2 Millimeter Pitch PH Connector Double Row Type HCTL HC-PH-5Y-05 Suitable for AWG 24 to 30 Wire Sizes
Manufacturer:
HCTL
Description:
Connector Housing 5 Position 2mm Pitch Single Row PH Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
PH
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
5
Number Of Positions Or Pins:
1x5P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-PH-5Y-05
Package:
P=2mm
Model Number:
HC-PH-5Y-05
Introduction
Product Overview
This specification document outlines the details for the 2.00MM PITCH PH CONNECTOR DOUBLE ROW TYPE, part number HC-PH - ****. It covers product performance, test methods, and inspection requirements for this series of connectors.
Product Attributes
- Brand: (HCTLDZ)
- Origin: China
- Certifications: UL94V-0, ROHS
- Color: White (Housing), Nature (Contact)
Technical Specifications
| Item | Requirement | Test Mode |
| 3. USE CONDITION | ||
| Ambient temperature | -25 85 | |
| Applicable Wire Sizes | AWG #2430 | |
| Applicable PC board thickness | 0.8l.6mm | |
| 4Appearance and Dimension | ||
| Appearance | Product surface without defect dirtcrackand mechanical damage, Contact without rust plating not oxides and not peeled | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5Material | ||
| Terminal | Brass, Thickness 0.50mm, Tin plating:2.55 m | |
| Housing | Nylon66 UL94V-0, Color: White | |
| Contact | Brass, Thickness 0.50mm, Tin plating:2.55 m | |
| Plastic Wafer | Nylon66 UL94V-0, Color: White | |
| Contact | Phosphor bronze, Thickness 0.2mm, Tin plating:24 m | |
| 6Electrical Performance | ||
| Rated Voltage | 100V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 800V AC(rms)for I minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20m V and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | More than lOOO M | Apply 1000V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7Mechanical Performance | ||
| Terminal crimping Wire strength | AWG#24: 30N, AWG#26: 20N, AWG#28: 13N, AWG#30: 8N | Axial pullout force at 25 3mm/min |
| Single contact Withdrawal force | 2N | Axial pullout force at 25 3mm/min |
| Fixed terminals And hole seat | 12N | Pullout force at 25 3mm/min along the wire direction |
| Single contact insertion force | 10N | Inserting force test at 25 3mm/min |
| Seat pull-out force | 12N | Force applied to pin end until needle exits at 253mm/min |
| Pin Retention Force | 12N | Inserting force test at 25 3mm/min |
| Durability | Contact Resistance 40m , Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles/min prior to environmental test |
| Vibration | Contact Resistance 40m , Current Discontinuity: Max 1 sec | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/min, Period: 2 hours for each direction (X, Y, Z axes) |
| 8Environmental Performance | ||
| Thermal Aging | Contact Resistance 40m , Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | |
| Humidity | Contact Resistance 40m , Insulation Resistance 1000m , Appearance: No damage | Temperature: 402, Relative humidity: 90-95% RH, Period: 96 hours continuously |
| Temperature cycling | Contact Resistance 40m , Insulation Resistance 1000m , Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle: -553C (30min) -> 10-15min room temp -> 853C (30min) -> 10-15min room temp. Total cycles: 5 |
| Salt spray | Contact Resistance 40m , Appearance: No damage | Temperature: 353, Concentration: 51% Salt Solution, Period: Stamping after tin plated for 8 hours (or Stamping before tin plated for 24 hours) |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: 260 5C, 5 0.5S. Hand soldering: 350 5C, 3 0.5S. Solder position: 1.5mm (DIP) or 0.5mm (SMT) from conductor/fixed piece end. |
2401091215_HCTL-HC-PH-5Y-05_C20417762.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
