2424, GB/T5095 -
Appearance Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled. -
Exchangeable Exchangeable with same specification products. -
Use Condition Ambient Temperature -40 +105 -
Applicable Wire Sizes AWG #2228 -
Applicable PC board thickness 1.6mm -
Material Terminal Contact Brass, Thickness 0.64mm, Tin plating: 2.55 m -
Housing Plastic Wafer LCP UL94V-0, Color: White -
Contact Pin Brass, Thickness 0.64mm, Tin plating: 2.55 m, Color: Nature -
Housing Plastic Wafer (Right Angle/Horizontal) Nylon66 UL94V-O, Color: White -
Housing Plastic Wafer (Right Angle/Vertical) Nylon66 UL94V-O, Color: White -
Electrical Performance Rated Voltage 250V AC/DC -
Rated Current 3A AC/DC -
Withstand Voltage Apply 1000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors -
Insulation Resistance More than 1000 M Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
Mechanical Performance Terminal crimping Wire strength AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N Axial pullout force at a rate of 25 3mm per minute
Terminal and hole seat fixed force 10N Pullout force test at a rate of 25 3mm per minute
Single contact insertion force 5.5N Inserting force test at a rate of 25 3mm per minute
Seat pull-out force 20N Pullout force test until the needle exits at a rate of 253mm per minute
Durability Contact Resistance 40m , Appearance: No damage Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
Environmental Performance Thermal Aging Contact Resistance 40m , Appearance: No damage Temperature: 852, Period: 96 hours continuously
Humidity Contact Resistance 40m , Insulation Resistance 1000m , Appearance: No damage Relative humidity: 90-95% (RH), Period: 96 hours continuously
Temperature Cycling No breakdown or flashover One cycle consists of -553C 30min, room temp 10-15min, then 853C 30min, room temp 10-15min. Total cycle: 5 cycles.

2401091205_HCTL-HC-XHB-4Y-05_C20417833.pdf

Send RFQ
Stock:
MOQ: