2.00MM Pitch PHB Connector Double Row Type HCTL HC-PHB-2*9EY-05 Suitable for Electrical Applications
Manufacturer:
HCTL
Description:
Connector Housing 18 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
9
Number Of Positions Or Pins:
2x9P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*9EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*9EY-05
Introduction
Product Overview
This specification covers the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, designed for electrical applications requiring reliable connections. It details product performance, test methods, and inspection requirements, ensuring interchangeability with same specification products.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
- Color: Nature (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | General Principles |
| Dimension | According to drawings | General Principles |
| Exchangeable | Exchangeable with same specification products. | General Principles |
| 3. Use Condition | ||
| Ambient Temperature | -25 +85 | General Principles |
| Applicable Wire Sizes | AWG #22#28 | General Principles |
| Applicable PC board thickness | 1.6mm | General Principles |
| 5. Material | ||
| Terminal Contact | Brass, 0.50mm thickness, Tin plating: 2.55m | N/A |
| Housing Plastic | Nylon66, UL94V-O, Color: Nature | N/A |
| Plastic Wafer | Nylon66, UL94V-O, Color: Nature | N/A |
| Contact Pin | Phosphor bronze, 0.2mm thickness, Tin plating: 35m | N/A |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | Test Mode |
| Rated Current | 2A AC/DC | Test Mode |
| Withstand Voltage | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | 50N (AWG#22), 30N (AWG#24), 20N (AWG#26), 13N (AWG#28) | Axial pullout force per contact at a rate of 253mm per minute |
| Fixed terminals And hole seat | 12N | Pullout force of terminal from hole seat at a rate of 253mm per minute along the wire direction |
| Single contact insertion force | 5N | Inserting force test at a rate of 253mm per minute |
| Seat pull-out force | 15N | Force applied to the pin end at a rate of 253mm per minute until the needle exits the seat |
| Pin Retention Force | N/A | N/A |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Interruption: 1 sec Max; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| Temperature Rise | N/A | Measure the temperature rise of contact when the maximum rated current is passed |
| Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| Temperature Cycling | Contact Resistance 40m; Insulation Resistance 1000m; Withstand Voltage: No breakdown or flashover; Appearance: No damage | One cycle: -553C (30min) -> room temp (10-15min) -> 853C (30min) -> room temp (10-15min); Total cycles: 5 |
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Concentration: 51%; Period: Stamping before tin plated for 24 hours OR Stamping after tin plated for 8 hours |
| Solder Ability | Soldering Area: 90 % | Solder temperature: 2455C; Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering temperature: 350 5; Soldering time: 3 0.5S (Position 1.5mm from end of conductor or fixed piece) Wave soldering: Soldering temperature: 260 5C; Soldering time: 5 0.5S |
2310171743_HCTL-HC-PHB-2-9EY-05_C18548028.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
