2.00mm Pitch Double Row Connector HCTL HC-PH-2Y-L-05 Electrical Component with Tin Plated Contacts
Manufacturer:
HCTL
Description:
Connector Housing 2 Position 2mm Pitch Single Row PH Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
蓝色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
PH
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
2
Number Of Positions Or Pins:
1x2P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-PH-2Y-L-05
Package:
P=2mm
Model Number:
HC-PH-2Y-L-05
Introduction
Product Overview
This specification covers the 2.00mm pitch PH connector, double row type. It details product performance, test methods, and inspection requirements for electrical and mechanical applications.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Material (Housing): Nylon66 UL94V-0
- Material (Contact): Brass (Tin plating: 2.5-5m) or Phosphor bronze (Tin plating: 2-4m)
- Color (Housing): White
- Certifications: ROHS
Technical Specifications
| Item | Requirement | Test Mode |
| General Principles | ||
| Scope | This specification applies to the 2.0 series connector strip, including product performance, test methods and test requirements. | |
| Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 | |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, peeling, etc. | |
| Exchangeability | Products of the same specification should be interchangeable. | |
| Use Condition | ||
| Ambient Temperature | -25 +85 | |
| Applicable Wire Sizes | AWG #24#30 | |
| Applicable PC Board Thickness | 0.81.6mm | |
| Electrical Performance | ||
| Rated Voltage | 100V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand Voltage | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | 20m (Initial value) | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector. Does not include wire resistance. |
| Insulation Resistance | 1000 M | Apply 1000V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| Mechanical Performance | ||
| Terminal Crimping Wire Strength | 30N (AWG#24), 20N (AWG#26), 13N (AWG#28), 8N (AWG#30) | Axial pullout force at a rate of 25 3mm per minute. |
| Fixed Terminals and Hole Seat | 12N | The terminal and the hole seat are pulled out from the hole in the seat capacity at a rate of 25 3mm per minute along the wire direction. |
| Single Contact Withdrawal Force | 2N | Single contact withdrawal force. |
| Fixed Pin Force | 12N | Force is applied to the pin end at a rate of 25 3mm per minute until the needle exits the seat. |
| Single Contact Insertion Force | 10N | Housing together with terminal ends with wafer matched at a rate of 25 3mm per minute inserting force test. |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Contact Resistance 40m; Current Discontinuity: Max 1 micro second | Mate connector combination state on the welding circuit board as test samples, subjected to vibration test. Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Duration: 2 hours for each direction (X, Y, Z axes). |
| Environmental Performance | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Connector combination placed in a heating oven at 852 for 96 hours continuously. |
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed. | |
| Constant Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Connector combination placed in a constant temperature and humidity chamber at 402 and 90-95% RH for 96 hours continuously. |
| Temperature Cycling | Appearance: No damage; Withstand Voltage: No breakdown or flashover | One cycle: -553 for 30min, then room temp for 10-15min; followed by 853 for 30min, then room temp for 10-15min. Total 5 cycles. |
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Test samples placed in a salt spray chamber at 353 with 51% salt solution. Stamping after tin plated for 8 hours or Stamping before tin plated for 24 hours. |
| Solder Ability | Soldering Area: 90% | Soldering temperature: 2455; Immersion period: 3 0.5S. |
| Resistance to Soldering Heat | Appearance: No damage | Wave soldering: 2605 for 50.5S. Hand soldering: 3505 for 30.5S. Solder position: 1.5mm for DIP type, 0.5mm for SMT type from conductor/fixed piece end. |
2401091215_HCTL-HC-PH-2Y-L-05_C20417853.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
