Durable audio signal connector JINJIA XLR-23B rated 250V AC 15A suitable for electronic applications
Manufacturer:
JINJIA
Description:
Through Hole Circular Connector Assemblies RoHS
Category:
Circular Connector Assemblies/Circular Connector Assemblies
Specifications
Mfr. Part #:
XLR-23B
Package:
Through Hole
Model Number:
XLR-23B
Introduction
Product Overview
This specification applies to XLR jack (SPEAKON) connectors used in electronic products. These connectors are designed for audio signal applications and are not to be used as AC mains or power supply connectors.
Product Attributes
- Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
- Origin: China
- Document Number: JJR-WI-48
- Issue Date: 2008-09-10
- Version: A1
Technical Specifications
| Item | Property | Test Condition | Performance |
| 2. Rated / | |||
| 2-1. Practical temperature range | Applicable temperature range | -30 to +80 | |
| Humidity range | 85% RH.MAX. | ||
| 2-2. Preservation temperature range | Storage temperature range | -10 to +40 | |
| Humidity range | 85% RH.MAX. | ||
| Storage environment | Ambient air without acid, alkaline or other corrosive gases. Storage period not exceeding 180 days. | ||
| 2-3. Rated voltage and current (MAX.) | Maximum rated voltage and current | (continuous) | 250V AC, 15A |
| Audio signal | Duty cycle 50% | 30A | |
| Attention | Warning | SPEAKON is NOT to be used as an AC mains or power supply connector! | |
| 2-4. Appearance | Surface condition | No scratches, soil, rust or discoloration. | |
| 4. Electrical efficiency / | |||
| 4-1 Withstand Voltage | Withstand AC voltage | Between two non-contact terminals for 1 minute | 4000V (50/60Hz RMS). No dielectric breakdown shall occur. |
| 4-2 Insulation Resistance | Insulation resistance | Apply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds. | 1000 M Min. |
| 4-3 Contact Resistance | Contact resistance | Measure the tail end of each terminal (voltage maximum 20mV, current maximum 100mA) | 30 m MAX. |
| 5. Mechanical Performance / | |||
| Terminal Strength | Terminal strength | Withstand a force of 0.5 kgf for 10 seconds. | No looseness, damage, etc. Terminal deformation is acceptable. |
| 6. Durability / | |||
| Life test | Durability | Under no load, rotate and then plug in/out with a matching plug for 5000 times at a frequency of 5 times per minute. | Appearance with no obvious change or destruction. Contact resistance: less than 50 m. |
| 7. Solderability / | |||
| 7-1 Resistance to soldering heat | Heat resistance | Dip terminal in solder at 2603 for 51 seconds. | Plastic base should not be deformed and terminals should not fall off. |
| 7-2 Solderability | Solderability | Dip in solder at 2453C for 30.5 seconds. | Solder coating area should be more than 95%. |
| 8. Environment test / | |||
| 8-1 Cold test | Low temperature test | Place housing at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour and test. | Appearance with no obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| 8-2 Heat test | High temperature test | Store housing at 802 for 96 hours, then under standard atmospheric conditions for 1 hour and test. | |
| 8-3 Humidity test | Humidity resistance test | Store housing at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour and test. | Appearance with no obvious change. Contact resistance: 50m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V. |
| 8-5 Salt spray test | Salt spray test | Temperature: 35 2. Solution: 5 1%. Spray time: 24 hours. Wash and dry at room temperature after the experiment. | No obvious rust in the appearance. |
| 9. Test condition / | |||
| General test conditions | Temperature, Humidity, Atmospheric Pressure | Unless otherwise specified: 15C to 35C, 25% to 85% RH, 86 kPa to 106 kPa. For judgment doubts: 201C, 63% to 67% RH, 86 kPa to 106 kPa. | |
| 10. Amendment / | |||
| Specification Amendment | Procedure | Must be negotiated and agreed by the manufacturer and the customer before proceeding. | |
2411220731_JINJIA-XLR-23B_C558747.pdf
Related Products
electronic connector JINJIA XLR-19-6P designed to meet strict environmental and durability standards
Through Hole Circular Connector Assemblies RoHS
Durable XLR jack combo JINJIA XLR-19P-10P designed for stable audio connections in electronic devices
Through Hole Circular Connector Assemblies RoHS
electrical JINJIA XLR-26A-10P XLR jack combo connector rated voltage 50V AC 3A and 7.5A for electronic
Through Hole Circular Connector Assemblies RoHS
Speaker socket connection XLR jack combo JINJIA XLR-11W-N3B ideal for electronic device applications
Through Hole Circular Connector Assemblies RoHS
Durable JINJIA XLR-19P-7P XLR jack connector designed for stable electrical and mechanical performance
Through Hole Circular Connector Assemblies RoHS
XLR jack connector JINJIA XLR-14-N3B designed for stable performance in electronic product applications
Through Hole Circular Connector Assemblies RoHS
XLR jack combo connector JINJIA XLR-26A-7P-N3B rated for 3A and 7.5A current electronic applications
Through Hole Circular Connector Assemblies RoHS
Electronic XLR Jack Connector JINJIA XLR-15-N3GR Rated Voltage 50V AC And Current 6A For Industrial
Through Hole Circular Connector Assemblies RoHS
Electronic connector JINJIA XLR-26AP-10P optimized for dependable audio signal performance in devices
Through Hole Circular Connector Assemblies RoHS
electrical connector JINJIA XLR-25-N3B rated 50V AC 6A operating temperature range minus 30 to plus 80 degrees
Through Hole Circular Connector Assemblies RoHS
Send RFQ
Stock:
MOQ:
