2.50mm pitch double row strip connector electrical component HCTL HC-XHB-5Y-05 with latch design
Manufacturer:
HCTL
Description:
Connector Housing 5 Position 2.5mm Pitch Single Row XHB Series PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2.5mm
Colour:
白色
Number Of Rows:
1
With Wings:
不带翅
Reference Series:
XHB
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
5
Number Of Positions Or Pins:
1x5P
With Locker:
带锁扣
Row Spacing:
-
Mfr. Part #:
HC-XHB-5Y-05
Package:
P=2.5mm
Model Number:
HC-XHB-5Y-05
Introduction
Product Overview
This specification covers the 2.50MM PITCH XHB CONNECTOR DOUBLE ROW TYPE, designed for electrical applications. It details the product's performance, test methods, and inspection requirements, ensuring interchangeability with same specification products.
Product Attributes
- Brand: HCTLDZ ()
- Model Series: XHB (2.50) Single Row with Latch
- Origin: Shenzhen, China
- Certifications: UL94V-0
Technical Specifications
| Item | Requirement | Test Mode | |||||
| 1. Scope | |||||||
| This specification content is applicable to the 2.50 series strip connector, including product performance, test methods and test requirements. Applicable to 2.50 series strip connector. | |||||||
| 2. Applicable Standards | |||||||
| General Principles | GB/T2421 | Testing method for Environmental of Electrical Connectors Part 1: General Principles | |||||
| Environmental Testing | GB/T2423 | Testing method for Environmental of Electrical Connectors | |||||
| Environmental Testing Guidelines | GB/T2424 | Testing method for Environmental of Electrical Connectors | |||||
| Basic Test Rules and Measurement Methods for Electromechanical Components for Electrical Equipment | GB/T5095 | Testing procedure/method for components of electric equipment | |||||
| 3. Use Condition | |||||||
| Ambient Temperature | -40 +105 | ||||||
| Applicable Wire Sizes | AWG #2228 | ||||||
| Applicable PC board thickness | 1.6mm | ||||||
| 4. Appearance and Dimension | |||||||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled. | ||||||
| Dimension | According to drawings | ||||||
| Interchangeability | Exchangeable with same specification products. | ||||||
| 5. Material | |||||||
| Part No. | Type | Explain | Material | Thickness | Plating | UL Rating | Color |
| Terminal Contact | Contact Pin | Brass | 0.64mm | Tin plating: 2.55 m | Nature | ||
| Housing Plastic | -Y | Plastic Wafer | Nylon66 | UL94V-0 | White | ||
| Housing Plastic | Plastic Wafer-A | Nylon66 | Tin plating: 2.55 m | UL94V-0 | White | ||
| Housing Plastic | Plastic Wafer-AW | Nylon66 | Tin plating: 2.55 m | UL94V-0 | White | ||
| Housing Plastic | Plastic Wafer-AWD | Nylon66 | Tin plating: 2.55 m | UL94V-0 | White | ||
| Contact | Contact Pin | Brass | 0.64mm | Tin plating: 2.55 m | Nature | ||
| Wafer | / | Wafer | Phosphor bronze | 0.2mm | Tin plating: 24 m | White | |
| Wafer | / | Wafer | Brass | 0.64mm | Tin plating: 2.55 m | White | |
| 6. Electrical Performance | |||||||
| Rated Voltage | 250V AC/DC | ||||||
| Rated Current | 3A AC/DC | ||||||
| Withstand voltage | Apply 1000V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. | Apply 1000V AC(rms)for I minute between adjacent contacts to measure the insulation resistance. | |||||
| Contact Resistance | Initial value 20m | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. Does not include wire resistance. | |||||
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. | |||||
| 7. Mechanical Performance | |||||||
| Terminal crimping Wire strength | AWG#22: 50N AWG#24: 30N AWG#26: 20N AWG#28: 13N | Axial pullout force per contact at a rate of 25 3mm per minute. | |||||
| Fixed terminals And hole seat | 10N | The terminal and the hole seat are pulled out from the hole in the seat at a rate of 25 3mm per minute along the wire direction. | |||||
| Single contact insertion force | 5.5N | The housing together with the terminal ends with wafer matched at a rate of 25 3mm inserting force test. | |||||
| Seat pull-out force | 20N | Exerts a force on the pin end at a rate of 253mm per minute until the needle exits the seat. | |||||
| Pin Retention Force | 1.5N | Single contact withdrawal force. | |||||
| Durability | Contact Resistance 40m; Appearance: No damage; Max Current Discontinuity 1 micro second | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. | |||||
| Vibration | Appearance: No damage; Contact Resistance 40m | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Period: 2 hours for each direction (X, Y, Z axis). | |||||
| 8. Environmental Performance | |||||||
| Thermal Aging | Appearance: No damage; Contact Resistance 40m | Temperature: 852; Period: 96 hours continuously. Connector combination condition is placed in accordance with the specifications for high temperature aging test. | |||||
| Temperature Rise | Measure the temperature rise of contact when the maximum rated current is passed. | Connector combination is placed in a heating oven according to the specifications for high temperature aging test. | |||||
| Humidity | Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m | Relative humidity: 90-95% (RH); Period: 96 hours continuously. Connector combination condition is placed in accordance with the specifications for constant temperature and humidity test. | |||||
| Temperature cycling | No breakdown or flashover | One cycle consists of -553C for 30min, room temp for 10-15min, then 853C for 30min, room temp for 10-15min. Total cycles: 5. | |||||
| Salt spray | Appearance: No damage; Contact Resistance 40m | Temperature: 353; Concentration: 51%; Period: 24H. Connector combination is placed in salt spray test, then rinsed with clean water and dried naturally. | |||||
| Solder ability | Soldering area: 90% | Solder temperature: 2455C; Immersion period: 3 0.5S. | |||||
| Resistance to soldering heat | DIP type: Position 1.5mm from conductor/fixed piece end. SMT type: Position 0.05mm from conductor/fixed piece end. Soldering time: 50.5S. Soldering pot: 260 5C. | ||||||
2401091205_HCTL-HC-XHB-5Y-05_C20417834.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
|
|
|
Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical |
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
