Push Push SIM Card Socket Surface Mount SMT Lateral Insertion SOFNG SIM 024X Electrical Performance
Product Overview
This product is a Push-Push type memory card socket designed for SIM card applications. It offers reliable electrical performance with low contact resistance and high withstand voltage. The durable design supports a significant number of insertion cycles under both no-load and rated-load conditions. It is suitable for surface mount (SMT) applications with lateral insertion and is manufactured to be RoHS compliant, indicating environmental consciousness.
Product Attributes
- Operation: Push-Push
- Type: SIM Card Socket
- Mounting: Surface Mount (SMT)
- Insertion: Lateral
- Compliance: RoHS
Technical Specifications
| Specification | Model A [better product] | Model B [average product] | Model C [low product] |
|---|---|---|---|
| Item No. | SIM-024 (6+2P) | SIM-024 (6+2P) | SIM-024 (6+2P) |
| Initial Contact Resistance | 30m max. | 30m max. | no data! |
| Contact Resistance (100V DC) | 100m min. | Skey/PD50m min. | no data! |
| Withstand Voltage | 300V AC for 1min | 250 V AC for 1min | no data! |
| Durable Performance (No Load) | 7,000 Cycles | 5,500 Cycles | no data! |
| Durable Performance (Rated Load) | 5,500 Cycles | 4,500 Cycles | no data! |
| Rated Load Contact Resistance | 50m max. | 50m max. | no data! |
| Insertion Force | 4.0Kgf MAX | no data! | no data! |
Pin Assignment (SD CARD)
| Pin No. | Pin NAME | Type | Description |
|---|---|---|---|
| C | VCC | 1 | (Card Power) |
| C | RST | 1 | (Reset) |
| C | CLK | 1 | (Clock) |
| C | Reserved | 1 | (Reserved) |
| C | GND | 1 | (Ground) |
| C | VPP | 1 | VPP |
| C | I/O | 1 | / (Input/Output) |
| C | Reserved | 1 | (Reserved) |
Transportation Handling
During transportation, this product should not come into direct contact with water, acidic or alkaline chemical substances, or be placed in environments containing such gases. Care must be taken to prevent slipping or tipping. Avoid collisions or squeezing during transit. Maintain a moderate temperature and humidity (normal temperature 25, humidity within 50) to prevent material deformation or oxidation.
Disposal Handling
This product is not classified as hazardous waste. When disposing of it, you may entrust a recycling company for recovery and reprocessing.
Notices
- The company reserves the right of final interpretation.
- Leaked and reproduced documents are prohibited.
- Modifications without authorization are invalid.
2410121625_SOFNG-SIM-024X_C444922.pdf
Durable SMT Mounting MicroSD Card Socket with Stainless Steel Spring and Lateral Insertion
SMT Push-Push Memory Card Socket with 1.5mm Height for Micro-SIM Cards in Consumer Electronics
Short Body SMT Push-Pull T-Flash Memory Card Socket with RoHS Compliance for Consumer Electronics
Hinge-type Operation SIM Card Socket with Surface Mount (SMT) and Lateral Introduction for MiniSIM Cards
Switch Connector SNO-018 with Up Height Configuration and 1.44mm Height Above Board in SMD Package for NanoSIM Card
Durable push-push SD card socket with surface mount technology and RoHS compliance for compact electronics
SMD SIM Card Socket with Phosphor Bronze Terminal, PBT+30%GF Cover, and 3.12mm Height for MicroSIM Cards
Surface Mount (SMT) RoHS Compliant Lateral Insertion Memory Card Socket for SD Cards with Push-Pull Operation
NANO-SIM Socket with Push-Pull and Lateral Operation for Reliable Performance and RoHS Compliant
