2.00mm Pitch PH Connector Double Row Type HCTL HC-PH-4Y-B-05 for Electrical Electronic Applications
Manufacturer:
HCTL
Description:
Connector Housing 4 Position 2mm Pitch Single Row PH Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
黑色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
PH
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
4
Number Of Positions Or Pins:
1x4P
With Locker:
不带锁扣
Row Spacing:
-
Mfr. Part #:
HC-PH-4Y-B-05
Package:
P=2mm
Model Number:
HC-PH-4Y-B-05
Introduction
Product Overview
This specification covers the 2.00MM PITCH PH CONNECTOR DOUBLE ROW TYPE, designed for electrical and electronic applications. It details product performance, test methods, and inspection requirements, ensuring interchangeability and reliability under specified environmental conditions.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-0 (for Nylon66 housing)
- Color: White (Housing), Nature (Contact)
- Material: Brass (Contact), Nylon66 (Housing), Phosphor bronze (Contact)
Technical Specifications
| Item | Requirement | Test Mode |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | |
| Applicable Wire Sizes | AWG #2430 | |
| Applicable PC board thickness | 0.81.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangeable with same specification products. | |
| 6. Electrical Performance | ||
| Rated Current | 2A AC/DC | |
| Rated Voltage | 100V AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 1000V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping wire strength | 30N (AWG#24), 20N (AWG#26), 13N (AWG#28), 8N (AWG#30) | Axial pullout force at 25 3mm/min |
| Single contact Withdrawal force | 2N | Axial pullout force at 25 3mm/min |
| Fixed terminals And hole seat | 12N | Pullout force at 25 3mm/min along the wire direction |
| Single contact insertion force | 10N | Inserting force test at 25 3mm/min |
| Seat pull-out force | 12N | Force applied to pin end until needle exits seat at 253mm/min |
| Pin Retention Force | ||
| Durability | Contact Resistance 40m | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Appearance: No damage; Contact Resistance 40m; Current Discontinuity: Max 1 micro second | Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axes) |
| 8. Environmental Performance | ||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | Temperature: 852; Period: 96 hours continuously |
| Temperature Rise | Measure contact temperature rise when maximum rated current is passed | |
| Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| Temperature cycling | No breakdown or flashover | One cycle: -553C for 30min, then 853C for 30min, with 10-15min transition time. Total 5 cycles. |
| Salt spray | Appearance: No damage; Contact Resistance 40m | Temperature: 353; Concentration: 51% Salt Solution; Period: Stamping after tin plated for 8 hours / Stamping before tin plated for 24 hours |
| Solder ability | Soldering Area: 90% | Solder temperature: 2455C; Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Wave soldering: 260 5C, 5 0.5S; Hand soldering: 350 5C, 3 0.5S |
2401091215_HCTL-HC-PH-4Y-B-05_C20417852.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
