2 Millimeter Pitch Double Row PHB Connector Strip HCTL HC-PHB-2*10EY-05 for Electronic Applications
Manufacturer:
HCTL
Description:
Connector Housing 20 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
10
Number Of Positions Or Pins:
2x10P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*10EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*10EY-05
Introduction
Product Overview
This specification document details the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of strip connectors. The product is designed for electrical and electronic applications, offering reliable performance under various environmental conditions.
Product Attributes
- Brand: (HCTLDZ)
- Origin: China
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
- Color: Nature (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Section | Item | Requirement | Test Mode |
|---|---|---|---|
| Scope | 1. Scope | This specification applies to the 2.00 series connector strip, including product performance, test methods, and inspection requirements. | |
| Applicable Standards | 2.1 GB/T2421 | Testing method for Environmental of Electrical Connectors | |
| 2.2 GB/T2423 | Electrical electronic product environmental test - Part 1: General principles | ||
| 2.3 GB/T2424 | Testing method for Environmental of Electrical Connectors | ||
| 2.4 GB/T5095 | Testing procedure/method for components of electric equipment | ||
| Use Condition | 3.1 Ambient temperature Range | -25 85 | |
| 3.2 Applicable Wire Sizes | AWG #2228 | ||
| 3.3 Applicable PC board thickness | 1.6mm | ||
| Appearance and Dimension | 4.1 Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | |
| 4.2 Dimension | According to drawings | ||
| 4.3 Exchangeable | Exchangeable with same specification products. | ||
| Material | 5.1 Terminal Contact | Brass, 0.50mm thickness, Tin plating: 2.55 m | |
| 5.2 Housing Plastic | Nylon66, UL94V-O, Color: Nature | ||
| 5.3 Plastic Wafer | Nylon66, UL94V-O, Color: Nature | ||
| 5.4 Contact Pin | Brass, 0.50mm thickness, Tin plating: 2.55 m | ||
| Electrical Performance | 6.1 Rated Voltage | 250V AC/DC | |
| 6.2 Rated Current | 2A AC/DC | ||
| 6.3 Withstand voltage | 800V AC(rms) for 1 minute between adjacent contacts, leakage current 0.5mA. No breakdown or flashover. | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. | |
| 6.4 Contact Resistance | 20m (Initial value) | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector. Does not include wire resistance. | |
| 6.5 Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. | |
| Mechanical Performance | 7.1 Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at a rate of 25 3mm per minute. |
| 7.2 Fixed terminals And hole seat | 12N | The terminal and the hole seat are pulled out from the hole in the seat capacity at a rate of 25 3mm per minute along the wire direction. | |
| 7.3 Single contact insertion force | 5N | Housing together with terminal ends with wafer matched at a rate of 25 3mm per minute inserting force test. | |
| 7.4 Single contact Withdrawal force | 0.3N | ||
| 7.5 Pin Retention Force | 15N | Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat. | |
| 7.6 Durability | Contact Resistance 40m, Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. | |
| 7.7 Vibration | Contact Resistance 40m, Current Discontinuity 1 sec, Appearance: No damage | Amplitude: 1.5mm p-p. Directions: X, Y, Z axes. Frequency: 10-55-10Hz/minute. Period: 2 hours for each direction. | |
| Environmental Performance | 8.1 Thermal Aging | Contact Resistance 40m, Appearance: No damage | Connector combination condition is placed in a heating oven. Temperature: 852. Period: 96 hours continuously. |
| 8.2 Temperature Rise | Measure the temperature rise of contact when the maximum rated current is passed. | ||
| 8.3 Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Connector combination under constant temperature and humidity. Temperature: 402. Relative humidity: 90-95% (RH). Period: 96 hours continuously. | |
| 8.4 Temperature cycling | Contact Resistance 40m, Insulation Resistance 1000m, Withstand voltage: No breakdown or flashover, Appearance: No damage | One cycle: -553 for 30min, room temp for 10-15min; then 853 for 30min, room temp for 10-15min. Total cycles: 5. | |
| 8.5 Salt spray | Contact Resistance 40m, Appearance: No damage | Temperature: 353. Concentration: 51%. Period: Stamping before tin plated for 24 hours OR Stamping after tin plated for 8 hours. | |
| 8.6 Solder ability | Soldering area: 90 % | Solder temperature: 2455. Immersion period: 3 0.5S. | |
| 8.7 Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering temperature: 350 5. Soldering time: 3 0.5S. Position: 1.5mm distance from conductor or fixed piece end. Wave soldering: Soldering temperature: 260 5. Soldering time: 5 0.5S. |
2310171743_HCTL-HC-PHB-2-10EY-05_C18548029.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
