Automotive interface connector HRS ZE064W-14DS-HU/R B with double-layer spring and 3-point contact design
ZE064W Series: Small and Waterproof Connector for Automotive Interface
The ZE064W Series is a compact and waterproof connector designed for demanding automotive and industrial applications. Its space-saving design, high vibration and heat resistance, and IP67/IP69K waterproof rating make it ideal for use in harsh environments, including engine rooms. The connector features a double-layer spring, 3-point contact, and 3 serrations for superior vibration resistance, and can operate at temperatures up to 125. Mating keys prevent mis-mating, and a retainer ensures high contact reliability by preventing incomplete terminal insertion.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Certifications: IP67/IP69K (when mated)
Technical Specifications
| Item | Specifications | Conditions |
|---|---|---|
| Rated Current | 2A (All pins power supply) / 5A (Single pin power supply) | |
| Operating Temperature | -40 to +125 (Includes the temperature rise by current flow) | |
| Storage Temperature | -10 to +60 | (Note 1: For long-term storage of unused products) |
| Rated Voltage | 60V AC/DC | |
| Storage Humidity Range | Relative humidity 85% or less (no condensation) | (Note 1) |
| Contact Resistance | 8m Max. | Measured at 1A DC |
| Insulation Resistance | 100M Min. | Measured at 500V DC |
| Withstanding Voltage | There shall be no dielectric breakdown. | Apply 1000V AC for 1 min. |
| Mating Durability | Contact Resistance: 16m Max. No damage, cracks or component breakage. | 30 mating cycles (insertion/extraction) |
| Vibration Resistance | No electrical discontinuity of 7 or more for 1s or more. Contact Resistance: 16m Max. No damage, cracks or component breakage. | Frequency: 20 to 200Hz (acceleration: 88m/s2) 3 minutes per cycle (Repeated) 3 directions, 3 hours each. |
| Lock Strength | 100N Min. | Breaking strength of the lock is measured while pulled in the direction of the mating axis |
| Humidity Resistance | Contact Resistance: 16m Max. Insulation Resistance: 100M Min. | Left at a temperature of 85 for 96 hours with a relative humidity of 90 to 95% |
| Thermal Shock | Contact Resistance: 16m Max. No damage, cracks or component breakage. | Temperature -40C Room temperature 125C Room temperature. Time: 30 5 30 5 minutes for 1000 cycles |
| Heat Resistance | Contact Resistance: 16m Max. No damage, cracks or component breakage. | Left at a temperature of 140 for 120 hours |
| Cold Resistance | Contact Resistance: 16m Max. No damage, cracks or component breakage. | Left at a temperature of -40 for 120 hours |
| Sulfurous Acid Resistance | Contact Resistance: 16m Max. | Left unmated in sulfurous acid gas for 96 hours at a room temperature with a concentration of 25ppm and a humidity of 75% RH or higher |
| High Pressure Washing Resistance | No water infiltration into panel. Insulation Resistance: 100M Min. | After heating for 120 hours at 120, spray for 30 sec. at a temperature of 80 and water pressure of 10MPa at positions 1 through 4. Rotate the mounting table at a speed of 5r/min |
Materials / Finish
| Product Component | Part Material | Finish |
|---|---|---|
| Female Connector Housing | PA Resin | Black or Gray |
| Retainer | PA Resin | Beige |
| Seal Cover | PBT Resin | Gray |
| Housing Seal | Silicone Rubber | Rouge |
| Wire Seal | Silicone Rubber | Rouge |
| Male Connector Housing | PA Resin | Black or Gray |
| Retainer | PA Resin | Beige |
| Panel Seal | Silicone Rubber | Rouge |
| Waterproof Cap | PBT Resin | Brown |
| Contacts (Female, Male) | Copper Alloy | Tin Plating |
Product Number Structure
Series Name: ZE064W
No. of Pos.: 8, 14, 24pos.
Rows: D (double-row)
Connector Type: P (Male), S (Female)
Housing with Retainer
Mating Key: (A), (B)
Product Configuration
Male Connector Completed
Female Connector Completed
Mating Table
| Male Connector Housing/Retainer | Male Terminal | Female Connector Housing/Retainer | Female Terminal |
|---|---|---|---|
| ZE064W-8DP-HU/R | ZE064-2022PCF | ZE064W-8DS-HU/R | ZE064-2022SCF |
| ZE064W-14DP-HU/R | ZE064-2022PCF | ZE064W-14DS-HU/R | ZE064-2022SCF |
| ZE064W-24DP-HU/R | ZE064-2022PCF | ZE064W-24DS-HU/R | ZE064-2022SCF |
Male Housing / Retainer Part Numbers
| Part No. | HRS No. | Key | No. of Pos. | A | B | C | Sales Unit |
|---|---|---|---|---|---|---|---|
| ZE064W-24DP-HU/R(A) | 753-2003-0 | (A) Key | 24 | 68.8 | 54.3 | 34.1 | 250pcs |
| ZE064W-24DP-HU/R(B) | 753-2004-0 | (B) Key | 24 | 68.8 | 54.3 | 34.1 | 250pcs |
| ZE064W-14DP-HU/R(A) | 753-2008-0 | (A) Key | 14 | 57.8 | 43.3 | 23.1 | 300pcs |
| ZE064W-14DP-HU/R(B) | 753-2009-0 | (B) Key | 14 | 57.8 | 43.3 | 23.1 | 300pcs |
| ZE064W-8DP-HU/R(A) | 753-2013-0 | (A) Key | 8 | 51.2 | 36.7 | 16.5 | 350pcs |
| ZE064W-8DP-HU/R(B) | 753-2014-0 | (B) Key | 8 | 51.2 | 36.7 | 16.5 | 350pcs |
Female Housing / Retainer Part Numbers
| Part No. | HRS No. | Key | Position | No. of Pos. | A | Sales Unit |
|---|---|---|---|---|---|---|
| ZE064W-24DS-HU/R(A) | 753-2005-0 | (A) Key | 24 | 38.5 | 275pcs | |
| ZE064W-24DS-HU/R(B) | 753-2006-0 | (B) Key | 24 | 38.5 | 275pcs | |
| ZE064W-14DS-HU/R(A) | 753-2010-0 | (A) Key | 14 | 27.5 | 480pcs | |
| ZE064W-14DS-HU/R(B) | 753-2011-0 | (B) Key | 14 | 27.5 | 480pcs | |
| ZE064W-8DS-HU/R(A) | 753-2015-0 | (A) Key | 8 | 20.9 | 600pcs | |
| ZE064W-8DS-HU/R(B) | 753-2016-0 | (B) Key | 8 | 20.9 | 600pcs |
Waterproof Pin Part Numbers
| Part No. | HRS No. | Sales Unit |
|---|---|---|
| ZE064W-WCP(2022) | 753-2007-0 | 1000pcs per bag |
Note: This part is used only with the female connector.
Male Terminal
| Part No. | HRS No. | Type | Finish | Sales Unit |
|---|---|---|---|---|
| ZE064-2022PCF | 753-2002-0 | Reel Terminal | Tin Plating | 15,000 pcs per reel |
Note 1: The applicable cables are 0.3sq and 0.5sq.
Note 2: Any problems that occur from using tools other than those specified by Hirose are not covered by warranty.
Female Terminal
| Part No. | HRS No. | Type | Finish | Sales Unit |
|---|---|---|---|---|
| ZE064-2022SCF | 753-2001-0 | Reel Terminal | Tin Plating | 13,000 pcs per reel |
Note 1: The applicable cables are 0.3sq and 0.5sq. To ensure waterproof performance the applicable cable diameter range is limited from 1.4 to 1.7mm.
Note 2: The female terminal is a waterproof design and is a clean body without a stabilizer. Therefore if inserted in the opposite direction it can be inserted at a force of more than 10N so be careful.
Note 3: Any problems that occur from using tools other than those specified by Hirose are not covered by warranty.
Applicable Applicator Tool
| Type | Part No. | HRS No. | Applicable Terminal | Sales Unit |
|---|---|---|---|---|
| Crimp Machine | CM-105C | 901-0001-0 | Male Terminal/ Female Terminal | |
| Applicator for HRS Crimping Machine | AP105-ZE064-2022S | 901-5241-0 | Female Terminal ZE064-2022SCF | |
| Applicator for HRS Crimping Machine | AP105-ZE064-2022P | 901-5242-0 | Male Terminal ZE064-2022PCF | |
| Hand Tool | HT802/ZE064-2022S | 780-0046-0 | Female Side ZE064-2022SCF | |
| Hand Tool | HT802/ZE064-2022P | 780-0047-0 | Male Side ZE064-2022PCF | |
| Retainer Release Tool | ZE064W-DS-HU/R/CV-MD | 902-5151-0 | Female Side | |
| Retainer Release Tool | Male Side Can release manually | |||
| Terminal Extraction Tool | ZE064-S/RE-MD | 902-5150-0 | Female Terminal ZE064-2022SCF | |
| Terminal Extraction Tool | ZE064-P/RE-MD | 902-5149-0 | Male Terminal ZE064-2022PCF |
Note 1: Any problems that occur from using tools other than those specified by Hirose are not covered by warranty.
Note 2: Hand tools are developed as a prototype tool during product development. Use an applicator for mass production.
Note 3: Cut the reel terminal for use with the hand tool.
Note 4: Crimping work shall be conducted in accordance with the "Crimping Standard" and "Crimping Conditions Table".
Usage Precautions
Contact Extraction Tool: ZE064-P/RE-MD, ZE064-S/RE-MD
Applicable Crimp Contacts: ZE064-2022PCF, ZE064-2022SCF
Operation Method: To repair, pull out the contact while pressing the extraction tool in the direction shown in the diagram below. Be careful not to deform the terminal lock or contact portion.
Caution: Do not push the terminal locking part or contact. It may lead to deformation or damage to the housing and other parts.
Usage Environment
2410010331_HRS-ZE064W-14DS-HU-R-B_C17400247.pdf
Connector HRS DF22-2EP-7.92C engineered for automotive and applications requiring high reliability
High reliability automotive connector HRS DF1B-34DS-2.5RC suitable for demanding equipment applications
Durable HRS ZG05L2-16P-1.8H connector for automotive requiring high reliability and RoHS2 conformity
HRS DF14-5S-125C 125 millimeter pitch crimp connector with four wall box header preventing mis insertion
High reliability automotive connector HRS DF57H-6S-1.2C for demanding device applications
connection solution HRS HIF3BA-26D-2.54C ribbon cable connector compliant with MIL standard and UL certified
Connector for automotive equipment HRS DF1B-6S-2.5R ensuring high reliability in device applications
automotive connector HRS DF50A-12S-1C with strong electrical current capacity and mechanical durability
High reliability connector HRS DF13-12S-1.25C suitable for automotive equipment
