2.00mm Pitch PHB Connector Double Row Type HCTL HC-PHB-2*8EY-05 Electrical Connector for Wire and PCB
Manufacturer:
HCTL
Description:
Connector Housing 16 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
8
Number Of Positions Or Pins:
2x8P
With Locker:
不带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*8EY-05
Package:
P=2mm
Model Number:
HC-PHB-2*8EY-05
Introduction
Product Overview
The 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE is a series of connectors designed for electrical applications. It offers reliable performance, with specifications covering electrical, mechanical, and environmental characteristics. This connector is suitable for use with various wire gauges and PC board thicknesses, ensuring interchangeability with products of the same specification.
Product Attributes
- Brand: HCTLDZ ()
- Origin: China
- Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
- Color: Nature (for Housing Plastic and Plastic Wafer)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, peeling, etc. | General Principles |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 1.6mm | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | |
| Withstand voltage | No breakdown or flashover | Apply 500V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | Apply 800V AC (rms) for 1 minute between adjacent terminals and ground of mate connectors, leakage current must be less than 0.5mA |
| 7. Mechanical Performance | ||
| Terminal crimping wire pullout force | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force at a rate of 25 3mm per minute |
| Terminal and hole seat fixed force | 12N | Mate housing and terminals with wafer at a rate of 25 3mm per minute |
| Single contact withdrawal force | 0.3N | Terminal pulled out from the hole seat at a rate of 25 3mm per minute along the wire direction |
| Single contact insertion force | 5N | Pin end force applied at a rate of 25 3mm per minute |
| Pin Retention Force | 15N | Mate housing and terminals with wafer at a rate of 25 3mm per minute |
| Durability | Contact Resistance 40m; Appearance: No damage | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity 1 micro second; Contact Resistance 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axis) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | Connector in combined state |
| Humidity | Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage | Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| Thermal Shock | Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover; Appearance: No damage | Cycle: -553 (30min) -> 10-15min room temp -> 853 (30min) -> 10-15min room temp. Total cycle: 5 cycles |
| Salt Spray | Contact Resistance 40m; Appearance: No damage | Temperature: 353; Concentration: 51% (NaCl solution); Period: Stamping before tin plated for 24 hours or Stamping after tin plated for 8 hours |
| Solder Ability | Soldering area: 90 % | Solder temperature: 2455; Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: Soldering temperature: 350 5 ; Soldering time: 3 0.5S. Wave soldering: Soldering temperature: 260 5 C; Soldering time: 5 0.5S |
2310171743_HCTL-HC-PHB-2-8EY-05_C18548027.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
