2.00mm Pitch Double Row PHB Connector Suitable for Electrical Equipment HCTL HC-PHB-2*5EY-05 Durable
Manufacturer:
HCTL
Description:
Connector Housing 10 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
5
Number Of Positions Or Pins:
2x5P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*5EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*5EY-05
Introduction
Product Overview
This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It details the product's performance, testing methods, and inspection requirements, ensuring interchangeability with components of the same specification. Designed for electrical and electronic equipment, this connector is suitable for various environmental conditions and applications within specified wire gauge and PCB thickness ranges.
Product Attributes
- Brand: (HCTLDZ)
- Origin: China
- Model: PHB (2.0) -05
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
- Color: Nature (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Item | Requirement | Test Mode |
| 1. Scope | ||
| General Principles | Product performance, test methods and inspection requirements | |
| 2. Applicable Standards | ||
| Environmental Testing | GB/T2421, GB/T2423, GB/T2424 | |
| Basic Test Rules & Measurement Methods | GB/T5095 | |
| 3. Use Condition | ||
| Ambient Temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Housing Plastic | Nylon66 UL94V-O, Color: Nature | |
| Plastic Wafer | Nylon66 UL94V-O, Color: Nature | |
| Contact Pin | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand Voltage | No breakdown or flashover. Apply 800V AC(rms) for 1 minute between adjacent contacts and ground. Leakage current 0.5mA. | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m. Apply 20mV and 100mA to mate connectors. Does not include wire resistance. | A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector |
| Insulation Resistance | 1000 M. Apply 500V DC for 1 minute between adjacent contacts. | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at 253mm/min |
| Fixed terminals And hole seat | 12N | Housing together with terminal ends with wafer matched at 253mm/min inserting force test |
| Single contact insertion force | 5N | Housing together with terminal ends with wafer matched at 253mm/min inserting force test |
| Seat pull-out force | 15N | Exerts a force on the pin end at 253mm/min until the needle exits seat |
| Pin Retention Force | 0.3N | |
| Durability | Contact Resistance 40m. Appearance: No damage. Current Interruption: 1 sec Max. | Mate connectors up to 30 cycles at a maximum rate of 10 cycles/min prior to environmental test. |
| Vibration | Appearance: No damage. Contact Resistance 40m. No discontinuous current phenomenon. | Amplitude: 1.5mm p-p. Frequency: 10-55-10Hz/min. Direction: X, Y, Z axes. Period: 2 hours for each direction. |
| 8. Environmental Characteristics | ||
| Thermal Aging | Appearance: No damage. Contact Resistance 40m. | Temperature: 852. Period: 96 hours continuously. |
| Temperature Rise | Measure conductor temperature rise when maximum rated current is passed. | Connector in combined state measure the temperature rise of contact when the maximum rated current is passed. |
| Humidity | Appearance: No damage. Contact Resistance 40m. Insulation Resistance 1000m. | Constant temperature and humidity test: Temperature: 402, Relative humidity: 90-95% RH. Period: 96 hours continuously. |
| Thermal Shock | Appearance: No damage. Contact Resistance 40m. Insulation Resistance 1000m. Withstand Voltage: No breakdown or flashover. | One cycle: -553 for 30min, room temp 10-15min; 853 for 30min, room temp 10-15min. Total cycles: 5. |
| Temperature Cycling | Same as paragraph 8.3 | Same as paragraph 8.3 |
| Salt Spray | Appearance: No damage. Contact Resistance 40m. | Temperature: 353. Concentration: 51% NaCl solution. Period: Stamping after tin plated for 8 hours OR Stamping before tin plated for 24 hours. |
| Solder Ability | Soldering area: 90%. | Solder temperature: 2455. Immersion period: 3 0.5S. |
| Resistance to Soldering Heat | Manual Soldering: Soldering temperature: 350 5, Time: 30.5S. Wave Soldering: Soldering temperature: 260 5, Time: 50.5S. Position: 1.5mm from end of conductor or fixed piece. | |
2310171743_HCTL-HC-PHB-2-5EY-05_C18548024.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
