Connector OUPIIN 2011-1X02G00SB 2011 Series Pin Header 2.54mm Pitch Single Double Triple Row
Manufacturer:
OUPIIN
Description:
2P Gold Brass -40℃~+105℃ Pin Header Black 2.54mm 2.5mm 6.1mm 3mm 1 3A Through Hole Through Hole,P=2.54mm Headers, Male Pins RoHS
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Number Of Pins:
2P
Contact Plating:
金
Contact Material:
黄铜
Operating Temperature:
-40℃~+105℃
Circluar Pins/Square Pins:
方针
Color:
黑色
Pitch:
2.54mm
Insulation Height:
2.5mm
Length Of Mating Pin:
6.1mm
Voltage Rating (Max):
-
Length Of End Connection Pin:
3mm
Number Of Rows:
单排
Current Rating-Signal:
3A
Mounting Type:
直插
Mfr. Part #:
2011-1X02G00SB
Package:
Through Hole,P=2.54mm
Model Number:
2011-1X02G00SB
Introduction
OUPIIN 2011 Series Pin Header
The OUPIIN 2011 Series Pin Header is a 2.54mm pitch connector available in single, double, and triple row configurations. It supports both straight and right-angle mounting with a solder-type termination. Designed for reliable electrical connections, this series is suitable for various electronic applications requiring robust and precise interconnects.
Product Attributes
- Brand: OUPIIN
- Product Name: 2011 Series Pin Header
- Pitch: 2.54mm
- Configuration: Single/Double/Triple Row
- Mounting Type: Straight/Right Angle
- Termination Type: Solder Type
- Certifications: RoHS
Technical Specifications
| Product Name | Part No. | Drawing No. | Rating Current | Rating Voltage | Storage Temperature | Operating Temperature |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)Sx-x | 2011D01042 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)RB | 2011D01003 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)LB | 2011D01105 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxG00RW-4-4-0.4B | 2011D01077 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)SB | 2011D01004 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)RB | 2011D01102 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)SB | 2011D01005 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)RB | 2011D01103 | 3A | 110V AC | 0~+40 | -40~+105 |
Performance and Test Description
Mechanical & Electrical Characteristic
The connector shall have the mechanical and electrical performance as described in drawing.
Solderability
Connectors meet solder-ability to EIA-364-52 and shall be free of contaminants. A minimum of 95% solder coverage is required after testing with a soldering time of 3 to 5 seconds at 2455.
Resistance to Solder Heat
Each solder cycle consists of three consecutive phases as shown in Table II.
Performance Requirements (Table I)
| Item | Requirements | Test Methods |
| Confirmation of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| Contact Resistance | 20 m Max. | Subject mated contacts assembled in housing to open circuit of 100 mA max., 20 mV max. Per EIA-364-06 |
| Insulation Resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. (500V DC) Per EIA-364-21 |
| Dielectric Withstanding Voltage | After testing, there shall be no breakdown. | Connector must withstand test potential of 1000V AC for 1 minute. Per EIA-364-20 |
| Retention Force | 0.8 Kg/pin. Min | Apply axial pullout force at the speed rate of 25.4 mm/minute. Per EIA-364-29 |
| Solder ability | There shall have a solder coverage of 95% minimum. | Soldering time: 3 to 5 seconds. Temperature: 2455 Per EIA-364-52 |
2504101957_OUPIIN-2011-1X02G00SB_C3339504.pdf
Related Products
2.54mm Pitch Pin Header Connector OUPIIN 2011-1X02G00SI032B Single Double Triple Row Solder Type
Pin Header 2 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
2.54mm Pitch Pin Header Connector OUPIIN 2011-1X40G00SB Single Double Triple Row Solder Termination
Pin Header 40 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
Connector Pin Header 2.54mm Pitch OUPIIN 2011-1X20G00SC028B Single Double Triple Row Straight Angle
Pin Header 20 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
electronic connector OUPIIN 2011-1X01TSB 2011 Series Pin Header 2.54mm pitch single double triple row
Pin Header 1 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
2.54mm Pitch Pin Header Connector Single Double Triple Row Straight Right Angle OUPIIN 2011-1X16G00SO028B Solder Type
Pin Header 16 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
Pin header connectors with 254mm pitch from OUPIIN 2011-1X01G00SC028B series in single double and triple row configurations
Pin Header 1 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
Connector OUPIIN 2011-1X14G00SK028B 2011 Series Pin Header 2.54mm Pitch Single Double Triple Row Solder Type
14P Gold Brass -40℃~+105℃ Pin Header Black 2.54mm 2.5mm 6.1mm 3mm 1 3A Through Hole Through Hole,P=2.54mm Headers, Male Pins RoHS
2011 Series Pin Header Connector OUPIIN 2011-1X03G00SC028B 254mm Pitch Single Double Triple Row
Pin Header 3 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
Pin Header Connector 2.54mm Pitch Single Double Row Solder Type OUPIIN 2011-1X04G00S-2.9-7B-HT-P5.08
Headers, Male Pins RoHS
Precision 254mm Pitch Pin Header OUPIIN 2011-1X06G00SB from 2011 Series with Electrical Connections
Pin Header 6 Position 2.54mm Pitch Single Row Through Hole -40℃~+105℃
Send RFQ
Stock:
MOQ:
