Engineering Plastic Case Microwave Switch Connector muRata MM8430-2610RB3 SWD Type Receptacle Coaxial
Manufacturer:
muRata
Description:
Connector Receptacle Female Pin 50Ω Surface Mount
Category:
Coaxial Connector (RF) Accessories/Coaxial Connector (RF) Assemblies
Specifications
Number Of Ports:
1
Interface:
内孔
RF Series:
-
Connector Type:
板端
Style:
-
Operating Temperature:
-40℃~+85℃
Frequency:
6GHz
Impedance:
50Ω
Interface Diameter:
2.1mm
Mfr. Part #:
MM8430-2610RB3
Package:
SMD
Model Number:
MM8430-2610RB3
Introduction
Product Overview
This product specification applies to the SWD type receptacle, a microwave switch coaxial connector. It is designed for applications requiring specific electrical and mechanical performance ratings. Please contact the manufacturer for usage in applications not described herein.
Product Attributes
- Connector Type: SWD type receptacle
- Part Numbers: MM8430-2610B, MM8430-2610RA1, MM8430-2610RB3
- Packaging: Bulk Package, 178 mm dia. reel (1000 pcs/reel), 330 mm dia. reel (3000 pcs/reel)
- Material (Inner Terminal R): Copper Alloy
- Plating (Inner Terminal R): Gold Plating
- Material (Inner Terminal C): Stainless Steel
- Plating (Inner Terminal C): Gold Plating
- Material (Outer Terminal): Copper Alloy
- Plating (Outer Terminal): Silver Plating
- Material (Case 1): Engineering Plastic
- Material (Case 2): Engineering Plastic
Technical Specifications
| Item | Specification | Test Method/Conditions |
|---|---|---|
| Ratings | ||
| Voltage Rating | 250V r.m.s. maximum | |
| Nominal Frequency Range | DC to 6GHz | |
| Nominal Impedance | 50 | |
| Temperature Rating | -40C to +90C | |
| Electrical Performance | ||
| Insulation Resistance | 500 M minimum | MIL-STD-202, Method 302 (DC 250V+/-25V, 1min) |
| Withstanding Voltage | No evidence of breakdown | MIL-STD-202, Method 301 (AC 300V+/-20V r.m.s, 1min) |
| Contact Resistance | Initial: 50m max. (60m max.)*1 | MIL-STD-1344 Method 3002.1 (1,000Hz, 150mA max., 200V max. voltage drop) |
| After test: 120m max. (130m max.)*1 | ||
| Voltage Standing Wave Ratio (V.S.W.R.) | 1.2 max. (DC3GHz) 1.3 max. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Isolation | 20dB min. (DC3GHz) 15dB min. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Insertion Loss | 0.1dB max. (DC3GHz) 0.2dB max. (3GHz 6GHz) | Frequency: 0.1GHz to 6.0GHz |
| Mechanical Performance | ||
| Engage and Disengage Force | Engagement: 30N maximum Disengagement: 5N minimum - 40N maximum | |
| Connector Durability | No evidence of visual or mechanical damage and meet contact resistance and engage/disengage force specifications. | 500 cycles of mating and withdrawal at 12 cycles/min maximum. |
| Adhered Force of Electrode Terminal | No excoriation of electrode terminal. | Force: 50N, Time: 5s+/-1s, Direction: Vertical against PCB, Solder: Sn-3.0Ag-0.5Cu, Thickness: 150m |
| Strength of PCB Bending | No excoriation of electrode terminal. | PCB Thickness: 1.6mm, Speed: 1.0mm/s, Bend: 1.0mm, Time: 30s, Solder: Sn-3.0Ag-0.5Cu, Thickness: 150m |
| Solderability | At least 95% covered by a continuous new solder coating. | MIL-STD-202, Method 208 (Solder: Sn-3.0Ag-0.5Cu, Flux: Rosin 25%, IPA 75%, Temperature: 245C, Time: 3s) |
| Resistance to Soldering Heat | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | Reflow soldering by FIGURE 8. Measurement after 24h+/-2h. |
| Environmental Performance | ||
| Moisture Resistance | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | MIL-STD-202, Method 103, Test Condition B (Temperature: 60C, Humidity: 95% RH, Time: 96h) |
| Thermal Shock | No evidence of mechanical damage, and meet insulation resistance, withstanding voltage and contact resistance specifications. | MIL-STD-202, Method 107 (50 cycles: -40C to 90C) |
| Vibration | No electrical interruption exceeding 10s and no evidence of visual or mechanical damage and meet the requirement of the center contact resistance. | 3 mutually perpendicular directions, Sweep: 10Hz100Hz10Hz (20 min) |
| Mechanical Shock | No electrical interruption exceeding 10s and no evidence of visual or mechanical damage and meet the requirement of the center contact resistance. | MIL-STD-202, Method 213, Test Condition B (Acceleration: 750m/s, Peak Duration: 6ms, Waveform: Half-sine) |
| Dimensions | ||
| Carrier Tape Dimensions | See FIGURE 4. | |
| Reel Dimensions | See FIGURE 5. | |
2410121621_muRata-MM8430-2610RB3_C91634.pdf
Related Products
Coaxial cable connector muRata MM4829-2702RA4 with VSWR 1.3 max and frequency range DC to 3 gigahertz
Connector Receptacle IPEX Male Pin 50Ω Surface Mount
microwave coaxial connectors muRata MM8030-2610RJ3 offering compact size and low insertion loss for RF applications
Connector Receptacle 50Ω Surface Mount
muRata MM8030 2610RK0 SWG VE Series RF Test Switch for Cellular WiFi Bluetooth and GPS Applications
Connector Receptacle Female Pin 50Ω Surface Mount
Small size microwave coaxial connector Murata MM8130-2600RA2 with surface mount design and low insertion loss
Connector Receptacle Female Pin 50Ω Surface Mount
Compact microwave coaxial connectors muRata MM8430-2610RA1 suitable for in cellular phones tablets and pcs
Connector Receptacle Female Pin 50Ω Surface Mount
Coaxial Connector muRata MM8130-2600RB8 with Gold Plating and Packaging of 8000 Pieces on 330 mm Diameter Reel
Connector Receptacle Female Pin 50Ω Surface Mount
Microwave coaxial connectors muRata MM8930-2620RJ4 designed for and high frequency signal transfer
Connector Receptacle 50Ω
Ceramic Capacitors muRata MM7831-2700RJ5 Offering Low ESR and High Capacity for Electronic Circuits
1 Board Side -40℃~+85℃ 6GHz 50Ω Coaxial Connector (RF) Assemblies RoHS
Single Layer Microchip Capacitor Murata MM4831-2701RJ4 Designed for Compact Circuit and High Frequency
1 Board Side 6GHz 50Ω Coaxial Connector (RF) Assemblies RoHS
Send RFQ
Stock:
MOQ:
